Question about 2005 Honda CRF 50 F

1 Answer

Can a 2004 honda crf 50cc get spark with out a ICM?

Have honda 50 cc crf with out ICM can it be wired without it to. Get spark and run

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Honda Master
  • 40,013 Answers

Hi, Anonymous I don't think so and the true answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
https://crfsonly.com/forum/viewtopic.php?t=36689
03 crf450 diagnsis stator stator replaced still no spark
Honda CRF50F 2004 2015 Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda CRF50F 2004 Owner Manual

Posted on Aug 03, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 29 Answers

SOURCE: 2004 honda crf 150 and all of the hoses are off of carb.?

Not positive but on two stroke bikes all but one of your hoses are breather and over flow hoses and are smaller than the fuel line that should come from the front left of the carb and go up to the fuel tank. the rest should come from the carb and have holders attached to the carb feed the line closest to the holder and fit it on the breather hole coming from the carb pertruding outward from the carb. there should be three or four lines and one fuel line.

Posted on Jan 30, 2009

  • 5 Answers

SOURCE: 2004 honda crf 150 wont start

how menney miles has it dun???check compreshon on bores.shoud be 110+psi 4 good running.

Posted on Apr 21, 2009

netrakid250
  • 52 Answers

SOURCE: 2004 honda crf 230 f

http://justkdx.dirtrider.net/floatlevel.html

i could write a long thing on here but you should just go here it will tell you every thing

Posted on Jun 06, 2009

  • 1509 Answers

SOURCE: How do you remove the front tire from a Honda crf

The axel has a nut on one end and two bolts or one pinching the shaft on the other. Jack the wheel off the grond unscrew the nut loosen the pinch blots pull out the axel and the wheel falls out Watch wher the spacers go as they have to go back turned the right way. the brake rotor has to be lined up with the caliper to put it back in as you don't push the brake with the wheel off as the pads will have tobe pried open to get the rotor back in. Tring to fix a flat? same as a bicycle except use soapy water don't forget to use water to cheak for leaks then put on the powder on the tube before it all goes back good tire irons come from bike dealers and bike parts suppliers. Screw drivers cause more troble than thier worth. Road going bikes chage the tube patches are Illegal DOT

Posted on Aug 15, 2009

czaa
  • 4514 Answers

SOURCE: 1964 honda C100 cub 50cc step through not starting

make sure gas is coming from the tank fawcett then thru the line to the float---chec if choke is workin-or try holding something over carb throat to create suction a book by johns and edmonson explains carbs well and other repair

Posted on Mar 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 chevy impala start car runs about10 minutes then stalls new fuel pump when stalls cut out like running out of gas then don't start till cools off if electical to me would cut out instantly help


Not if ignition module . Electronic componets when heated up will act just like that . When it dies check spark, fuel pressure right away an find out what quit . Test don't guess . Videos on youtube on testing GM ignition system. Which engine does yours have ? Had option of two different ones . 3.4 an 3.8L . Ignition module or cranhshaft position sensor could be the cause .
Three dual tower ignition coils are mounted to the ICM, and are serviced individually. The ICM performs the following functions:
• The ICM supplies a power and low reference circuit to the CMP and CKP sensors.
• The ICM determines the correct direction of the crankshaft rotation, and cuts spark and fuel delivery to prevent damage from backfiring if reverse rotation is detected.
• The ICM determines the correct coil triggering sequence, based on how many 18 X ON-OFF pulses occur during a sync pulse. This coil sequencing occurs at start-up, and is remembered by the ICM. After the engine is running, the ICM will continue to trigger the coils without the CKP sync pulse.
• The ICM inputs 18 X and 3 X reference signals to the PCM.
• The 3 X reference signal is also known as the low resolution engine speed signal. This signal is generated by the ICM using an internal divide-by-six circuit. This circuit divides the 18 X signal pulses by 6. This divider circuit will not begin operation without a sync pulse present at start-up, and without 18 X and 3 X reference signals no fuel injection will occur.

Pull plug wires off same coil when it dies , crank the engine , is there spark ? Ignition Control Modules ICM by Wells featuring Sgt Tech

Nov 12, 2016 | 2004 Chevrolet Impala

1 Answer

2003 Crf 450r ICM CONNECTOR wiring schematic


Hi, Barry for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Honda, despair not, for a mere $8 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
CRF450R service manual repair 2002 2004 CRF450 Download Manuals Technical
http://www.partsfish.com/page/oem-parts-for-honda
Honda CRF450R Owner Manual
Honda CRF 450 R2 R3 02 03

Aug 07, 2016 | Motorcycles

2 Answers

No spark in my CRF 250 2004 Honda


Change ur spark plug if doent work then it will be the chance of spark coil fail

Apr 06, 2014 | 2004 Honda CRF 250 X

1 Answer

Gear oil for 2004 honda crf 100


Fuel and ignition Sparks per cylinder: Fuel supply system: Carburetor Ignition type: Digital CDI Funnel diameter: 0.87 inch Compression: Engine mounting: Transverse Lubrication system: Wet sump Gear box: Manual 5-speed Clutch: Wet, multiple discs, cable operated Final drive: Chain Spark plug pipe type: NGK, CR7HSA Motor oil: Synthetic, 10W/40 Starter: Kick-starter

Jan 11, 2014 | 2004 Honda CRF 100 F

1 Answer

Seized honda crf 70


Hi, Garret for more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
CRF 50 Kick start won budge
Unsticking Stuck Engines
CRF70F service manual repair 2004 2012 CRF70 Download Manuals Technical $8 very cheap
http://www.partsfish.com/page/oem-parts-for-honda
Honda CRF70F 2004 Owner Manual

Apr 17, 2013 | 2006 Honda CRF 70 F

1 Answer

Why does me honda 230 crf only start by pushing it


Dirty contacts in starter button or loose wire.

Dec 30, 2012 | 2004 Honda CRF 230 F

1 Answer

Not getting spark at the spark plug on a 04 crf 70


Start with new plug ., then work your way to stator ., so plug., plug wire ,.coil.,, cdi ., stator.,., easy to test all them and chase your faulty part

Dec 05, 2012 | 2004 Honda CRF 100 F

1 Answer

Type of oil and spark plugs for ctf 150


Just use standard motorcycle oil 10W40 do not use semi or full synthetic as it will not give you any benefits. For spark plug just use factory standard which you can see on the spark plug's neck.
Good enough?

Jun 15, 2010 | 2004 Honda CRF 150 F

1 Answer

How do i set the timing on 50cc birtbike


what is the brand and model of your bike? you selected crf100, you were referring to a 50cc bike.

Sep 16, 2009 | 2004 Honda CRF 100 F

1 Answer

2004 honda crf 150 wont start


how menney miles has it dun???check compreshon on bores.shoud be 110+psi 4 good running.

Apr 20, 2009 | 2004 Honda CRF 150 F

Not finding what you are looking for?
2005 Honda CRF 50 F Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...