Question about 2003 Boss Hoss BHC 355

1 Answer

I have a 05 boss hoss small block motorcycle...first the neutral indicator light started blinking and they went out, then the turn signals would work for about 10 seconds then stop working and now the speedometer is going haywire, needle bouncing all over and the odometer add miles every 20 feet

Posted by on

  • Dick
    Dick May 11, 2010

    Alan you obviously have an electrical problem but it's impossible to fix over the internet. You're going to have to get in there and start checking wires. Find the wire that goes to the neutral light and put power to it. Does it light now? If so the wire is broken somewhere downstream from where you added power or the sensor is bad. Your fusebox would be a good place to start, or anywhere that wires can chafe together.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Boss Hoss Master
  • 41,663 Answers

Hi, Anonymous it sounds like a wiring or connection issue for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
Motorcycle Gear Position Indicator Picaxe Controller test
DIY Gear Shift Indicator Kawasaki Fury Motorcycle
http://antakesuma.xyz/fds/b/boss-hoss-bhc-3-ls2-2008-custom-cruiser-v8-automatic-repair-manual.pdf
https://www.bosshoss.com/parts.asp
Boss Hoss Cycles Contact Us

Posted on Dec 27, 2015

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
DoubleClutch
  • 376 Answers

SOURCE: want to change head gaskets on boss hoss but would

its a Chevy engine so you will need info from Chevy

Posted on Sep 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Boss hoss trike Shaft drive oil


Hi, Anonymous I am sorry you can't find the first and best tool you ever bought for your Boss Hoss but despair not for a mere $0 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
Boss Hoss Cycles Product Specifications
Boss Hoss Cycles
http://antakesuma.xyz/fds/b/boss-hoss-bhc-3-ls2-2008-custom-cruiser-v8-automatic-repair-manual.pdf
https://www.bosshoss.com/parts.asp
Boss Hoss Cycles Contact Us

Apr 16, 2014 | Boss Hoss BHC 355 Motorcycles

1 Answer

Boss hoss fuel filter


Hi, Anonymous I am sorry you can't find the first and best tool you ever bought for your Boss Hoss but despair not for a mere $0 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
http://www.v8bikeriders.com/forums/showthread.php?t=37410
Boss hoss fuel filter Google Search
http://antakesuma.xyz/fds/b/boss-hoss-bhc-3-ls2-2008-custom-cruiser-v8-automatic-repair-manual.pdf
https://www.bosshoss.com/parts.asp
Boss Hoss Cycles Contact Us

Mar 25, 2013 | 2007 Boss Hoss BHC-3 ZZ4

1 Answer

Horn on my 2007 boss hoss sometimes quits


Hi Anonymous, first check for continuity at the power and ground wire at the horn, then check for continuity at the horn button, back in the day there was a small adjustment screw on the back of the horn, by turning it one way or the other you could set the limit on how much the diaphragm vibrated. For more information about your issue, please visit the websites below. Good luck and have nice a day. How Motorcycle Horns Work And Why They Fail
How to fix your motorcycle horn or any basic electromagnetic horn http://antakesuma.xyz/fds/b/boss-hoss-bhc-3-ls2-2008-custom-cruiser-v8-automatic-repair-manual.pdf
https://www.bosshoss.com/parts.asp
Boss Hoss Cycles Contact Us

Aug 15, 2012 | 2007 Boss Hoss BHC-3 ZZ4 SS

1 Answer

Rear brake light & signals not working .yellow indecater on handlebars not coming on .not a fuse


Hi Aryals, before diagnosing any turn signal issue make sure the bulb is good and the light fuse has continuity with a test light. If no turn signals work the cause could be a faulty turn signal module or the connector going to it, look for corroded, loose, or broken pins/sockets. Contact spray cleaner is great for removing corrosion. If your speedometer does not function properly it will have to be fixed first because your turn signal module gets the data from the speedometer for normal turn signal function. If your front turn signals don't work use a test light to check for power and ground at the bulb socket, then start backtracking the wiring through every wire connector to the turn signal switch/button and check for continuity, go all the way back to the fuse if necessary to find the cause of the malfunction. If your rear turn signals don't work check your rear fender wiring harness connector first for corroded, broken, loose pins/sockets, power, and a good ground, (the harness connector is usually located under the seat on the front of the rear fender) then keep tracing the wiring look for obvious harness damage caused by the rear tire. If you still can't find the malfunction backtrack from the rear fender wiring harness connector. If one side does not work you could have a faulty turn signal switch or module check for continuity. For more information about your issue, please visit the websites below. Good luck and have a nice day. diagnosing and repairing turn signal problems
Motorcycle Electrical System Maintenance Part 1 of 2
http://antakesuma.xyz/fds/b/boss-hoss-bhc-3-ls2-2008-custom-cruiser-v8-automatic-repair-manual.pdf
https://www.bosshoss.com/parts.asp
Boss Hoss Cycles Contact Us

Jul 12, 2010 | 2007 Boss Hoss BHC-3 ZZ4

1 Answer

I changed the oil and now the Boss is not moving-whats the problem it is a Boss Hoss 2001


Hi, Pamsbodyart for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
Thread Boss Hoss 502 vs 350 ZZ4 60 Experienced Biker but Rookie Boss Hoss...
Boss Hoss Motorcycle Forum
http://antakesuma.xyz/fds/b/boss-hoss-bhc-3-ls2-2008-custom-cruiser-v8-automatic-repair-manual.pdf
https://www.bosshoss.com/parts.asp
Boss Hoss Cycles Contact Us

Mar 07, 2010 | 2002 Boss Hoss BHC 355

1 Answer

LR brake lite and turn signal


Hi, Giterdunn2 I am sorry you can't find the first and best tool you ever bought for your Boss Hoss but despair not for a mere $0 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
Troubleshoot Repair motorcleTurn signal light
DIY Troubleshooting Motorcycle Electrical Issues
http://antakesuma.xyz/fds/b/boss-hoss-bhc-3-ls2-2008-custom-cruiser-v8-automatic-repair-manual.pdf
https://www.bosshoss.com/parts.asp
Boss Hoss Cycles Contact Us

May 21, 2009 | 2001 Boss Hoss BHC 355 Hp

Not finding what you are looking for?
2003 Boss Hoss BHC 355 Logo

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Boss Hoss Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Mike

Level 3 Expert

4339 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

15167 Answers

Are you a Boss Hoss Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...