Question about 2000 Harley Davidson FXST Softail Standard

1 Answer

How do you remove starter on 1986 softail custom

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Harley Davidson Master
  • 40,868 Answers

Hi Anonymous, it's pretty simple and sraight forward. Start by removing the seat and disconnecting and isolating the battery negative cable. Then remove the chrome end cap of starter, remove bracket that bolts to transmission and the battery cable on the starter and the green relay wire. WARNING!!!!! loosen and unthread completely but do not remove the two long starter thru bolts/studs. With both hands grab the starter on both ends and remove carfully, you do not want the starter to come apart, which happens all the time very easily. Good luck

Posted on Apr 18, 2015

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Mitchy123
  • 216 Answers

SOURCE: how to remove a starter from a 1999 harley

its very straight forward.. Disconnect the battery and drain the chain case and open it ....... Then take the jack shaft bolt off. hold the gear with a pliers. After that - the starter just has 2 mounting bolts, Harley says to remove the rear exhaust but I havent had to. Disconnect the electrical and pull the starter straight out

Posted on Mar 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's the electric sequence of operation when starting on my 98 softail custom?


Try these guys:

www.officialharleyparts.com

1997 1998 Harley Davidson Softail Service Repair Manual ...

https://www.scribd.com/.../1997-1998-Harley-Davidson-Softail-Service-...
Mar 27, 2010 - 1997 1998 Harley Davidson Softail Service Repair Manual Flstf ...What's trending, bestsellers, ... SERve I ELECTRIC STARTER 5 ... A clean work area at the start of each job will allow you to perform ... Proper service and repair is important for the safe, reliable operation of ..... Crankcase Torque Sequence.

No Power and Bike Won't Start Problems [Archive] - The Sportst


Dec 11, 2015 | Motorcycles

1 Answer

REMOVE STARTER SOLENOID 1995 HERITAGE SOFTAIL


The starter silinoid is connected to to starter and can't be replaced with out the starter itself when you buy a new starter it'll come with a new silinoid on it pretty expensive too

May 21, 2014 | 2000 Harley Davidson FLSTC Heritage...

1 Answer

How do you remove starter motor on 1986 Harley Davidson Softail Custom


First, DISCONNECT THE BATTERY NEGATIVE TERMINAL!!!!

Drain primary fluid, remove outer primary cover.
On the bolt holding the starter gear on, flatten the tab on the lack washer, and remove the bolt.
I use a flat blade screwdriver behind the gear, and hold it out to engage the teeth of the clutch shell to keep it from turning while undoing bolt.
If you're completely removing starter, undo the wiring going to it.
If you just need to move it a little out of the way, you might be able to leave the wires attached.
Remove two bolts holding starter to back side of inner primary cover.
Pull starter out, turning as necessary to clear.

May 07, 2014 | 2004 Suzuki GSX-R 600

1 Answer

Fuse box turn signal harley softail 2007


Hi Anonymous, remove seat and directly behind the battery is a black plastic box. The cover slides up and off revealing the starter relay and the system/fuel pump relay for you injected folks and the various assorted circuit fuses. Good luck

Aug 05, 2012 | 2007 Harley Davidson FXSTC Softail Custom

1 Answer

1994 Softail Custom. How do I remove the starter clutch?


Hi Jay168, start by disconnecting the battery negative cable then remove the rear exhaust pipe, starter end cap, all wires and cables connected to the starter and finnaly the two allen bolts that secure starter to the inner primary, remove starter to access starter clutch. Good luck and have nice day.

Jul 14, 2012 | Harley Davidson Motorcycles

1 Answer

Starter clutch removal on 1994 harley softail custom


Hi Jay168, please be aware that this question has already been asked and answered. Thank you.

Jul 14, 2012 | Harley Davidson Motorcycles

1 Answer

Need to replace starter in a 2009 harley davidson softail heritage


You will really need a service manual on this. Remove seat. Remove battery. Remove exhaust system. Drain and remove oil tank. Remove starter leads. Remove starter. Replace. Reinstall above in reverse order of disassembly.Don't forget to put oil back in.

May 04, 2012 | 2009 Harley Davidson FLSTC Heritage...

1 Answer

How to remove starter 1995 heritage softail


To remove the starter on you Softail, first disconnect the negative side of the battery.

Then drain the primary and remove any footboards, shifters, ect. so that you can get the outer primary cover off. Once the cover is off, remove the small bolt that holds the starter jackshaft on and remove the jackshaft. The jackshaft coupling may come out with the jackshaft. Mark which way the coupling goes back in as there is a snap ring on the inside that is not in the center.

Now, go to the right side of the bike and remove the exhaust system, and remove the bolts that hold the oil in. Do not take the tank out but you need to be able to lift the tank just a bit. Remove the battery cable from the starter using a 12mm wrench. There are two large bolts that hold the starter into the inner primary, remove these two bolts and unplug the small wire at the top of the solenoid and the starter will come out.

Good Luck
Steve

Feb 07, 2011 | 2000 Harley Davidson FLSTC Heritage...

1 Answer

How to remove a starter from a 1999 harley davidson softail custom


its very straight forward.. Disconnect the battery and drain the chain case and open it ....... Then take the jack shaft bolt off. hold the gear with a pliers. After that - the starter just has 2 mounting bolts, Harley says to remove the rear exhaust but I havent had to. Disconnect the electrical and pull the starter straight out

Mar 09, 2010 | Harley Davidson FXST - FXSTI Softail...

1 Answer

How do you remove the starter motor on a 2002 softail standard


Disconect battery remove wiring from starter then the two bolts on the starter this will remove the starter but not the jackshaft

Jul 22, 2009 | 2002 Harley Davidson FXST Softail Standard

Not finding what you are looking for?
2000 Harley Davidson FXST Softail Standard Logo

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...