Question about 2003 kawasaki KX 125

1 Answer

My rm 125 was running good for 45 min then it bogged out and now wont start, seems like it ran out of gas or fouled a plug. i clean the plug it starts for a second then bogs out and wont start again

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Clean your carburator, and if possible do a compression check, how longs it been since you replaced rings and piston.

Posted on Jun 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What number plug should I be running in my 2002 125 rm suzuki


I would use a NGK Platinum Plug (R6918B-8 or BR8EIX/BR9EIX) and try to cut back a little on the oil mixture to gas ratio or adjust the gap a little hotter.

Sep 27, 2015 | Suzuki RM 125 Motorcycles

1 Answer

2001 rm 250 boggs and dies when it warms up


Hi, Anonymous and the usual suspects are:
1. Faulty ignition coil.
2. Faulty spark plug cables.
3. Faulty temperature sensor.
4. HISS light not going off.
5. Faulty starter motor.
6. Valves adjusted too tight.
7. Spark plug gap too wide.
8. Fuel has vapor lock.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2002 yz250 idles fine but bogs and tries to die when twisting the throttle...
2000 RM 125 Bike wont stay running
Suzuki RM250 Owner Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Dec 23, 2017 | 2003 Suzuki RM 250

1 Answer

My 2003 Suzuki rm 125 kick starts with brand new spark plug then eventually bogs down and dies, does the same when push started, does it need new piston and rings?


HI,,sounds like your plug is fouling,,what pre-mix ratio are you running? and has the carb been played with? run 32-1 premix and remove and clean the carb.

piston and rings are not to blame for this behaviour.

Mar 23, 2011 | 2003 Suzuki RM 125

1 Answer

I was ridding my 84 Yamaha yz125 and it was running fine then it quite like it ran out of gas. I took the carb apart blew it out. Checked the fuel lines, it has fuel in the tank (clean). When I went to...


Sounds like it could be as simple as a fouled plug. Change the spark plug and try it again. Lugging a 125 around fouls plugs really easily, you have to open it up and clean it out occasionally.

Jul 24, 2010 | 2003 Yamaha YZ 125

1 Answer

Hi i got a rm 125 06 the bike starts and rans but it wont power band at all wat could it be


First check the exhaust and air box are in good condition no holes or cracks ,as either will ruin the fuel mixture especially on a 2 stroke . all so try a new plug as this can foul up and is a cheap starting point. Put fresh fuel in and drain carb if req. Also check air filter is clean and set fuel mixture properly,cleaning the carb or injection nosel may help. If a power valve is fitted check it is moving ,remove valve cover and exhaust at the barrel then pull the cable the valve must compleatly expose the exhaust port at fully open. Finally if this does not work the piston or bore may be worn very common on 2 strokes ,look down the exhaust port and look for scores down the barrel.and replace if worn.

Feb 12, 2010 | 2005 Suzuki RM 125

1 Answer

Have a 1992 suzuki 125 rm bike cant get it to


try changing gas . dont forget to empty out carb bowl also check for spark might have a fouled spark plug .

Jan 03, 2010 | Suzuki RM 125 Motorcycles

1 Answer

My suzuki rm 125 ran great, i turned it off for the night and the next day it would'nt get any spark. any ideas?


moisture in your coil???...if you are electrically minded you will be able to check the ignition system out. But then again it may just be your plug check it isn't fouling...

good luck

Nov 11, 2009 | 2003 Suzuki RM 125

1 Answer

2003 suzuki rm 85 wont start cleaned carburetor,


if it has reed valves, check them for either cracked or broken pedals. also try starting it with the air filter removed. also make sure the choke is operating properly

Oct 22, 2009 | 2003 Suzuki RM 125

1 Answer

Bike bogged down like plug fouled now wont start


Based on the information given, I think you may have a hole in the top of the piston. It sounds like pre-ignition, ( AKA detonation and engine knock ). Pull the cylinder head and check the piston and cylinder head. Sometimes the top outer edge of the piston disintegrates due to the heat. Replace the piston and rings and remove the carbon from the head. Be sure you run 32/1 mix on gas and oil. That's 4oz two stroke oil per gallon of gas. Only use premium gas.

Remove and clean the carb. Be sure the carb mount bolts and carb manifold bolts are tight. An air leak will cause the engine to run hot.

Please rate this solution. Thanks

Apr 06, 2009 | 2003 Honda CR 125 R

2 Answers

2003 Suzuki RM 125 with no power band.


Scatter gun approach > thoughts to check out > > >
Clean and dry the air filter? Go back to a stock main jet, at least to check things out? Are "O" ring seals on the main jet going bad?Partial internal collapse in exhaust (remove exhaust pipe & do a quick run down the alley), Install a new stock NGK spark plug, Be sure battery connections are clean and tight, Be sure intake manifold and carb are good and tight.

Hope this helps!

Apr 03, 2009 | 2003 Suzuki RM 125

Not finding what you are looking for?
2003 kawasaki KX 125 Logo

Related Topics:

319 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5057 Answers

Marvin
Marvin

Level 3 Expert

81400 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...