18 hourse power kraft with oil shooting out the air breather

How does it run? Is it back firing through the air filter box area? And although your stating it is oil is it actually oil or gasoline that is black due to getting dirty? Don't shoot me! I'm going on what information I'm reading what you submitted. If oil is it enough to show up quickly on the dipstick/engine oil level ? Get back to us and we can go further.

Sounds like your valves are sticking, possibly bent w/piston damage.

lol too much oil bud take a little out

sae 30 in winter sae 40 in summer i preffer rotela

If there is a check valve in the breather it may be stuck. However this is usually indicative of broken rings or burned pistons(piston) . Compression bypasses rings and pistons causing excess crankcase pressure and oil spillage.

Most likely yes. It will look like a car oil filter. It looks like a round can that is screwed to the engine.

On my 18 HP, if you are facing the engine and the flywheel is on the left, the adjusting screws are all under the air breather. The best way to get at them is to take the breather mechanism off right down to the carb. They are all on the left side of the carb!

sounds like you have too much oil in the engine (should normally be around 500-600ml when there is too much oil, it gets past the piston rings and pushes it through to the head.

Hello:

Power Kraft is an MTD Product.
You can Contact MTD at 1-800-269-6215 at during the following times: Monday-Friday 8am-5pm and Saturday 11am-3pm EST. (SEASONAL HOURS MAY VARY).
Please, Do Not Hesitate, If you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance.
Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Be Happy. Thanks.

Good Luck

Respectfully

John