Question about 2000 Yamaha YZF-R1

1 Answer

Some one try to steal my 2002 yamaha r1 they cut the wires from the key switch i put them back together and now the neutral light won't turn on

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Yamaha Master
  • 47,278 Answers

Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
NO neutral light now How to fix
R6 neutral light Didn start after attempted theft
2000 2001 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Posted on Aug 17, 2016

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 440 Answers

SOURCE: Intermittent problem with neutral light on a 2002 R1

The neutral swich is located behind the front sprocket cover
Ride Safe
Bike-Doc

Please mark this as helpful (if it has been!!)

Posted on Aug 14, 2009

Testimonial: "Hi,thanks, found it. Very useful Pete"

  • 3567 Answers

SOURCE: hi i was reconnecting the

Near the battery there is a fuse box. Use a multimeter to find the blown fuse(s).

Posted on Apr 02, 2011

czaa
  • 4752 Answers

SOURCE: Wiring on a 2002 R1 has been cut for HID's

u need a clymer manual that has wiring diagrams plus how is ur knowledge on ohms law and electrical components-ull want to do study on that also--or just bring it to an honest tech-salvage yards and independent shops hasum

Posted on Jun 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My2002 R1 won't start no green neutral light when I turn the key the yellow check engine light lights up


Hi, Kevin the ignition circuit cut-off system comprising of the side stand switch, clutch switch and neutral switch has the following functions:
a. It prevents starting when the transmission is in gear and the side stand is up, but the clutch lever is not pulled.
b. It prevents starting when the transmission is in gear and the clutch lever is pulled, but the side stand is still down.
c. It cuts the running engine when the transmission is in gear and the side stand is moved down.
Periodically check the operation of the ignition circuit cut-off system according to the following tests.
With the engine turned off:
1. Move the side stand down.
2. Make sure that the engine stop switch is set to "RUN"
3. Turn the key to "ON".
4. Shift the transmission into the neutral position.
5. Push the start switch if the engine does not start the neutral switch may be faulty.
With the engine still running:
6. Move the side stand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the side stand down if the engine does not stall you may have a faulty side stand switch.
After the engine has stalled:
10. Move the side stand up.
11. Keep the clutch lever pulled.
12. Push the start switch if the engine does not start you may have a faulty clutch switch.
This check is most reliable if performed with a warmed-up engine.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
neutral light wont come on when in neutral and wont start with kick stand.
No neutral light bike won start
Yamaha YZF R1P Service Manual
OEM parts for Yamaha
Yamaha YZF R1P Owner Manual

Sep 22, 2017 | 2002 Yamaha YZF-R1

1 Answer

09 yamaha r1 neutral light staying on no gear position showing unless i put down the kick stand


Hi, Jody and the usual suspects are:
1. Faulty neutral switch.
2. Grounded neutral light circuit.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
http://www.r1-forum.com/forums/161-09-14-r1-mechanical-help/348821-neutral-light-stays-while-bike-gear-clutch.html
Yamaha R1 Safety Neutral Switch
Yamaha YZF R1 1998 Service Manual
OEM parts for Yamaha
Yamaha 2009 YZF R1Z Owner Manual

Sep 19, 2013 | 2008 Yamaha YZF-R1

1 Answer

2000 r1 dies when I put it in gear


are you sure that the sidestand switch has been correctly bypassed...if it has then the problem will be the starter circuit cut-off relay

Feb 26, 2013 | 2000 Yamaha YZF-R1

1 Answer

My 2002 yamaha r1 was stolen and retrieved but ignition was beat out and now it wont start?


Hi, Heather you may need a new ignition switch for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r1-forum.com/forums/102-00-01-r1-mechanical-help/265580-how-do-you-remove-ignition-switch.html
Yamaha yzf r6 5eb ignition barrel wire replacement and keep original key
https://r1videos.files.wordpress.com/2011/04/2002-2003-yamaha-r1-service-manual.pdf
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Apr 11, 2012 | 2002 Yamaha YZF-R1

1 Answer

2002 r1 code 19 on speedo and no fire


19 is associated with the sidestand interlock

The bike must be in neutral or have the sidestand up. These interlock the starting cut-off relay.
Does your neutral light work? If it does not, that needs to be resolved, but bike should still start if the sidestand switch is made (stand is up).
If bike still does not start, then you may have problem with the diode assembly or the starting circuit cut-off relay.

Aug 16, 2009 | 2002 Yamaha YZF-R1

1 Answer

Intermittent problem with neutral light on a 2002 R1


The neutral swich is located behind the front sprocket cover
Ride Safe
Bike-Doc

Please mark this as helpful (if it has been!!)

Aug 14, 2009 | 2000 Yamaha YZF-R1

1 Answer

R1 no neutral light wont start on button bump starts fine


Hi and welcome to FixYa,

Try with the clutcj lever pulled. Check / trace the sky blue wire to the neutral switch.  Whne transmission is in neutral this wire must have continuity to ground.

Good luck and thank you for using FixYa.

Jun 20, 2009 | 2000 Yamaha YZF-R1

Not finding what you are looking for?
2000 Yamaha YZF-R1 Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

vince

Level 3 Expert

1211 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1147 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...