Question about Yamaha V Star 1100 Classic Motorcycles
Friend has a 2004 yamaha 1100 classic...when he fills tank gas will spray out top of filler tube...he replaced cap thinking gasket was bad....still same problem..where is vent line to tank to check for kinks ?
Posted by Anonymous on
Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your problem. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
yamaha star 1100 Where are the gas tank breather lines Google Search
Gas Cap Vent 05 1100 Custom
OEM parts for Yamaha
Posted on Apr 27, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: fuel drain tube...i think
I have 08 1100 vstar, haven"t road in a month or so, but have regulary started to keep baterry charged. i took it out yesterday to ride, hard to start, acted like it running on one cyl. strong smell of unburned fuel from exhaust. ????????
Posted on Dec 14, 2008
do you mean remove the wheel? tires are best left to a shop to do as they have the machine. drive shaft yes? undo all bolts thru frame to final drive casing. slacken wheel nut but do not remove spindle, pull wheel back and out of the frame the drive shaft comes with it, tace out spindle and now lift final drive from wheel, there may be a spacer which might fall out. done deal..
Posted on Mar 21, 2009
You are probably not going to find assembly instructions. If you can't find all the parts or screws then get another cap. Google " motorcycle salvage yamaha " and you can probably find one at a much lower cost than the dealer would give. By the way, forget any loose screws in the gas tank. The stuff can not get past the fuel valve and filter and are not going to hurt anything.
Please rate this answer. Thanks!
Posted on May 02, 2009
Lift the back of the tank up and prop it up. Remove the chrome beauty covers, find spark plug wires and remove. Blow out with air first. Chaz Moto DC
Posted on Jan 22, 2010
Testimonial: "appreciate the fast answer!"
1) Make sure your fuel petcock is closed, then detach the gas line coming off it (left underside of tank)
2) Remove the back seat (single acorn nut on rear fender)
3) Remove the front seat (two allen bolts at the back of seat)
4) There are two metric 12mm bolts under the front seat that hold the tank down. Remove them. The tank should be sitting loose on bike, but connected by some wires
5) Disconnect the white wiring harness under the bike. Tank is now totally free to remove.
6) Pull tank up and back at the same time, it will slide off the two rubber mounts at the front.
Posted on Mar 26, 2010
Tips for a great answer:
Jun 30, 2014 | 2006 Yamaha V Star 1100 Custom
May 13, 2014 | 2004 Yamaha V Star 1100 Classic
May 13, 2014 | Yamaha V Star 1100 Classic Motorcycles
Apr 07, 2014 | Yamaha V Star 1100 Silverado Motorcycles
Nov 08, 2013 | 2004 Yamaha V Star 1100 Classic
Oct 14, 2013 | 2004 Yamaha V Star 1100 Classic
Nov 07, 2012 | 2002 Yamaha V Star 1100 Classic
Apr 04, 2012 | 2000 Yamaha V Star 1100 Classic
Mar 15, 2011 | 2004 Mercury Sable
31 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: