Question about 2003 Yamaha YZ 250

2 Answers

Yamaha warrior chain.

I have a 03 yamaha warrior 350, My old chain was lose and came off and broke. I got a new chain with the same number of links as my old one but it is to short by a link or two. I tighten the old chain with the chain tightener on the axle but im not sure how to move it back to where it was?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 29 Answers

HELLO; Heres all you should have to do this,set your quad up on a atv jack or on a milk cartoon.Loosen the four bolts that hold the rear bearing carrior and back off your adjusters then push the carrier forward till it stops,relay your chain and adjust it leaveing a little slack, tighten your mounting bolts then, something I do, spin the rear tires to see if the slack is right if not loosen the bolts and proceed again with the proceedure turning out the adjusters a little more look at the chain as you dothis and you will see the slack in the chain on the top. GOOD LUCK.

Posted on Oct 01, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

The axle mounts on the frame offset(eccentric) and if you rotate the axle assembly (after you loosen the clamps) you should be able to see the tension change. The old ones were like that anyway, hope it helps.

Posted on Jun 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I test the stator coil on a yamaha warrior 350 electric start


hi .. go straight to here .. youtube link. http://www.youtube.com/results?search_query=yamaha+350+warrior+stator+test
yamaha 350 warrior stator test YouTube

Jul 20, 2014 | Motorcycles

1 Answer

Will a yamaha 350 warrior cdi work on a yamaha 350 motot 4 they look exatly the same


I would call the dealer and have them check the part numbers. If the part numbers match then yes you can. Alot of the time the only difference is the connector. Yamaha has alot of interchangeable parts but the safest way is to verify the part numbers. If you just " try it " and they don't match you just may have fried the cdi box and you'll be trying to troubleshoot a bad part that you think is bad.

Nov 15, 2013 | 2008 Yamaha YZF-R15

1 Answer

Yamaha warrior 350 won't turn over


Hi, Anonymous and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Tip over sensor needs a reset.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
warrior 350 trouble starting turning over
ATV Connection
Yamaha YFM350X Warrior Service Manual
OEM parts for Yamaha
Yamaha WARRIOR YFM350X Owner Manual

Apr 07, 2013 | 2006 Yamaha Warrior Base

1 Answer

1989 Yamaha TW 200 remove rocker arm


Hi, Sam21_1 for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
yamaha warrior rocker arm
yamaha warrior 350 rocker arms part 2
Yamaha TW200 Service Manual
OEM parts for Yamaha
YAMAHA TW200E Owner Manual

May 01, 2010 | 2001 Yamaha TW 200

1 Answer

I have a 2002 yamaha yfm 350 warrior, how do i find the chain size on its chain? On the sprocket it simply says 40, what does this number mean?


the 40 simply states that it is a 40 tooth sprocket. The stock chain size for that atv is a 98 link 520 chain.

Feb 04, 2010 | 2002 Yamaha Road Star Warrior

4 Answers

My 2001 Yamaha warrior yfm 350 makes a loud ticking noise coming from the motor, what is wrong with it????


had the same thing on my 350 the adjustment screw for the valves had backed out had to readjust them and replace lock nuts

Nov 03, 2009 | 2002 Yamaha Road Star Warrior

1 Answer

Timing chain


you need a fly wheel puller.

Jul 30, 2009 | 2003 Yamaha YZ 250

1 Answer

Im rebuilding my warrior


if your using the old bolts, 35 ft/lbs. if new bolts, 25 ft/lbs. that will work just fine.

May 10, 2009 | 2001 Yamaha TW 200

1 Answer

QUAD QUESTION! 1998 yamaha warrior 350 bogging down


I had a problem somewhat the same.

Make sure the air-intake boot has no holes in it.

Apr 18, 2009 | 2002 Yamaha Road Star Warrior

Not finding what you are looking for?
2003 Yamaha YZ 250 Logo

1,494 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...