Question about 2003 Harley Davidson FXDL Dyna Low Rider

1 Answer

How to remove rear fender on 2004 FXDL - 2003 Harley Davidson FXDL Dyna Low Rider

Posted by Anonymous on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.

  • Harley Davidson Master
  • 44,675 Answers

Hi Anonymous, start by removing the seat and disconnecting the battery ground cable, then disconect the the tail lite and turn signal harness at the connector blocks. note you may have to remove some wires out of the blocks, to facilitate fender removal, by depressing the tangs with a small screw driver and a razor blade to pull them back for installation. Turn signal wires will be one of these. Remove fender strut covers, turn signal assemblies will remain on covers. There is a bolt on the inside of the fender up front in the middle also a couple on the sides that go through the struts. Depending on your patience, small hands, skinny fingers, and 1/4 drive flex sockets and extention collection you might be able to perform this delicate operation with out removing the rear wheel, otherwise by blocking up the bike with wood so rear wheel is about 6" off the ground you can remove the lower shock bolts and let the swing arm and wheel gently down to gain easier access to the inside of the fender bolts.Be patient, be carefull, and use common sence is case I forgot something. Good luck

Posted on Apr 18, 2015


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 8 Answers

SOURCE: want to lower a 2004 fxdl from the stock 12 inch ,

I don't think it will. I have a 2002 FXDWG and 1 inch shorter than stock shocks and plenty of clearance.

Posted on Mar 31, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What order does a rear tire go back on a 2000 dyna low rider

Slip the tire into place under the rear fender. Move it ahead and install the drive belt on the sprocket. Move the tire backwards and

Sep 04, 2014 | 2004 Harley Davidson FXDL - FXDLI Dyna Low...

1 Answer

Remove rear fender harley fxdl 2003

Hi Anonymous, I'm sorry you can't find the very first and best tool you ever bought for your Harley Davidson. Despair not, for a mere $6.50 you may be able to download another one from the website below and good luck. Harley Davidson Manuals Mark Workshop

Jan 19, 2014 | 2003 Harley Davidson FXDL Dyna Low Rider

1 Answer

How do I remove the rear fender on my 2002 harley dyna low rider fxdl

Hi Anonymous, for more information on your question please visit the websites below and good luck:
Harley Davidson Manuals Mark Workshop

Dec 10, 2013 | Harley Davidson FXDL Dyna Low Rider...

1 Answer

Swap fxdl rear fender to fxdwg fender?

Hi Anonymous, 4 out of 5 Harley Gods give this one a thumbs up, but just to be on the safe side contact your local dealers service/parts department for confirmation. Good luck and have nice day.

Mar 24, 2013 | 2005 Harley Davidson FXDL - FXDLI Dyna Low...

1 Answer

How do remove the seat? I've removed the bolt attached to the rear fender. The book says to pull the seat back to release the hook from the frame? The seat doesn't want to pull back toward the rear.

If you have a sissy bar on the bike, you'll have to lift the rear of the seat a bit to get the clearance necessary for the seat to slide to the rear. If that doesn't work, take the sissy bar off by removing the two small bolts on either side of the sissy bar side plates. With the sissy bar off, the seat should come off easily.

Good Luck

Nov 28, 2010 | 2005 Harley Davidson FXDL - FXDLI Dyna Low...

2 Answers

My rear tire is off center to the left on my 2003 fxdl is this normal? not wobble and it rides ok

Check to be sure that the rear belt is running straight, (sight along the top or bottom of the belt from rear to front). If the belt is running true, the appearance of the wheel being off center (from the rear) is probably normal. the fender is closer to the tire on one side of the bike than on the other on most Harleys.

Oct 30, 2010 | 2003 Harley Davidson FXDL Dyna Low Rider

1 Answer

If I was to Chop my rear fender where would be a good place, or intall one already done so what size fender would that be and would a strutless fender work

Seek advice from the people in the know .There are many places to get help and advice ,If in doubt ask a proffessonal chop shop .They will tell you whats works and what does'nt .You will save money trust me .

Mar 12, 2010 | 2004 Harley Davidson FXDL - FXDLI Dyna Low...

Not finding what you are looking for?
2003 Harley Davidson FXDL Dyna Low Rider Logo

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers


Level 3 Expert

4340 Answers


Level 3 Expert

77169 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides