Question about 1992 Suzuki GSX-R 750 WN

1 Answer

How do i test my CDI unit? Shindengen CF405J.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

The only way to test this unit is to take it off and bring it inn to a dealer that has the proper testing equipment but more often will haft to be sent into the manafacture of the CDI unit to be tested if it is working properly. Unfortunanlty the equipment to test the CDI unit is extremely expensive and most small dealers dont carry the equipment to test all these different units besides yours. The only way to do this is to get the unit to the proper testing equipment. Unfortunantly you will haft to toake there word for it but usually if this fails the bike will run erracticlly or not at all. Good luck.

Posted on Jun 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a shindengen CI760A fitted to my CRF230 can anyone tell me if this is a standard fitting or an up rated fitting


Hi, Brenda assuming this is a CDI you are inquiring about there are no specs available, for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your problem. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
CRF230F service manual repair 2003 2015 CRF230 Download Manuals Technical
http://www.partsfish.com/page/oem-parts-for-honda
Honda CRF230F Owner Manual
2009 Honda CRF230F

May 15, 2016 | 2009 Honda CRF230F

1 Answer

Is there any other cdi units that will work on a 1986 gs850g motorcycle


Hi Alan it's either the pick up coils on the motor or the cdi unit or wiring

Mar 18, 2015 | Suzuki Motorcycles

2 Answers

How do i test my cdi unit


try change your spark plug first in case it is not your cdi unit.

Feb 21, 2015 | 2003 Suzuki RM 250

1 Answer

How do i test my cdi unit


Some CDI units can be tested by a dealer. They are not repairable.

Feb 21, 2015 | 2003 Suzuki RM 250

1 Answer

Replace the cdi unit on a vespa lx 125 2005


Pretty straight forward, unbolting the cdi off the frame and replacing one wire at a time. Buying a service manual from say amazon for $20-25 bucks is the best investment you can make. It will offer other testing to be sure it's the cdi which is expensive, and be sure something isn't causing the cdi to burn out, once you take it out of the box it's yours, no returns on electrical parts.

Sep 27, 2014 | Motorcycles

1 Answer

How do I replca the cdi unit


straight forward, changing over one wire at a time. I'd buy a service manual, it will offer test procedures to be sure it's the cdi that's bad (the most expensive part of an ignition), and other tests to be sure a new cdi won't up and burn out.

Sep 27, 2014 | Motorcycles

2 Answers

There is no spark coming from the spark plug(new), there is power coming to the cdi, but none coming from the coil from the cdi unit


It sounds like either the cdi has become faulty, or it is imobilised due to either the safety switch on clutch lever, side. Stand, ignition switch, or engine kill switch, the only way to test the cdi is to replace it, some circuit tests on the unit may be possible, but only a new unit will eliminate the fault

Aug 14, 2011 | 2011 Yamaha TZR50

1 Answer

I was told the CDI unit on a 1980 Honda CX 500 is bad... how do I test it to be sure? Thanks


Takes special equipment to test the CDI ... does your bike start? run? if not ... there is that possibility that who ever told you it is bad is correct.

Oct 05, 2010 | 1980 Honda CX 500 A

1 Answer

My 1981 Suzuki GS1000G has no spark on 3 of the 4 cylinders


cdi unit get the manufacturers to test the cdi out and get back to me

Sep 28, 2009 | 1981 Suzuki GS 750 L

2 Answers

83 yamaha tt600e no spark


I WILL TAKE A WILD SHOT AT THIS
MT EXPERIANCE WITH YAMAHAS IS GOING TO MAKE ME SAY CDI IS BAD.

ONE WAY OF QUICKLY CHECKING THIS IS KICK IT ARE TRY TURNING THE ENGINE OVER WITH THE STARTER..NOW IT WILL HAVE TO TURN OVER QUICKLY SO IF THE BATTERY IS DOWN USE THE KICK STARTER.AS YOU ARE DOING THIS TURN THE KILL SWITCH ARE THE BUTTON OFF AND ON IF GIVES YOU A SPARK MOST LIKELY IT'S THE CDI. NOW IT WILL NOT SPARK EVERY TIME WHEN YOU ARE TRYING THIS

**CAUTION** I HAVE SEEN THE PLUGS THAT CONNECT TO THE CDI BE BAD SO DO A CONTNUITY TEST ON THE CONNECTIONS GOING TO THE CDI AND ANY OTHER ELECTRICAL CONNECTION

**CAUATION** BAD SPARK PLUG CAPS YOU CAN ACTUALLY SCREW THE PLUG INTO THE COIL WIRE IT'S SELF.TO TEST THAT

GET A GOOD 12 VOLT TEST LIGHT AND FIRST TEST YOUR FIELDS COMING UP FROM YOUR FLYWHEEL AREA.YOU CAN GET THE LIGHT TO LIGHT UP THEN YOU HAVE YOUR MAIN POWER SUPPLY DELIVERING.NEXT CHECK TO SEE IF YOU ARE GETTING 12 VOLTS TO YOUR COIL.MAKE SURE YOUR BATTERY IS IN GOOD SHAPE ALSO.

NOW TO TEST THE COIL I CAN NOT GO INTO HOW TO BENCH TEST IT NOW.THE FIRST THING IS TO LOOK VERY GOOD TO SEE IF ANY OIL IS LEAKING FROM IT.LOOK GOOD IT WILL BE VERY LIGHT.IF SO YOU WILL END UP HAVING TO REPLACE IT.HOWEVER YOU MAY STILL BE ABLE TO GET A LITTLE SPARK TO THE PLUG.

REMEBER IT SHOULD MAKE A GOOD SNAPING SOUND AND A BLUE ARC.,ORANGE ARE REDISH WILL NOT DUE.

HOPE THIS HELPS CONTACT ME IF YOU NEED MORE HELP

ELLIOT NEACE

Feb 19, 2009 | 2000 Yamaha TT 600 R

Not finding what you are looking for?
1992 Suzuki GSX-R 750 WN Logo

Related Topics:

1,396 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...