Question about 2004 Bajaj Caliber 115

1 Answer

Fast idle speed

Engine rpm and idle speed not getting setted

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Bajaj Master
  • 1,190 Answers

Have you cleaned the carb and the fuel tank ? if not do so and problem should go !

Posted on May 13, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Fast idle problem 1999 Isuzu Roseo


Code for high idle is different,are you sure was 245?could be 225

Jul 05, 2016 | 1999 Isuzu Rodeo

2 Answers

What is causing the fast Idle and slowing down


well gee, there are 50 reasons.
did you scan the PCM yet, if not ,why not?
when the idle surges, that means.
NO RPM ranges stated, if super low rpm check EGR.

1: engine lean and ISC dead, or cant handle the huge engine power drop..The PCM can even make this worse!, buy hunting the ISC to find spec, idle and failing... to...
2: or any of 50 other things causing huge engine power drop and PCM can't maintain idle controls.
super lean burn.(bogging)
super rich burn, misfire for 50 reasons.

i cant hear your engine,nor feel it, or see it shake from gross misfiring.
no can i drive it and see/feel power loss,
can I?
asking net bunny's this (blind as bats)
is "OVER THE TOP" no?
so here , ill toss the dice for you
and guess gross misfiring.
ever get a tuneup this decade, if not bingo , no?

and the others...

http://jeepdied.com/Misfire101.html

link even has the 50 cause list, to show the futility of guessing!
we do 1 to 10 tests. and find it.
for sure.

as you can see EFI systems are complex.
gue$$ is not only expensive but can net you 2 problems easy.

Feb 05, 2016 | 2002 Jeep Grand Cherokee

1 Answer

Tickover 1500 rpm when warm


idles too fast.
what engine?
what year?

on a gas engine, the idle speed is 100% controlled by PCM at all times. hot.
so its out of control that means the PCM closes the ISC valve.
and RPM will not drop. (its stuck open) or vacuum air leaks
jeeps use speed density EFI system using the MAP sensor.
this means all air leaks on jeeps , cause wild fast idle speeds.
that is all you need to know , to find problem (find leaks)

clean the ISC yet (idle speed control) valve.?

Mar 28, 2015 | Jeep Grand Cherokee Cars & Trucks

1 Answer

I have a 1986 GMC 1500 with a 5.0 and stock rochester carb. The truck will start but you must keep gassing it as it won't idle. It kicks off every time. Any suggestions on how to fix this cold natured


fast idle speed screw, works off the fast idle cam which the choke adjustment sets, it works together by linkages. This is the raised idle speed setting you need to keep a cold engine running. First you set the idle speed by the idle speed screw with engine at normal operating temperature. Then you set the linkage up so the cam is on a raised step, throttle will be held on that raised step. then you can turn the idle speed screw to get idle at about 1500-1800 rpm. Now when you start engine cold, choke will set the fast idle cam on that raised step- when engine starts and runs it should be running at your fast idle setting. That's how it supposed to work, you just have to get everything adjusted right. I hate carburetors, they never stay adjusted right. Considering their complexity and small mechanical parts, no wonder.

Dec 24, 2013 | 1986 GMC C1500

1 Answer

What should the idle speed be set at on a 1989 jeep wrangler 4.2 liter straight 6 cyl. It has a 2bbl carb. It idles at 1000 rpm right now but seems fast or is that about right?


Most carb. engines should idle between 725 and 750 R.P.M., lower the idle and be sure to check the timing. You should have an emissions label under the hood to explain the idle and timing.

Aug 16, 2011 | 1989 Jeep Wrangler

1 Answer

When I first start my 99 electra glide classic, it idles at about 1k. If I then blip the throttle, the idle drops to about 400 rpm. It remains there until I ride for about 20 minutes. Then it stays at...


If your bike is fuel injected, this is typical. What is happening is the fast idle is keeping your engine running until you blip the trottle. When you do this, the fast idle relaeses the idle speed control. Once the engine gets to full operating temp, the idle speed is correct.

Good Luck
Steve

Oct 26, 2010 | 2001 Harley Davidson FLHTCUI Electra Glide...

1 Answer

High geared chainsaw


Hi 1tgriffin,
My name is Dennis and I hope that will serve your needs.
IDLE ADJUSTMENTS:
There are three adjustment screws on the carburetor labeled
H (for High speed MIXTURE)
L (for low speed MIXTURE)
T (for idle SPEED SETTING)
They are located just above the primer bulb. If your saw floods so soon in the starting process the idle mixture setting can be set too rich and the speed may be set too slow. Remember the chain will not move when the idle speed is set correctly with a WARM ENGINE!
Adjust the idle speed to just below chain movement WITH A WARM ENGINE this is just below the activation RPM of the centrifugal clutch. Let the engine run at a higher speed than idle until it is warm -- 3 min -- you may have to keep goosing it until then.
Please don't exceed the limits of the plastic limiters when making adjustments.
If you haven't adjusted the mixture screws you may just have to adjust the idle speed and that can start my turning that screw all the way in to the stop and then back out 4-1/2 turns for a good place to start. FAST IDLE -- Adjust the speed until the engine runs with out the chain moving. Adjust clockwise to increase speed. C clockwise to decrease engine speed.
Accelerate the engine and if it stumbles and makes too much smoke it's too rich turn the
LOW SPEED MIXTURE (in) clockwise in 1/16 a turn increments NO MORE at a time because a two cycle needs to run at a setting for a short time to really prove the setting. don’t run it wide open to warm it up but it should be at a fast idle. Nothing you do will be proven correct until the engine is warm.
Good Luck
Glad to be of assistance - please rate the solution because I will learn from your rating. Thank you

Sep 02, 2008 | Poulan Garden

Not finding what you are looking for?
2004 Bajaj Caliber 115 Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bajaj Experts

sachin sharma
sachin sharma

Level 2 Expert

171 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Are you a Bajaj Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...