Question about Suzuki VS 800 Intruder Motorcycles

Open Question

1995 suzuki intruder 800 tail light works but brake light does not

I bought a new three wire tail light and after installing the running light works but the brake lights do not work

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

robotek
  • 1512 Answers

SOURCE: Exhaust Pipes on 1995 Suzuki Intruder VS

Hi Lcyr. 
Any changes you make to the exhaust system will alter the sound the bike produces. The more you cut baffles,and open up the exhaust, the louder it will get.  What you do alter to a greater extent,is the state of tune of the motorcycle. Any changes to exhaust or inlet plumbing will require a retune of the engine to suit the modifications. This can be subtle to dramatic. Opening up exhausts can often rob low end power where exhaust port scavaging is relient on some back pressure for maximum effect.
 Best to work directly with an engine tuner to do the mods that are known you can get away with, or buy aftermarket prebuilt pipes that have a known previously tested state of tune. Nothing worse than doing something, that then costs money to put back the way it was on finding out it didnt work as well as was hoped.. Hope this has helped you steer your custom mods a little.  I can say with certainty, that I have ventured to do what you are doing many times in the past, and it has always cost me more money in tuning and... and well more parts :)  Cheers
regards robotek

Posted on Jan 20, 2009

  • 1341 Answers

SOURCE: Rear tail light does not turn on.1998 suzuki 1500 intruder

It mught be the bulb that needs replacing or else check the wiring to the bulb for continuity in case there is a broken or snapped bit.If you have a voltmeter then you can test the voltage reading at the point of contact..Sometimes rust builds up and a simple cleaning would solve this.Hope this helps.

Posted on Feb 16, 2010

  • 653 Answers

SOURCE: suzuki intruder vs800gl Light problems

Have you check all the bulbs condition? Check your fuses and the blinker coil.

Posted on Mar 24, 2010

  • 72 Answers

SOURCE: I replaced brake/tail light bulb but only the

First, it sounds simple, but do you have the correct bulb with two filaments? Otherwise you should look for a loose wire, or corroded lead.

Posted on Mar 24, 2010

  • 440 Answers

SOURCE: Rear tail lights and running lights not working.

Make sure that the rear light fuse is not blown
If not trace the brown wire from the rear lights & check for continuity between lamp holder & fuse
As its both rear lights & front sidelights it will not be an earth fault

Hope this helps (if so please mark as very helpful)

Ride Safe
Bike-Doc

Posted on Apr 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Are there any other fuzes on a2002 1500 suzuki intruder then the 30amp main if so where are they


Hi, Joseph tail light issues are relatively easy to diagnose and repair always check the tail light fuse first and make sure you have power on both sides of the fuse holder and the usual suspects are:
1. Tail light bulb element is broken.
2. Tail light bulb soldered contacts are extremely worn down.
3. Tail light bulb socket corroded.
4. Tail light bulb socket has no power and or ground.
5. Tail light wiring harness damaged from the rear tire.
6. Tail light rear fender wiring harness connector faulty due to corroded, broken, or loose pins/sockets.
For more information about your issue and valuable "FREE" downloads that you need please click on the links below. Good luck and have a nice day.
2002 1500 suzuki intruder fuse panel location Google Search
Fuse Box location
Fuses In Suzuki Intruder 1500 Lc
http://service.tanga-moteurs.ro/data/Suzuki_VL1500_Intruder_98_00_Service_Manual_BY_DEN.pdf

Apr 14, 2016 | 2002 Suzuki VL 1500 Intruder LC

1 Answer

How do I install Krator turn signals on my 1998 Suzuki intruder 800?


Not sure how to answer that. You unbolt the old ones and bolt in the new ones.

Mar 02, 2016 | 1998 Suzuki VS 800 Intruder

1 Answer

Can i see a blue print for a 1995 suzuki intruder 800


Not sure what you mean by blueprint, but you can see exploded line drawings of the various components here:

http://www.bikebandit.com/1995-suzuki-vs800gl-intruder/o/m139250

Apr 06, 2014 | 1995 Suzuki VS 800 Intruder

1 Answer

My tail/brake light is not working on my 1999 intruder. They were working fine last week but not now. when I turn the key to the rear "P" position, the brake light only works, not the tail light.


p park position should only light the tail light, so my guess is there is one filament of the stop tail bulb shorting to the other filament inside the bulb, try a new bulb

Apr 04, 2011 | 2000 Suzuki VL 1500 Intruder LC

1 Answer

I replaced brake/tail light bulb but only the brake light comes on,no tail light for 2002 suzuki marauder 800


First, it sounds simple, but do you have the correct bulb with two filaments? Otherwise you should look for a loose wire, or corroded lead.

Mar 24, 2010 | 2002 Suzuki VZ 800 Marauder

1 Answer

Rear tail light does not turn on.1998 suzuki 1500 intruder


It mught be the bulb that needs replacing or else check the wiring to the bulb for continuity in case there is a broken or snapped bit.If you have a voltmeter then you can test the voltage reading at the point of contact..Sometimes rust builds up and a simple cleaning would solve this.Hope this helps.

Feb 16, 2010 | 2002 Suzuki VL 1500 Intruder LC

1 Answer

Have 96 suzuki intruder 800. Has been sitting for three years, the carbs were lacquered pretty bad, especially the back carb. cleaned them both. bike runs, but the back carb/cylinder acting rough.what...


I would try checking the rubber between the carb and motor for air leaks,and/or spray carb cleaner through while running with the air box open.
Hope this helps.

Oct 06, 2009 | 1995 Suzuki VS 800 Intruder

1 Answer

Installing a back off


Usually the brake light has a single power lead and then it earths at the other side.

Jun 25, 2009 | 2002 Suzuki VS 800 Intruder

1 Answer

Put new handle bars on and then after hooking everything back up the signal lights and also tail lights will not work??


Sounds like you have a blown fuse. Check the fuses. Chances are that when installing the new bars a hot wire got pinched or abraded and has grounded causing a blown fuse. If a new fuse blows right away, that would be the cause. Other things that would cause the lack of lights would be wires hooked up incorrectly, a wire not hooked up at all, a broken wire or a loose or dirty connection. If the new fuse blows you will need to find the problem. If the wires run inside the handlebars the entry and exit points for the wires are likely areas for abrasion and pinched wires.

A “very helpful” rating for this answer? Thanks!

Jun 13, 2009 | 2004 Suzuki VS 800 Intruder

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...