Question about 1993 Harley Davidson FXR Super Glide

1 Answer

How do i replace 92 super glide speedometer ? cant get the odometer reset arm out, to get the unit out of the consol

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Harley Davidson Expert
  • 300 Answers

There is a small screw in the center of the knob. If the screw head is worn or damaged, then the only option is to break the knob to remove to speedo. This is easily done with a pliers.

Posted on Jan 15, 2015

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: my 2002 super dyna glide's

speed-o is electric check for loose conections. wiggle conecters. if not there try checking contanuity. mine had a broken wire between conector on the neck and speed-o, where the tach was spliced in. under the outer sheath so it's hard to find visualy, but the meater will show a break. make sure to wiggle harnass while teasting.

Posted on Jul 29, 2011

  • 3799 Answers

SOURCE: 2000 FXD super glide..47k miles..riding at highway speed my battery got super hot,tach stopped,speedometer stopped and then engine stopped running.i can not touch battery box without burning my self.s

Check the regulator. It sounds as if it has packed in, when the engine is at idle the alternator output is low, but when revved it will be higher, the regulator controls the top end of the voltage range. Also check the battery connections are tight and free from corrosion.

Posted on Mar 23, 2012

Testimonial: "checking charging voltage ,over charging the system @ 18volts...ordered new Harley voltage regulator...thanks for info & help."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to access computer?


Turn the Ignition switch to the OFF position.

Set the Run/Stop switch to the Run position.

Push in the odometer reset button and hold.

Turn on the ignition switch and release the odometer reset button.

The process has been completed correctly when the speedometer needle sweeps across the speedometer and all indicator lamps illuminate. The speedometer will also display "DIAG."

Press the odometer reset button once. "PSSPt" will display on the speedometer. Each letter signifies an area of the diagnostics testing, with the current selection flashing.
Push the odometer reset button to scroll through the components for testing.

Press and hold the odometer reset button for 5 seconds, then release. Any codes stored will be displayed on the speedometer. If no codes are stored, the speedometer will display "NONE."

Press the odometer reset button again to view additional codes, if any.

Record the codes and repost for possible faults or conditions.

Turn off the Ignition switch to exit the diagnostics testing.

Sep 18, 2014 | 2004 Harley Davidson FLHTCUI Electra Glide...

Tip

Volvo service light 1996-00


850,
S70,
V70,
S80


1996-97,
1998-00,

1999-00

Service reminder lamp must be reset with either a Scan Tool Connected to the Data Link Connector (DLC), or connect a Volvo Rest Tool to the DLC and press the button on the tool to reset.


240


1986-93

When the "SERVICE" is illuminated, reach behind the instrument panel and push the level located between the tachometer and speedometer.


740,780


1986-88,
1988-90

When the "SERVICE" light is illuminated, reach behind the instrument panel and press the button located to the right of the speedometer.


740,
760,
850

w/ Yazaki Cluster*,
940,
960


1989-92,
1986-90,
1991-97

When the "SERVICE" light is illuminated, remove the cap on the face of the instrument panel between the clock and the speedometer. Insert a thin-bladed tool into the cavity and press the reset button.

*Odometer above the speedometer needle.


All Models


1999

Press and hold trip odometer reset button. Next, turn the ignition key to the run position KPII (not the start position). Wait 30 seconds or until service light begins blinking. Turn the ignition to off position. Release the Trip Odometer button.


850

w/ VDO Cluster*

All Years

To reset the Service Reminder Indicator, turn the ignition on while the engine is not running. Access the diagnostic unit located on the left fender well under the hood. Connect the single wire plug to terminal #7. Press the reset button four times shortly. When the LED glows, press the button once. When the LED glows steadily again, press the button five times. When the LED glows steadily again, press the button once. After the LED gives a couple of rapid flashes, the system is reset. Unplug the connector and turn the ignition off.

*Odometer located below the speedometer needle.











on Dec 07, 2009 | Volvo 850 Cars & Trucks

1 Answer

What are the symptoms of a bad crank shaft sensor on a harley


If the sensor is bad, it'll throw a PO374 error code.

You DID check for any error codes, right?

Turn the Ignition switch to the OFF position.
Set the Run/Stop switch to the Run position.
Push in the odometer reset button and hold.
Turn on the ignition switch and release the odometer reset button. The process has been completed correctly when the speedometer needle sweeps across the speedometer and all indicator lamps illuminate. The speedometer will also display "DIAG."
Press the odometer reset button once. "PSSPt" will display on the speedometer. Each letter signifies an area of the diagnostics testing, with the current selection flashing. Push the odometer reset button to scroll through the components for testing.
Press and hold the odometer reset button for 5 seconds, then release. Any codes stored will be displayed on the speedometer. If no codes are stored, the speedometer will display "NONE."
Press the odometer reset button again to view additional codes, if any.
After any codes, the part's serial number (in what ever component you're in) will scroll across.
Record the codes and refer to your service manual (or post for others to look up) for possible faults or conditions.
Turn off the Ignition switch to exit the diagnostics testing.

Aug 18, 2014 | 2004 Harley Davidson FLHTCUI Electra Glide...

1 Answer

Diagnostic trouble codes for 2004 harley flhtc


Turn the Ignition switch to the OFF position.
Set the Run/Stop switch to the Run position.
Push in the odometer reset button and hold.
Turn on the ignition switch and release the odometer reset button. The process has been completed correctly when the speedometer needle sweeps across the speedometer and all indicator lamps illuminate. The speedometer will also display "DIAG."
Press the odometer reset button once. "PSSPt" will display on the speedometer. Each letter signifies an area of the diagnostics testing, with the current selection flashing. Push the odometer reset button to scroll through the components for testing.
Press and hold the odometer reset button for 5 seconds, then release. Any codes stored will be displayed on the speedometer. If no codes are stored, the speedometer will display "NONE."
Press the odometer reset button again to view additional codes, if any.
Record the codes and refer to your service manual for possible faults or conditions.
Turn off the Ignition switch to exit the diagnostics testing.

