Question about 1993 Honda VT 600 C Shadow
Posted by Anonymous on
Hi, Anonymous after careful deliberation 4 out 5 Honda Gods give this one a thumbs up, but just to be on the safe side you should give your local dealer's parts/service department a call to confirm.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Bridging The Fuel Pump Relay
Way around the VT1100 Fuel Pump problem
Honda VT600C Shadow VLX Service Manual
Honda VT600C Owner Manual
Posted on Jul 15, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It is located underneath the seat.
You remove the right hand plastic cover under the seat and you will see another cover which holds relays and stuff.If you remove that too you will see the battery.
Check here for details
Posted on Jul 03, 2009
There is a petcocke on bottom of radiator to open and drain fluid. Then refill through tube or highest part of radiator with 50/50 mixture
Posted on Jul 09, 2009
It is different then most other carbs. DON"T DRILL ANY BRASS HEADS LOOKING FOR THE AIR FUEL MIXTURE. The air fuel mixture is the only adjustment you can make. It is located on the bottom side of the air intake, right behind the air filter box. It looks like a 1/4" flat metal plug. Do NOT drill this. There is no slot for a screw driver. There is a tool which is no more then a small piece of pipe that fits over this plug and you turn it in till seated, gently. Count the turns. Back out to 2 and a half turns, thats normal. Or if you no that you need more fuel injected, simply turn the screw OUT 1/4 or 1/2 turn and try it. GOOD LUCK (Its not hard)
There is no drilling to be done. Hope i didnt scew something up on mine......
Posted on Sep 03, 2009
I've got a 2007 Shadow and recently put on a set of saddlebags. What you do is use a large allen wrench or star wrench on the seat strap to take out those two bolts, and then you slide the seat towards the back of the bike (or perhaps you need to slide it to the front, I forget, its just the "picture-hanging" connection, <=0 is the shape of the hole on the seat, and on the bike beneath it is a peg, with the seat hole large enough to slide the peg through, but once you shift the seat to its natural position the head of the peg is at a place too narrow to come off, hence the sliding motion to remove it) . Then it is smooth sailing, just lay your saddlebags over the peg with the seat removed, and try and put the seat back without disrupting the bags too much, which can be hard since its a pretty snug fit. Hopefully that helped, I don't know if the request was talking about post market support frames or something
Posted on Apr 26, 2010
You probably have some gelled gas in the carbs. Take off the fuel line going into the carbs and spray some carb cleaner directly into the bowls. This may take care of a minor clog. If this does not work , you will have to take the carbs off and clean the slow jets and slow circuit passageways before the bike will idle normally again.
Posted on Aug 31, 2010
Tips for a great answer:
Nov 20, 2016 | 2003 Honda VT 750 CD Shadow A.C.E. Deluxe
Aug 18, 2011 | 2005 Honda VT 750 Shadow Aero
Aug 25, 2010 | Honda VF 750 S Motorcycles
Aug 15, 2010 | 2003 Honda VT 600 CD Shadow
Apr 09, 2010 | 2008 Honda VT 750 Shadow
Jul 09, 2009 | 1993 Honda VT 600 C Shadow
Aug 19, 2017 | 2001 Aprilia RSV Mille R
25 people viewed this question
Usually answered in minutes!