Question about Suzuki RM 250 Motorcycles
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Trouble starting RM 250
i got a 2000 rm 250 and it used to be a cow to kick over i used to spend at least 20 min kicking to start it until i rebuilt the top end with a new piston and rings now it starts on the fourth or fifth kick if that doesnt help you need a new cpu good luck!!!!
Posted on Jun 23, 2009
Things to check are
1/ Short out plug wire to good earth to check for spark, if none check rest of sequence. If spark, replace spark plug.
2/ Next check wiring connectors from the ingition module to coil and ensure they are all tight.
3/ This is quite technical but the use of a digital / analogue meter is required.
4/ Place a meter on each wire to the coil and crank (Without spark plug in) there should be some voltage / current flow through the feed wires (Not the earth - Black) If nothing trace back to Generator.
5/ Forgot to mention the kill switch operation, if unsure bridge these wires together.
Other than that the other tests involve sound electrical knowledge and is beyond the scope of the average person.
A thought, if this model has a battery ensure its fully charged.
Posted on Dec 20, 2009
SOURCE: 1990 rm 250 repair manual.
The site listed below has exploded view diagrams of all sections of your bike with parts named. This will show location of your idle screw. The diagrams will also show how the kicklever goes together.
Posted on Nov 07, 2010
It means that unburned fuel collected in the exhaust pipe then ignited when the spark plug fired due to the rotation of the crankshaft. It also means the spark plug is firing and the cylinder is getting gas... too much gas. The engine is flooding out due to much choking of the carb during kick starting.
Posted on Aug 16, 2011
Tips for a great answer:
Apr 01, 2017 | 2015 Suzuki RM-Z 250
Mar 15, 2017 | Suzuki RM 250 Motorcycles
May 02, 2012 | Suzuki Motorcycles
Aug 16, 2011 | 2003 Suzuki RM 250
Apr 27, 2011 | 2003 Suzuki RM 250
Mar 26, 2011 | 2005 Suzuki RM-Z 250
Apr 04, 2010 | 2003 Suzuki RM 250
Apr 29, 2009 | 2004 Suzuki RM 125
18 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: