Question about 2006 Derbi Atlantis Bullet

1 Answer

Signal lights work with key on engine off but once engine is started signal lights will not flash. What could be the problem?

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Derbi Master
  • 43,120 Answers

Hi Anonymous, before diagnosing any turn signal issue make sure the bulb is good and the light fuse has continuity with a test light. If you have replaced you OEM lights with LED lights you are going to need a load equalizer. If no turn signals work the cause could be a faulty turn signal module or the connector going to it, look for corroded, loose, or broken pins/sockets. Contact spray cleaner is great for removing corrosion. If your speedometer does not function properly it will have to be fixed first because your turn signal module gets the data from the speedometer for normal turn signal function. If your front turn signals don't work use a test light to check for power and ground at the bulb socket, then start backtracking the wiring through every wire connector to the turn signal switch/button and check for continuity, go all the way back to the fuse if necessary to find the cause of the malfunction. If your rear turn signals don't work check your rear fender wiring harness connector first for corroded, broken, loose pins/sockets, power, and a good ground, (the harness connector is usually located under the seat on the front of the rear fender) then keep tracing the wiring look for obvious harness damage caused by the rear tire. If you still can't find the malfunction backtrack from the rear fender wiring harness connector. If one side does not work you could have a faulty turn signal switch or module check for continuity. For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day. Indicators not working
LED turn signal conversion XT660 com The 1 XT660 Resource
https://scootergrisen.dk/scooterhjemmeside/download/derbi_gp1_servicemanual.pdf
https://www.oemmotorparts.com/oem2.asp?M=Derbi
http://www.derbi.com/fr/images/stories/modelos/37/manual.pdf

Posted on Mar 06, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Have a securety sysm


Turn your key on. Do not try to start the engine. Leave the key on for 10 minutes, until the security light stops flashing. Turn off the key when the light stops flashing. Then, turn on the key and crank the engine. It will start.

Feb 13, 2015 | 2006 Chevrolet Cobalt

1 Answer

My Honda Civi ESI 1993 model has a problem. The check engine light is randomly appearing when I'm driving, and once it appears, the engine shuts down right away. The check engine light has 1 long flas


code 15 is ignition output signal, an electrical problem. The engine computer sees no spark signals coming from the igniter. This is a good job for a Honda mechanic who isn't afraid of electronics.
http://s639.photobucket.com/user/RonJ_HT/media/picture_3699.jpg.html

Dec 09, 2014 | 1997 Honda Civic

1 Answer

2002 hd 1400 has a #2 code showing up will not clear


If you've got that Engine light coming On for 4 seconds, Off 4 seconds then On 8 seconds then out, its historic. (there WAS a problem that has now cleared)
If its On 4, Off 4 then remains On its a 'current' code.

I never heard of a #2 code.....they are read as a two digit code.

Here's one method some use to clear all codes:

Disarm alarm if so equipped.
Run/Off switch to OFF
Ignition Key: ON,OFF,ON,OFF,ON (and leave ON)
Press LEFT turn signal switch TWICE. Wait for 1 or 2 flashes..
Press RIGHT turn signal switch ONCE => turn signal will flash 1 time
Press RIGHT turn signal switch ONCE => turn signal flashes 2 times
Press RIGHT turn Signal switch ONCE => turn signals flash 3 times
Press LEFT turn signal switch ONCE. TROUBLE CODES WILL NOW BE DISPLAYED
TO CLEAR ANY CODES,,,=> PRESS & HOLD LEFT signal switch for 5 seconds. => turn
signal will now flash twice to confirm memory is clear.
Turn ignition OFF.

Sep 28, 2014 | Harley Davidson FLHX Street Glide...

1 Answer

Flashing security light, engine won't start


The security, antitheft, or passlock light is a visual indication that something in the car's antitheft system is failing. In most GM cars and trucks there is a hidden system that most people are unaware even exists. From the moment you put your key in the ignition, there begins a constant line of communication between your key's security chip or transponder, to the ignition's lock cylinder, and then to the car's TDM (Theft Deterrent Module). These 3 parts are in CONSTANT communication. If the key is in the ignition, then these parts are sending signals to each other. The security light illuminates when that signal gets broken, even just for a second. When the signal breaks, the car misinterperates this as an attempt at theft and goes into antitheft mode. The car thinks its being stolen or hotwired because it is not getting that signal from YOUR specific key. This is why the security light turns on and shuts down your vehicle.
This link may help you find ways to bypass this or fix it yourself.
http://vatspasslockpasskeysecurityhelp.yolasite.com/

Mar 01, 2013 | Cars & Trucks

2 Answers

I just finished replacing the head gasket on my car. Everything was put back together. New oxygen sensors, oil, spark plugs. Everything is in the right spot cause when i check the code nothing reads on it....


Hello it is not easy to use a computer with a 4 year old constantly trying to get your attention.Anyhow i said disconnect your battery wait 5 minutes to reboot the computer i have gone through your situation a dozen times if it doesn't start it should trip your check engine light and you will be able to scan and retrieve keep me posted.John

Jan 02, 2011 | 1998 Plymouth Neon

2 Answers

How do u diganose engine codes on a 1985 dodge 600 se 2.2


If you have an obd reader, there is a wire under the hood on the passenger side where obd connector can be plugged

Aug 26, 2010 | 1985 Dodge 600

1 Answer

The remote engine start worked last month. Now it does not.


it could be just the battery in your key fob,, it takes more "juice" to use it for the remote start

Apr 15, 2010 | 2008 Chevrolet Cobalt

Not finding what you are looking for?
2006 Derbi Atlantis Bullet Logo

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Derbi Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Derbi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...