Question about Honda Motorcycles

1 Answer

1982 Honda XR 100 main jet size - Honda Motorcycles

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Honda Master
  • 39,973 Answers

Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere $10 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing and printing please click on the blue links below. Good luck and have a wonderful day.
http://www.cmraracing.com/showthread.php?24891-1984-XR100-stock-carb-settings
02 xr 100 jetting
XR80R XR100R 1985 1997 Workshop Repair Manual Download Manuals Technical $10
http://www.partsfish.com/page/oem-parts-for-honda
Honda XR100R 1996 Owner Manual

Posted on Aug 03, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 74 Answers

SOURCE: main jet sizes

The sizes are stamped on the Jet it self. For the Honda Shadow it is a 185. Not sure for the steed.

Posted on Jan 13, 2009

  • 115 Answers

SOURCE: 2000 Honda CR125 stock jet.

Here is a website to for different jets for the carb.
http://www.bikebandit.com/houseofmotorcycles/honda-motorcycle-cr125r-2000/o/m2176

Pull out the jet and it should have a number on it.

Now you can use this site to determine which jet you need.

http://www.keihin-us.com/list.htm

This page will help you determine which jet you need for your area.

http://www.4strokes.com/tech/howtojet.asp

I hope this helps

Posted on Aug 08, 2009

  • 66 Answers

SOURCE: main jet and needle setting for 2003 honda cr250 at 5000 ft elev.

this should get you close, will still have to fine tune due to exacting conditions.....humidity, temperature, pipe, silencer and reeds....however try this:

Main 360
Pilot 20
Needle H1-70
Needle Top Clip
Air Screw 2 Out



Posted on Oct 08, 2009

czaa
  • 4514 Answers

SOURCE: I have a 72 cb

welcome to the ol'scool school--secure a clymer or other shop manual-mechs cant burn rubber without books

Posted on Sep 23, 2010

  • 1 Answer

SOURCE: My Honda X4 idled lumpy

108s and 115s are the stock sizes. The 115s are on the outside cylinders

Posted on Jun 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you adjust the timing on a 1982 honda xr100


get a chiltons repair manual this will give you step by step instructions

Aug 16, 2014 | Honda Xr100 Xr 100 Complete Clutch System,...

1 Answer

Xr250 Carburator running too rich


Take the bottom of your carb off and remove the main jet--the biggest one. Notice the number on it and write it down. Go to a Honda dealer and get another main jet of the same number minus 10. Example; 140 present jet, new jet; 130.

Oct 09, 2013 | 2004 Honda XR 250 R

1 Answer

Need to rejet 1999 xr250r for sea level


You will need to go down in # jet sizes on both the pilot jet ( low end ) and the main jet ( top end ) since the air is thinner at higher altitude you will need create more air than fuel. For example if you had a 340 main jet you would go with a 320 or a 325. and the pilot jet would also go to a lower #.

Jul 01, 2011 | 1999 Honda XR 250 R

1 Answer

Hi My XR 600 - 97, was taken off the road last May 2010 -I have purchased it in Dec 2010, and have slowly been restoring it. However yesterday when i took it for a spin, it was not reving smothly,...


Black smoke indicates a too rich fuel mixture. Be sure the air cleaner is clean. Install a new spark plug. Check what size the main jet is. The prior owner may have installed a larger than stock main jet. There will be a number stamped on the side of the jet. Call the dealer and ask what the stock jet number is for your bike and then tell them what you have. Go back to stock.

Mar 18, 2011 | 1995 Honda XR 600 R

1 Answer

What,s the reason for my honda crf 100 sparkplug getting so dirty all the time i need to keep cleaning it to get it to fire everytime can anyone assist on this problem please help????????????????


The bike may have the wrong spark plug in it. The stock plug is NGK, CR7HSA. You may want to go to a hotter plug > CR6HSA. It is also possible that a prior owner installed a bigger main jet. Check the main jet size. The jet will have a number stamped on one side. Stock is #92. A #98 jet would be a richer jet. Please rate my answer. Thanks.

45a6947.gif

Sep 13, 2010 | 2005 Honda CRF 100 F

1 Answer

Carby


Remove carb. Remove fuel bowl to access jets. Low speed jet is separate off to one side. Main jet is in center and threads into emulsion tube which has metering needle down its center. Unscrew main jet from emulsion tube and replace with bigger or smaller (depending on your desires).

Jun 04, 2009 | 2000 Honda XR 250 R

2 Answers

XR 100 didnt move for a year.My bad so i cleaned the carb,jets,floats,needle slide. Motor cycle starts on the 1st kick with choke on full idles fine.When you touch the throtle or click the choke to middle...


First Make sure you have all new fresh gas,and new fuel filter,Then check the intake tube between the head and carb for cracks or leaks,And You'll need to go back through the carb again as this is a carb issue,But without doing the above first,a clean carb won't be clean for long.

May 17, 2009 | 2000 Honda XR 250 R

1 Answer

Main jet sizes


The sizes are stamped on the Jet it self. For the Honda Shadow it is a 185. Not sure for the steed.

Jan 12, 2009 | 1990 Honda VT 600 C Shadow

1 Answer

2001 xr 650 r uncorked with yosi can . 165 main 65s 2 clip pops some when backing off not crisp right off bottom help please arkansas


try backing the fuel screw on the bottom of the carb out to about three turns out from lightly seated.if this doesnt help or you see no change bump your pilot jet up probally about one to two sizes

Dec 23, 2008 | 2003 Honda XR 650 R

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...