Question about 2000 Husqvarna TE 610

Open Question

Husqvarna 610 te model, 2001 year,how much engine oil does it take ?

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: Just wondering what the engine oil capacity is on

abt 1.89 liters.After I fill bikes .I always run it a moment to get the oil around everywhere, but no long enough to get it hot, which will skew the measurement. I let it settle back down for a half an hour.Then check the window again. It's always lower.Then top upto mark.

Posted on Nov 04, 2009

  • 1 Answer

SOURCE: How much to rebuild my Husqvarna TE 610

i just had my top-end redone, valves and timeing chain. on my 1998 model, just the parts were 700.

Posted on Mar 18, 2010

  • 2 Answers

SOURCE: how much oil to put

You don't mention the type of your engine.But to make it easy for you to determine oil capacity, find the dipstick that gauge the oil level and you will see markings inch away from the tip.there is maximum and minimum level mark on it.

Posted on Sep 06, 2010

johndoe541
  • 784 Answers

SOURCE: my clutch is slipping on my 2000 husqvarna te 610

The cluch contro level must have a 0,12 do 0,20 in. idle shifting before beginning to disengange the cluch. to adjust: Loosen the lock nut wath stay after lever on the cluch line. If its loosen operate the adjuster. The slack decreases when unscrewing, and increases when screwing. Take care to tighten properly the lock nut. if its not helping more. change the cluch disc`s.
If you finde that thi info is heling you - please rate my solution.
Thank you and nice ride!

Posted on Mar 19, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the correct forkseal oil amount for a 1982 honda 750 nighthawk


Call the dealer or look up a specific website-Chassis part aftermarket companies generally have this info handy,contact your fork oil company and inquire...

Aug 07, 2014 | All Balls Fork And Dust Seal Kit Husqvarna...

1 Answer

How much oil to put in forks of my 1999 TE 610 Husqvarna?


You don't mention the type of your engine.But to make it easy for you to determine oil capacity, find the dipstick that gauge the oil level and you will see markings inch away from the tip.there is maximum and minimum level mark on it.

Sep 05, 2010 | 2000 Husqvarna TE 610

1 Answer

2000 Husqvarna SM 610 S has excessive engine vibration


Hi, Anonymous and the usual suspects are:
1. Wheels and or tires worn or damaged.
2. Engine/transmission/vehicle not aligned properly.
3. Primary chain is badly worn or links too tight as a result of insufficient lubrication or misalignment.
4. Engine to transmission mounting bolts loose.
5. Upper engine mounting bracket loose.
6. Ignition timing incorrect due to a poorly tuned engine.
7. Internal engine problem flywheels or balancers have shifted.
8. Broken frame.
9. Stabilizer links worn or loose.
10. Rubber mounts loose or worn.
11. Rear fork pivot shaft nuts loose.
12. Front engine mounting bolts loose.
13. Worn out or broken universal joint on shaft drive models.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Husky SM610 Sudden Vibration
http://www.cafehusky.com/threads/610-counterbalancer-vibrations.23472
Husqvarna Motorcycle Parts Fiche Husky Part Numbers
Husqvarna SM 610 Workshop Manual
Husqvarna TE 610E Owner Manual

Jul 01, 2017 | 2001 Husqvarna SM 610 S

1 Answer

Oil pump on the TC 610/99


hi mate the oil pump is located on the left side of the engine and is behind the clutch basket . you need to remove left side case and remove clutch basket and is the second cog from front of engine good luck!

May 15, 2010 | 2000 Husqvarna TE 610

1 Answer

How much to rebuild my Husqvarna TE 610


i just had my top-end redone, valves and timeing chain. on my 1998 model, just the parts were 700.

Jan 10, 2010 | 2000 Husqvarna TE 610

1 Answer

Just wondering what the engine oil capacity is on the te 610


abt 1.89 liters.After I fill bikes .I always run it a moment to get the oil around everywhere, but no long enough to get it hot, which will skew the measurement. I let it settle back down for a half an hour.Then check the window again. It's always lower.Then top upto mark.

Nov 04, 2009 | 2008 Husqvarna TE 610

1 Answer

I need a generator engine casing for husky 610 02 trials any idea secondhand if possible


Google motorcycle salvage husqvarna You can probably find one there.
Can I get a “very helpful” rating on this answer?

Aug 28, 2009 | 2000 Husqvarna TE 610

1 Answer

Oil light wont turn off 2007 TE 610


Your TE610 oil light wont go out.
Make sure you have the proper oil level.
Disconnect the battery for 10 minutes.

Please remember to leave me some Feedback if I've help you! Thankyou.

Jan 24, 2009 | 2007 Husqvarna TE 610

Not finding what you are looking for?
2000 Husqvarna TE 610 Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Experts

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

venugopal durairajan

Level 3 Expert

464 Answers

Are you a Husqvarna Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...