Clutch slave cylinder and push rod repair
SOURCE: Monster 2000 900ie Clutch noise
did it just start happening or has it happened since you got it?becuase those bikes have a dry clutch in them. which they make lots of noise.
SOURCE: need dry clutch torque specs for a ducati monster s4
The torque spec for a chutch nut on a 900 is 180-190Nm (136 ft. lb.) The torque spec for the clutch housing bolts (presure plate) is 30-34 Nm (23 ft. lb.)
SOURCE: need to bleed my clutch on 1998 ducati monster
Patience young Skywalker. It took me almost 3 hours to get a good clean bleed on mine. I suggest this method. Get a friend. One person goes down to the clutch bleed screw, the other stays on the clutch handle. Crack open the clutch bleed screw, THEN depress the handle slowly, and before the handle bottoms out tighten the bleed screw. Do this for 2 or 3 full resevoirs, and whatever you do, DO NOT let the resevoir go enpty. You MUST install and tighten the cap each time you fill fluid. It will not bleed without the cover in place. After you get a "pedal", pull the handle all the way to the stop, then release the bleed screw untill clear.
SOURCE: ducati monster 620 ie 2003 manual
There is some clown on ebay selling copies of the real thing for $20, I have a couple manuals here for my own ref, anything you need to know?
153 views
Usually answered in minutes!
×