Question about 2008 Harley Davidson FXD Dyna Super Glide
What are the torque specs for the rocker arm bolts
Posted by Anonymous on
ROCKER ARM SUPPORT PLATE
Installing the rocker arms and rotating the engine with the valve
train loaded can result in bent push rods, damaged bushings
or a warped support plate.
To install the rocker arm support plate, both lifters of the
cylinder being serviced must be on the base circle (or
lowest position) of the cam.
Place the rocker arm support plate assembly into the rocker housing. Loosely install the four
rocker arm support plate bolts with flat washers.
Tighten the rocker arm support plate bolts in a cross pattern and alternately tighten
each of the four rocker arm support plate bolts just 1/4 turn. THEN continue turning the bolts in these increments until snug. THEN following the same sequence, tighten the bolts to 18-
22 ft-lbs (24.4-29.8 Nm).
THEN install and alternately tighten the two bolts to secure breather assembly to 90-120 in-lbs (10.2-13.6 Nm).
Posted on Oct 14, 2014
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: brake caliper torque specs
I'd put a drop of Loctite 242 (med. strenght blue) on the threads of each bolt and torque them to 25 foot pounds.
Posted on Oct 24, 2009
Testimonial: "the loctite is something I use always anyways, I was just wondering what to torque em to...thanks!!"
5/16" bolt - 15-18 foot pounds
1/4" bolts - 10-13 foot pounds
Upper rocker cover bolts - 10-13 foot pounds.
Posted on Jun 12, 2010
Testimonial: "Very helpful and Quick---------Thankyou !"
SOURCE: just need to know how
I assume you're working on an Evolution or a Twin Cam and you're talking about the torque specs on the lower plate.
5/16" bolts 15-18 foot pounds
1/4" bolts 10-13 foot pounds
Hope this helps
Posted on Sep 05, 2010
Torque values for the cylinders and rocker box on a 1979 XLH 1000 Ironhead Sportster are as follows.
Cylinder base torque - 25-35 foot pounds.
Cylinder head torque - 55 -65 foot pounds
Rocker box torque - 14 -19 foot pounds
If your bike is NOT the bike listed above, repost and tell me the year model of your bike.
Posted on Oct 22, 2010
Tips for a great answer:
Oct 07, 2016 | 2003 Oldsmobile Silhouette
Dec 18, 2015 | Ford Cars & Trucks
Dec 18, 2015 | Cars & Trucks
Dec 01, 2015 | 1987 Oldsmobile Cutlass Salon
Dec 18, 2012 | 1996 Ford Windstar
Apr 15, 2011 | 2001 Chevrolet Malibu
Feb 06, 2010 | 1999 Buick Century
Dec 05, 2009 | 1988 Ford F 150
Dec 26, 2008 | 1997 Chevrolet Malibu
313 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: