Remove the screw and air cleaner cover, remove the three TORX screws and the bracket from the filter element, gently pull both rubber breather tubes from the back of the element, remove the filter element and gasket, replace the filter element if damaged or if filter media cannot be adequately cleaned, gently pull the breather tubes from the breather bolts on the backplate, clean the filter element by washing the paper/wire mesh air filter element and the breather tubes in lukewarm water with a mild detergent, do not strike the filter element on a hard surface to dislodge dirt, allow the filter to either air dry or blow it dry from the inside with low pressure air. Do not use air cleaner filter oil on the Harley-Davidson paper/wire mesh air filter element. c. Hold the filter element up to a strong light source and if light is uniformly visible through the element, it is sufficiently clean.
172 views
Usually answered in minutes!
×