Question about Motorcycles

Open Question

Color codes for wire's on the rear turn signals on in 2013 Harley Softail Fatboy.

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2017 Softail Deluxe turn signal LED kit not working


Hi, Traceyandchriscolvin you need a load equalizer for more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
Install LED Brake Lights Turn Signals on Harley Davidson Complete Guide...
Harley Davidson Softail Workshop Service Repair Manual 2016 $10
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
2016 Harley Davidson Softail Deluxe Owner Manual
Instant Tech Relief To speak to me personally absolutely "FREE"

Jun 12, 2017 | Harley Davidson FXST Softail Standard...

1 Answer

My 2013 Softtail Slim right side turn signals have stopped working. Bulbs & fuses are good


Hi, Bob before diagnosing any turn signal/running light/parking light issue make sure the bulb is good and the light fuse has continuity with a test light. If you have replaced you OEM lights with LED lights you are going to need a load equalizer. If no turn signals work the cause could be a faulty turn signal module or the connector going to it, look for corroded, loose, or broken pins/sockets. Contact spray cleaner is great for removing corrosion. If your speedometer does not function properly it will have to be fixed first because your turn signal module gets the data from the speedometer for normal turn signal function. If your front turn signals don't work use a test light to check for power and ground at the bulb socket, then start backtracking the wiring through every wire connector to the turn signal switch/button and check for continuity, go all the way back to the fuse if necessary to find the cause of the malfunction. If your rear turn signals don't work check your rear fender wiring harness connector first for corroded, broken, loose pins/sockets, power, and a good ground, (the harness connector is usually located under the seat on the front of the rear fender) then keep tracing the wiring look for obvious harness damage caused by the rear tire. If you still can't find the malfunction backtrack from the rear fender wiring harness connector. If one side does not work you could have a faulty turn signal switch or module check for continuity. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com Good luck and have a nice day.
No horn or left turnsignal Help please Harley Davidson Forums
Harley Davidson Softail Workshop Service Repair Manual 2013
http://partsfinder.onlinemicrofiche.com/stcharlesharleydavidson/showmodel.asp?make=hdmc
https://serviceinfo.harley-davidson.com/sip/vehicle/lookupForm
How 6ya Works 6ya A must have !!! Totally "FREE"

Dec 04, 2016 | 2013 Harley Davidson Softail Slim

1 Answer

How do you fix B1123 left turn output short to ground


Hi Luke, before diagnosing any turn signal issue make sure the bulb is good and the light fuse has continuity with a test light. If no turn signals work the cause could be a faulty turn signal module or the connector going to it, look for corroded, loose, or broken pins/sockets. Contact spray cleaner is great for removing corrosion. If your speedometer does not function properly it will have to be fixed first because your turn signal module gets the data from the speedometer for normal turn signal function. If your front turn signals don't work use a test light to check for power and ground at the bulb socket, then start backtracking the wiring through every wire connector to the turn signal switch/button and check for continuity, go all the way back to the fuse if necessary to find the cause of the malfunction. If your rear turn signals don't work check your rear fender wiring harness connector first for corroded, broken, loose pins/sockets, power, and a good ground, (the harness connector is usually located under the seat on the front of the rear fender) then keep tracing the wiring look for obvious harness damage caused by the rear tire. If you still can't find the malfunction backtrack from the rear fender wiring harness connector. If one side does not work you could have a faulty turn signal switch or module check for continuity. For more information about your issue, please visit the websites below, and for specific information or questions, please feel free to contact me at xlch@mail.com. Good luck and have a nice day. Harley Diagnostic Codes 04 to Present DG Custom Cycle http://fullmanuals.com/search/?q=2007+Harley+Davidson+FXSTC+Softail+Custom

Nov 09, 2015 | 2007 Harley Davidson FXSTC Softail Custom

1 Answer

I'm wiring lighted turn signal mirrors on my 2014 Harley davidson Softail Heritage, but I don't know what color the turn signal wires are


Best to get an electrical diagnostics manual. Rememebr that wiring is different form older bikes as now has HDLAN and BCM etc.

May 06, 2014 | 2011 Harley Davidson FLSTC Heritage...

1 Answer

Where's the oil drain plug for 2010 low fatboy harley


Which of the three drain plugs. Primary is on primary case below derby cover; transmission is on right side middle bottom of transmission, engine is at bottom of right rear frame down tube intermediately forward of rear tire. ALL are 5/8 inch hex plugs with 1/4 inch Allen socket in the middle of the plug.

Apr 13, 2014 | 2005 Harley Davidson FLSTC - FLSTCI...

1 Answer

I have a 94 Softail Custom and the fours ways and turn signals blink on their own while riding. I have taken the tank off and checked all the wires but can not find any bad wires.


Hi Bmyount, always check fuses and bulbs first, you could have a faulty turn signal module or a bad turn signal button/switch, remove it from the switch housing and check for continuity, check your wiring and connections from the turn signal switch to the turn signal module with a testlite. Make sure all wires are not worn or pinched and connector pins are not corroded, broken, or loose. For a free wiring diagram please visit the website below:
Harley Davidson Wiring Diagrams and Schematics

May 08, 2012 | Harley Davidson FXST Softail Standard...

1 Answer

Can i put a fatboy fender on my softail springer


Hi Anonymous, 4 out of 5 Harley Gods give this one a thumbs up, but just to be on the safe side contact your local dealers service/parts department for confirmation. Good luck and have nice day.

Jan 23, 2012 | Harley Davidson FXSTS Springer Softail...

1 Answer

Turn signal wiring was cut


Should only be 2 wires back there. Look at the opposite working side and it will have 2 wires also, one the same color and one a different color. The 2 wires matching in color are your ground wires for each side. Then you have a color for left and another color for right...Good luck

May 07, 2009 | 2003 Harley Davidson FXSTS Springer...

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...