Question about 2007 Honda ANF 125 Innova

1 Answer

How do you adjust the cam chain tension on a Honda Innova - 7?

I am not sure whether the cam tensioner is spring loaded or a manual adjustment. How do yo tension the cam chain correctly?

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Honda Master
  • 39,966 Answers

Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing and printing please click on the blue links below. Good luck and have a wonderful day.
cam chain tensioner
HONDA INNOVA 125I ANF125 The Cam Cain Tensioner Removal Installation
Honda ANF 125 Innova 2007 service manual DOWNLOAD FREE FULLMANUALS COM
http://www.partsfish.com/page/oem-parts-for-honda
Honda ANF125 Owner Manual

Posted on Aug 04, 2017

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3567 Answers

SOURCE: on 2005 honda cmx 250 rebel does cam chain

Your bike has an automatic adjusting cam chain tensioner. No adjustment needed.

Can I get a “very helpful” rating on this answer? < And it doesn’t cost anything extra!

Posted on Jul 06, 2009

  • 164 Answers

SOURCE: CBX cam chain adjuster does not lock

yes it is safe for you to remove the tensioner unit whilst the engine is off however Iam inclined to think from what you describethat you are due for a new timing chain

Posted on Apr 22, 2010

heimlich
  • 1978 Answers

SOURCE: vt500 c ticking sound. Cam chain tensioners

You have a self adjusting cam chain tensioner. It is sold as an assembly. Take out the complete unit and replace it with a new one. The springs are not bad , the device that keeps the pressure on the tensioner is slipping causing a ticking sound.

Posted on May 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to adjust a CBR 125 r tensioner


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Manual Cam Chain Tensioner CBR 125 CBR Forum Enthusiast forums for Honda...
Honda CBR 125 Timing chain adjustment tensioner tensioning
Honda CBR125R Owner Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda CBR125RW Owner Manual

Jan 23, 2014 | 2006 Honda CBR 125 R

1 Answer

How can i reduce timing chain noice in hero honda splender


some bikes have an adjustment nut - connected to a plate that applies tension to the cam chain - if not - it may need to be replaced ( I believe some are self adjusting - but not sure ) - best to buy a shop manual, ( OEM or Clymer Manual ) or download one on line - its cheap insurance - it will tell you how much tension to apply -

Nov 27, 2013 | 2011 Hero Honda Splendor Plus

1 Answer

Cam chain rattle on 2004 honda cbr125r


Hi, Anonymous you need to replace the cam chain tensioner for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Rattle Cam Chain Or Tensioner
Cbr engine rattle cam chain tensioner adjustment
Honda CBR125R Owner Manual service
http://www.partsfish.com/page/oem-parts-for-honda
Honda CBR125RW Owner Manual

Jun 04, 2012 | Honda CBR 125 R Motorcycles

1 Answer

I am trying to determine if the adjustment bolt located below the carbs between the second and third cylinders is for setting the cam chain tension and how to set it . There is some cam chain noise at low...


Yes, it is the cam chain tensioner. With the engine off, just loosen the tensioner lock bolt then strongly tap a few times on the tensioner casing with a screwdriver handle. This will free up the spring loaded tensioner. Now just re=tighten the tensioner lock bolt and you're done. Please rate my answer. Thanks. tombones49_157.gif

Jun 05, 2011 | Yamaha XJ 650 Motorcycles

1 Answer

Xr 350 timing chain slop makes noise can i adjust it


Both the 1985 honda xr250r and xr350 look loke they have self adjusting cam chain tensioners. You may have a broken tensioner or tensioner guide. With the age of the bike you may need a new cam chain. There is nothing to adjust so you need to just figure out if the chain is stretched , if a guide is broken, or if the tensioning mechanism is malfunctioning.

Oct 01, 2010 | 1985 Honda XR 250 R

1 Answer

I have recently purchased a 1984 model 750cc honda magna, how will adjust the cam tensioner


The cam chain tensioner is self adjusting. If the tensioner is worn out, the tensioners are best replaced by a motorcycle shop unless you have the skill, tools, and a manual.

Aug 17, 2010 | 1982 Honda VF 750 S

1 Answer

Vt500 c ticking sound. Cam chain tensioners pretty sure its the cam chain tensioner springs. lost their spring If its been making this noise for a while what else would i need to replace. cam...


You have a self adjusting cam chain tensioner. It is sold as an assembly. Take out the complete unit and replace it with a new one. The springs are not bad , the device that keeps the pressure on the tensioner is slipping causing a ticking sound.

May 16, 2010 | 1985 Honda VT 500 C Shadow

2 Answers

Can u adjust the timming chain on a yamaha xj 600 1998 model


The XJ600 has a self adjusting timing chain tensioner, although it's robust enough, like the previous post say's they can stick. To remove the adjuster look at the back of the engine on the cylinder head, the tensioner is there, two bolts hold it on one above and one below. to remove the tensioner there is a spring tensioner in the centre of the unit, undo this with care it hold the pressure spring in place on the plunger. Now remove the retaining bolts very carfully, equal turns on each bolts (do not take one out fully, leaving the other in place fully tight).
Once off the engine DO NOT ROTATE the engine. The tensioner should move freely, although there is a rachet system that locks it out, if it moves out freely then it's fine. To re-fit the tensioner release the tensioner make sure it's adjusted fully inwards and use a fresh gasket. The tensioner only firs one way, if it won't fit don't force it and it can be broken easily. Tighten both retaining bolts evenly and per the removal. Re-fit the tensioning spring and retaining bolt (do not over tighten) the plunger is self adjusting from here.

Mar 13, 2010 | 1998 Yamaha XJ 600 Diversion S-N

2 Answers

Intermittent clicking in motor. Seems less noticable when the engine is hot. Wondering if the cam cain adjuster needs to be replaced?


Or just adjusted. Not sure if this has a spring-loaded type or screw-adjustable, but the spring types can get sticky and need taken out and cleaned, and a new spring fitted sometimes. The adjustable type just need adjusted until you can hear a whining noise from the top-end of the engine. Once it whines, back off th adjustment by 1/4 turn and that should do it,

Sep 16, 2009 | 1987 Honda VT 1100 C Shadow

1 Answer

On 2005 honda cmx 250 rebel does cam chain tensioner need to be adjusted and if so what is proper procedure?


Your bike has an automatic adjusting cam chain tensioner. No adjustment needed.

Can I get a “very helpful” rating on this answer? < And it doesn’t cost anything extra!

Jul 06, 2009 | Honda CMX 250 Rebel Motorcycles

Not finding what you are looking for?
2007 Honda ANF 125 Innova Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...