Question about 2006 Harley Davidson FLHR Road king
The tail light works and the fender light also works but not the turn lights?
Posted by Anonymous on
On which side are the signals not working?? Is the brake light working??? Have you checked bulbs?? If you get an answer please post the solution as a comment.
Posted on Oct 16, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
under the side panel on the left side as you sit on the bike if you have a fairing from the factory there can be an extra fuse box there
Posted on Aug 22, 2009
Testimonial: "That did it! I also have purchased a service manual for the bike. Thank You."
You should have two filaments in the reat taillight lamp, one for tail light and one for brake light. You are not confusing these filaments/functions are you?
What you seem to be saying to me is that you have a lamp that had no tail light filament (burned out) but does have a brake light filament still intact.
Remove the light and check it visually and/or with a contunity tester.
I hope this helps you ...
If I misunderstood your question, please ask me again
Posted on Oct 02, 2009
The only "mystery box" that I can think of is the turn signal cancelling unit. It controls most of the lighting on your bike. The box is about an inch and a half wide by about three inches long, little over half an inch thick.
Disconnect the plug on the end of the box and check the pins to make sure they're clean. Also check for any sign of a short between the box and the light. I've seen people buy the box, and they ain't cheap, only to find out that they had a short somewhere in the wire. If you do have a short, the only thing you'll see is that the light won't work. It will not blow a fuse or anything like that. As far as I know, there is not way to test the output unless you've got a special plug made up to do so with. If you know someone that has one, swap the box out with a known good one. Last time I bought one of these boxes, it cost $150 and that was several years ago. Good Luck.
Posted on Nov 04, 2009
The unit must be grounded to the bikes frame. Connect it back up to the bike this time without pinching the wires. You should have a blue wire, a violet/brown wire and a black wire if you have the three wire unit, minus the black with the two wire unit. The blue wire is for the running light, the violet/brown wire is for the turn signal and the black wire is ground. If you don't have a ground wire, the metal part of the signal light itself is the ground.
Posted on Aug 10, 2010
SOURCE: when i turn my 1997
According to the schematic I'm looking at, your 1997 model Sporty came with front marker lights but not rear marker lights. To make sure, take the lens off of your turn signal light in the rear. Take the bulb out. Now, does the bulb have one or two filaments? If it only has one, then you don't have marker lights.
Let me know what you find.
Posted on Aug 17, 2010
Tips for a great answer:
Sep 13, 2016 | Suzuki GSX-R 750 Motorcycles
May 09, 2014 | 2006 Harley Davidson FLHR Road king
Oct 08, 2012 | 2011 Ducati Superbike 1198 SP
Jun 23, 2012 | 2007 Harley Davidson FLHTCU Ultra Classic...
Mar 16, 2017 | 1985 Honda VT 500 C Shadow
Oct 22, 2011 | 2005 Harley Davidson FXDWG - FXDWGI Dyna...
Aug 10, 2011 | 2008 Harley Davidson FXSTC Softail Custom
Sep 16, 2010 | 2003 Pontiac Vibe
Aug 22, 2010 | Harley Davidson FLHTCUI Electra Glide...
Oct 19, 2017 | Derbi Motorcycles
69 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: