Question about Motorcycles
Usually, if it's a rapid series of clicks, then it's a low battery or a bad connection.
If it gives only a single click each time start button is pressed, this is usually a bad starter relay.
Posted on May 17, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
first ya need to suspend it in the air using a bike jack loosen chain tension on it unbolt the axel and it should come out from the rear of the bike
Posted on Mar 27, 2009
harley recomends that you use their oil but i would be carefull because it is a cynthetic now if you were using regular oil what that will do is clean all the old build up out of the motor this can be bad because after time there are pin hole leaks that occure but the build up stops it from leaking but if you use cynthetic you cant go back to regular oil it will gum up on you and ruen your motor so you got to find out what has been put in it. but use a 10-30
Posted on Jun 05, 2009
Drain the fuel either by siphening or removing the cross over tube at the front of the tank and letting it drain that way or just block off those cross over lines and leave the fule in the tank for removal.
0) remove seat
1) drain fuel
2) undo cross over line (bottom front of gas tank.
3) shut off pet **** and remove fuel line from pet ****.
4)there should only be 2 bolts holding the tank on, one at the top front of the tank and one at the back of the tank.
All in all a pretty easy (but possibloy messy) job.
Posted on Jun 06, 2009
The starter on a late model Harley is a typical Nippondenso gear reduction type starter. They are all basically the same except for size.
To replace the starter clutch inside the starter assembly requires disassembly of the starter assembly.
I you will contact me directly, I will scan the procedure and drawings out of a service manual for you.
Posted on Sep 24, 2009
cant do it the security module is one with the turn signal module i think they can sell you a module to eliminate it alltogether not sure for your year but it will be quite the task and$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ if they do offer it
Posted on Feb 18, 2010
Tips for a great answer:
Aug 11, 2015 | 2002 Harley Davidson FXSTB Night Train
Apr 22, 2014 | 2003 Harley Davidson FXSTB Night Train
Apr 19, 2014 | 2003 Harley Davidson FXSTB Night Train
Apr 03, 2014 | 2006 Harley Davidson FXSTB Night Train
Aug 20, 2013 | 2003 Harley Davidson FXSTB Night Train
May 21, 2012 | 2007 Harley Davidson FXSTB Softail Night...
May 21, 2012 | Harley Davidson Motorcycles
May 18, 2010 | 2003 Harley Davidson FXSTB Night Train
39 people viewed this question
Usually answered in minutes!