Question about 2000 Harley Davidson XL 1200 C Sportster Custom

2 Answers

1998 hd 1200 sportster turn signal quit working

Turn signal quit working

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Harley Davidson Expert
  • 284 Answers

Check the wiring under the rear tire. you probably tore the wires. if that's fine. do your flasher work? if they do then double check the bulbs. if they're fine them it could be the tsm ( turn signal module ) Only consider replacing that if the wiring is fine and the turn signals worked fine before

Posted on Jun 27, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I had the same problem and found wire broken to the left turn signal. you have to remove strut to access wiring. Be carefull when strut is removed when you go to reinstall it decompresses and cant get it back on. I removed lower bolt and stalled upper bolt first and it was easer to move around. I added zip ties to two locations after rerouting wiring

Posted on Oct 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Diagram sportster wiring


More information would be helpful.

Do any lights work, ie signals, four ways. Does rear brake light work and just not light when front brake is applied.

If all lights are dead did you check the lighting fuse?

Fuse panel is under the left side cover.

Jun 07, 2014 | 2000 Harley Davidson XL 1200 S Sportster...

1 Answer

Right hand signal will not cancel.


Did you replace the stock turn signals with LEDs?

If so you probably need a "Load Equalizer"

Feb 24, 2014 | 2000 Harley Davidson XL 1200 C Sportster...

1 Answer

Turn signal My right signal lite works fine but left comes on and does not flash.1998 sportster. Has all new switches. Any help appreciated. David


Hi David, try checking the wiring harness connector to your turn signal module for corroded, broken or loose pins and for a free wiring diagram please visit the website below and good luck. Harley Davidson Wiring Diagrams and Schematics

Jun 28, 2013 | 2000 Harley Davidson XL 1200 C Sportster...

1 Answer

HAVE 2001 Sportster 883 SPORTSTER XLH, added a LED light to the sissy bar, rear turn signal a breaks really bright. Back lights quit working removed the LED. Still no rear brake light or turn signals,


Hi V-twin, call, take a ride or trailer your bike over to your local dealers service/parts department, I'm sure they will be happy to take your Harley Davidson for a test ride if necessary/possible and offer professional advice and assistance concerning your issue. Good luck have a nice day.

Jul 17, 2012 | 2000 Harley Davidson XL 1200 S Sportster...

1 Answer

Runnin lights dont work but blinkers do


The only running lights will be the front. Make sure there are 3 wires going to the front turn signals. If not then you have a set of rears on the front. The wire color for the running light side is blue. That can be ( or should be ) attached to an Orange/ white wire ( that is a typical key on hot for Harley ) I would also double check the ground on them as well, since the turn signal can actually pick up a ground by back feeding through itself, but would still not let the running light to work

Jun 27, 2009 | 2000 Harley Davidson XL 1200 S Sportster...

2 Answers

Speedo, turn signals, brake lights, horn stopped working. All else is fine.


Gap your plugs to 38 thou. Check all your bulbs (one burned out will affect the rest) Take a look at all your fuses and make sure they are all ok. Otherwise you are probably looking at a wiring short which will require trouble shooting of the elctrical system. Buy your self a service manual for your bike, this will help you a lot.

Jun 03, 2009 | 2005 Harley Davidson XL 1200 C Sportster...

Not finding what you are looking for?
2000 Harley Davidson XL 1200 C Sportster Custom Logo

1,232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...