Question about Harley Davidson FLSTN- FLSTNI Softail Deluxe Motorcycles
Posted by Anonymous on
Not an open wire. What is the charge on the battery. Sounds like maybe the voltage regulator is defective and the battery is draining back through it possibly. Disconnect it or pull the main fuse and see what happens then.
Posted on Oct 14, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Needles stuck indicative of instrument cluster complete failure. Cause unknown. This is second instrument cluster that has failed on this bike, first one failed at about 3000 miles, twenty-two months ago. This "new" one died in mid May 2008. Received word from Ducati North America that they will accept the warranty claim for the toasted instrument cluster!!! Am still concerned about cause...this is second instrument cluster for this S2R800. Seems to be an issue prevalent on some of these late model Monsters. Will update more after instrument cluster gets in and replaced by Bloodworth Ducati in Nashville.
Posted on Nov 20, 2008
SOURCE: Electrical problem
Hi and welcome to FixYa,
Initially, pls try recharging the battery again. Remove the connector to the voltage regulator. Start/run the bike. If it lasts more than "3-5 minutes" then you have just confirmed a defective regulator. The voltage regulator would look something like below image.
This page may give you additional insight.
Just a start, do postback how things turned up or should you need additional information. Good luck and Thank you for using FixYa.
Posted on Nov 25, 2008
sounds more like a fuel problem to me. is it cold there did you use stabilizer in the gas? try some berrymans B12 in the gas it cleans everything up internally. it worked for me
Posted on Mar 21, 2009
I would check the brake pads first to see if they are worn badly, spent a lot time once learning that will cause ABS lights to flash!
Grounding the middle pin on the ABS diagnostic plug , turn on the ignition and mash both brakes to see if the bulb checker light goes out! Very important, left out of procedure on IBMWR, if the red bulb checker light doesn't go out you have a blown tail light or stop light bulb and the ABS won't reset!
Or you have a bad bulb checker module underneath the seat. If the red light goes out then the ABS lights should go to flashing then push the ABS reset button and hold for slow count of 10 or so. Release and try it. Hope this helps!
Posted on Oct 16, 2009
Tips for a great answer:
Sep 21, 2015 | Saddlemen Heated Road Sofa Deluxe Touring...
Apr 05, 2013 | 1985 Honda GL 1200 Aspencade Gold Wing
Jun 24, 2012 | 2009 Honda VT750DC Shadow Spirit
May 06, 2012 | Husqvarna 22HP VTwin Hydrostatic 42" Cut...
Apr 25, 2011 | 2005 Harley Davidson FLSTN- FLSTNI Softail...
Oct 08, 2009 | 2005 Suzuki Boulevard C90
Jun 16, 2009 | 2000 Triumph Sprint ST
Apr 25, 2009 | 2003 Harley Davidson XL 1200 C Sportster...
Feb 22, 2009 | 2003 Ducati Monster 620s i.e.
112 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: