Question about Honda VT 500 C Shadow Motorcycles
Posted by Anonymous on
Usually the problem is with gearshift lever. Move it 1-2 teeth up or down.
Posted on Sep 27, 2016
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
if the tail light is working, then look at the sensor, it is placed under the seat( it is a small black box 2x1,5cm) disconnect and clean contacts. Also put some contact spray in other wire joints.
Sorry for my English
Posted on Apr 23, 2009
Based on the information you have provided I suspect a bent shift fork in your transmission. To fix it you will have to take the transmission cover off and get at that fork. Replacing the fork is probably easiest, the labor to get to it is the expensive part.
Posted on May 27, 2009
SOURCE: HOW DO YOU CHANGE THE
There are four spark plugs to change. The spark plug wrench in the motorcycle tool kit will remove and replace the plugs. If the tool kit is missing you can go to the Honda dealer and order just the spark plug wrench (separately off the microfiche tool kit page) necessary to do the job (about $10). The Honda spark plug wrench has a built in grabber to lift the plug out of the deep head access hole.
Posted on Jan 12, 2011
SOURCE: What type of Motor oil
only a JASO MA
certified motorcycle oil. Automotive oil uses different additives and
will shorten the life of your wet clutch and transmission gears. Shell
Rotella T for diesel engines , both standard and synthetic are JASO MA
oil is good for cold climate. 20w-50 for hot climate/touring. Synthetic
oil will make your cycle run cooler and shift easier. For the engine you will probably need four quarts
of oil, a spin on filter,and a drain plug washer . Pour in three quarts and check the oil level by placing your
motorcycle on the center standard looking at looking at the dip stick. Run the motor and top up as
needed. If changing the oil filter you will have to run the motor to get
an accurate oil level reading. You will use between 3.2 and 3.4 quarts.
Your final drive uses 80/90 hypoid gear oil. Synthetic hypoid oil will reduce friction and make your final drive run cooler.
Posted on Feb 20, 2011
Tips for a great answer:
May 06, 2014 | 1984 Honda VT 500 C Shadow
Apr 16, 2014 | 1984 Honda VT 500 C Shadow
Jan 06, 2014 | 1984 Honda VT 500 C Shadow
Dec 21, 2012 | 1984 Honda VT 500 C Shadow
Jul 12, 2012 | 1984 Honda VT 500 C
Feb 20, 2012 | 1984 Honda VT 500 C Shadow
Jan 09, 2012 | 1985 Honda VT 500 C Shadow
Oct 04, 2011 | 1984 Honda VT 500 C Shadow
Oct 03, 2010 | 1984 Honda VT 500 C Shadow
May 19, 2010 | 1984 Honda VT 500 C Shadow
20 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: