Rhino will not start turns over but wont start?

Sounds like you losing power in run position. Check ignition switch to be sure power is staying on in run position.

Check your start button for sticking if it is still running. If not, pull the starter and try it while out of the rhino and see if it works correctly. Make sure your bolts are torqued correctly.

It takes fuel, spark and compression to run. Check compression to verify within spec..

With any system you squeeze the soft water pipes coming from the Rad as you fill it.. Keep sneezing over and over unto it's full.

gasoline..I have had people bring in numerous atv's/motorcycles with empty tanks...(swearing they have gas!!)..next is to make sure you are getting gas to the spark plug (NEW ONE) and gas is getting to the fuel system.

Idles FINE but stalls when pedal is pressed - Yamaha Rhino Forum ...

www.rhinoforums.net > ... > Technical > Engine
Feb 6, 2012 - 9 posts - ‎5 authors it starts fine but stalls when I press the gas pedal. what do I need to check now. Sponsored Links. RhinoForums.net is the premier Yamaha Rhino UTV/ATV Forum on the internet. Registered ... Does it seem to Idle smoothly and does it start right back up after it dies? Does it .... astro push accelerator and dies.

sounds like the decompressor has broken

It could be your battery not being fully charged or possibly dirty fuel.

the float valve maybe stuck and not letting fuel into the bowl