Repost what error codes you get.

Mar 08, 2014 | 2004 Harley Davidson FLHTC - FLHTCI...

1 Answer

How to remove a 97 dyna super glide speedometer


I am not familiar with this vintage of DYNA but you should have instructions that come with the new fuel gauage and if you do not a Harely parts or service person should be able to print them off for you.

Mar 07, 2013 | 2003 Harley Davidson FXD Dyna Super Glide

1 Answer

2000 FXD super glide..47k miles..riding at highway speed my battery got super hot,tach stopped,speedometer stopped and then engine stopped running.i can not touch battery box without burning my self.s


Check the regulator. It sounds as if it has packed in, when the engine is at idle the alternator output is low, but when revved it will be higher, the regulator controls the top end of the voltage range. Also check the battery connections are tight and free from corrosion.

Mar 23, 2012 | 2002 Harley Davidson FXD Dyna Super Glide

1 Answer

Speedometer not working 2000 harley davison and engine light is on


Here is some 2001 information that may be helpful



The 2001 DYNA electronic speedometer consists of a speed sensor, an odometer reset switch and the speedometer itself. The speed sensor is located on the right side of transmission case below the starter. It is a Hall Effect sensor that is triggered by the gear teeth of 4th gear on the transmission mainshaft. The output from the sensor is a series of pulses that are interpreted by speedometer circuitry to control the position of the speedometer needle and the liquid crystal (LCD) odometer display. The odometer mileage is permanently stored and will not be lost when electrical power is turned off or disconnected. The odometer reset switch allows switching between the odometer and the trip odometer displays. To zero the trip odometer, while having the odometer display visible, press and keep the function switch depressed. The trip odometer mileage will be displayed for 2-3 seconds and then the trip mileage will return to zero miles. The odometer can display six numbers to indicate a maximum of 999999 miles. The trip odometer can display six numbers with a tenth of a mile accuracy for a maximum of 99999.9 miles. Circuitry in the speedometer also uses the sensor input to provide an input to the turn signal canceller. This turn signal canceller input was previously supplied by the reed switch in mechanical speedometers.


DIAGNOSTICS

To enable diagnostic mode depress the odometer reset switch and turn ignition/key switch to ON, to clear codes turn the ignition switch from OFF to ON while holding the reset switch in. Press and release the reset switch to cycle through the codes. Set codes will display as Code d0xSet. Holding the reset switch in will result in Code d0xClr being displayed indicating that the code has been cleared. To return the speedometer to the normal operating state cycle the ignition/key switch.


Remove the seat for testing. Remove the speed sensor and check for accumulation of debris on it and if there is any debris present, clean it away and if there is not debris replace the sensor.


Disconnecting the speed sensor will cause code d02 to set.



ODOMETER, TRIP ODOMETER AND RESET SWITCH TESTING


Turn the ignition ON. Does odometer display consist of the correct numbers?

If YES Press trip reset switch. Does the LCD display toggle between trip and odometer modes? BUT if the odometer display does not consist of the correct numbers replace the speedometer.


If the speedometer does display the correct numbers press the trip reset switch. Does the LCD display toggle between the trip and odometer modes? If No Loosen the trip reset switch boot and then tighten it again until it is snug and toggle the switch again and verify if it toggles between trip and odometer modes? If YES does the trip display consist of correct numbers? If it does STOP here and go to test 2A If No replace the speedometer.


If loosening and retightening the reset switch boot results in okay toggling between the trip and odometer modes the Speedometer is OKAY. If it does not, then remove the rubber boot from the reset switch and toggle it without the rubber cover and if it now toggles between the trip and the odometer modes replace the reset switch boot/cover. If it does not now toggle between the trip and odometer modes place a jumper wire across the leads to the reset switch on speedometer connector. Does the LCD display now toggle between the trip and the odometer modes? If yes replace the reset switch and if No replace the speedometer.


Speedometer Test 2A

SPEEDOMETER INOPERATIVE, READS HIGH/LOW, NEEDLE STICKS, INTERMITTENT/ERRATIC, OUTPUT SPEED SIGNAL INOPERATIVE


Turn ignition ON. Is speedometer backlighting on? If NO then If speedometer backlighting is not on, check for 9-12 VDC on the O/W wire at connector

[39B]. If the proper voltage is present check for continuity to ground on the BK wire at connector [39B]. If there was not appropriate voltage on the )/W wire at connector [39B] locate and repair an open in the O/W wire.

If there is continuity at the BK wire at connector [39B] replace the speedometer. If there is not locate and repair an open in the BK wire.


If there is backlighting enable diagnostic mode and clear codes. Then recheck for codes. If there are any codes present go to the applicable

code in Speedometer Test 2B (d0x).

If there are no codes set return the speedometer to its normal state, raise the rear wheel from the ground, put the transmission in 5th gear, turn the ignition ON, spin the back tire, enable diagnostic mode and check for codes and if there are any codes set now make repairs to the harness/connections.

Jun 26, 2011 | 2000 Harley Davidson FXD Dyna Super Glide

1 Answer

My 92 honda civic speedometer works only half the time


check the connection from speedometer to transaxle. Often this becomes loose, especially the transaxle side. Also 92 was a first year model and have heard many wacky problems.

May 28, 2009 | 1992 Honda Civic

Not finding what you are looking for?
1993 Harley Davidson FXR Super Glide Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4525 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...