Question about 1990 Yamaha FZR 1000

1 Answer

How to cheack the oil

I went to do this and it was just a oil cap no stick and whats the best oil to use when i change it

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

There is a oil level window on the side of the motor when checking level have motorcycle upright and level you should have a low level line and a full line! pretty much any motorcycle grade oil avoid car oil it's not designed to work in a wet clutch enviroment also remember when changing the oil upright check level and top off oil after running engine 2 to 3 minutes (you have to fill the oil filter) wait 2 to 3 min. before checking level!

Posted on Jun 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to put oil in a space wagon 1996


http://i1.ytimg.com/vi/AzZ7PRwxNMA/maxresdefault.jpg
the black cap where it says mitsubishi diesel.
oil should be changed regularly and flushed out along with new filter, just keeping topping up is not good, change according to service manual

Jan 24, 2014 | Mitsubishi Spacewagon Cars & Trucks

2 Answers

Pontiac grand prix 3800 3.8 liter engine is leaking by the firewall at the bottom


you might want to repost this in the car and truck area as it is in the computer speaker area.

Aug 28, 2012 | 2001 Pontiac Grand Prix GTP

1 Answer

2002 x-type dipstick broken in tube


yes you can still change oil with oil drained remove dip tube extract dip stick replace tube Then repair/replace dip stick, fill as per normal

May 31, 2012 | 2002 Jaguar X-Type

2 Answers

How to do a oil change


Pull the drain plug, change the oil filter, replace the drain plug. Add oil until the dipstick reads full. Start the engine and make sure the oil light goes out. Check for leaks around the oil filter with the car running. Recheck the oil level, add as necessary. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Jan 15, 2012 | Toyota Starlet Cars & Trucks

1 Answer

Hi. I have 2007 Mercedes GL450 , Can you help me with oil change and oil filter change.Please tell me How to do it properly? The nearest Mercedes service is over 500 km. thanks alot, A


BEST TO LET DEALERSHIP CHANGE ENGINE OIL.YOU NEED A DEALERSHIP OIL FILTER.YOUR OIL FILTER INSIDE A HOUSING ON FRONT SIDE OF THE ENGINE. CHANGING YOUR OWN OIL NOT HARD.YOU NEED 9 QUARTS OF OIL LOOK INSIDE GLOVECOMPARTMENT FOR OWNERS MANUAL TO SEE WHAT TYPE OF ENGINE OIL YOU NEED TO USE AND HOW MANY QUARTS.IF YOU DONT CHECK READ MANUAL TO SEE WHAT OIL TYPE AND QUARTS YOU NEED. IF YOU BLOW OR DAMAGE THE ENGINE WARRANTY WILL NOT COVER THE ENGINE.FIRST OF ALL TO CHANGE ENGINE OIL YOU CRANK VECHICLE UP LET IDLE FEW MINUTES TO THIN OUT OIL THEN YOU TURN OFF ENGINE. YOU NEED TO RAISE VECHICLE USING THE FACTORY JACK.USE JACK STANDS. LOOK IN OWNERS FOR CAR JACK LIFTING LOCATIONS TO KEEP FROM DAMAGING ROCKER PANELS. AND PLACE A DRAIN PAN UNDER THE OIL PAN. UNDER THE VECHICLE.YOU NEED A WRENCH TO REMOVE OIL PAN DRAIN PLUG.WHEN ALL THE OLD OIL DRAIN OUT IN THE DRAIN PAN.SCREW BACK IN THE DRAIN PLUG TIGHTEN IT DONT OVER TIGHTEN STRIP THREADS.THEN YOU NEED SOCKET TYPE OIL WRENCH YOU USE WITH A 3/8 RATCHET WRENCH REMOVE OIL FILTER HOUSING.PLACE RAGS AROUND THE OIL FILTER HOUSING TO CATCH OIL SPILL. YOU WILL NEED TO GO TO THE DEALERSHIP FOR THE OIL FILTER AND FILTER HOUSING O RINGS. ONCE YOU GET NEW OIL FILTER AND O - RINGS INSTALL THEM IN THE OIL FILTER HOUSING.LOCATED OIL FILLER CAP ON VALVE COVER UNDER THE HOOD.REMOVE OIL FILLER CAP.POUR OIL IN ENGINE USING A FUNNEL.ENGINE HOLDS ABOUT 8.5 TO 9.0 QUARTS OIL. BUT LOOK IN THE OWNERS MANUAL CHECK HOW MANY QUARTS ENGINE NEED.CHECK OIL DIP STICK OIL LEVEL SHOULD BE ON THE FULL MARK ON THE ENGINE OIL DIP STICK.TO BE ON THE SAFE SIDE BUY 10 QUARTS OF OIL FOR A EXTRA.DONT OVER FILL MAKE SURE YOUR OIL LEVEL CORRECT.OIL DRAIN PLUG AND OIL FILTER TIGHT BEFORE CRANKING THE ENGINE.LOOK IN THE OWNERS MANUAL FOR OIL DIP STICK AND LOCATION.

Nov 05, 2010 | 2007 Mercedes-Benz Mercedes Benz Gl 450

1 Answer

Major tune up 2000 ford ranger 2.5


I recommend plugs, wires, distributor cap, rotor, air filter,
I suggest changing the oil and filter and the tranny filter and oil too.
Also drain and reflll differential(s) ...
Stick with motorcraft, fram, products

Jun 25, 2009 | 2000 Ford Ranger SuperCab

Not finding what you are looking for?
1990 Yamaha FZR 1000 Logo

Related Topics:

2,633 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...