Question about 2006 Suzuki Boulevard C90

Open Question

F1 light stays on, why - 2006 Suzuki Boulevard C90

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am a new rider bought a used 2007 gsxr and f1 light stay on what could i do and what potential problem could i have help me please


when your battery gets old, you will have a hard time starting your bike as compare to other bike that light has a switch.

Dec 24, 2013 | Motorcycles

1 Answer

When I pushed the bake oven button on, I heard a loud pop! I thought a light bulb above my range (microwave oven bulb) blew out. Then F1 came on the range screen. We turned off the power to the range...


Hello,

The F1 error code means one of two thing;either the touchpad is bad or a relay on the conrtol has shorted out. Well the loud pop and the F1,their is not doubt that a relay on the control has indeed shorted out. The fix for that is to replace teh control
PLEASE NOTE A SHORTED RELAY WILL MAKE THE HEAT ELEMENT TO STAY ON AT ALL TIMES AND THE BREAKER MUST BE LEFT TURNED OFF AT ALL TIMES UNTIL THE CONTROL HAS BEEN REPLACED OR IF LEFT ON THEIR WILL BE A VERY VERY GOOD CHANCE OF THE OVEN/HOUSE CATCHING FIRE

Aug 07, 2011 | Frigidaire Kitchen Ranges

1 Answer

MY DESK TOP TOWER RED LIGHT IS ALWAYS ON THESE DAYS. ALSO I NOTICE AFTER I START MY PC AFTER A FEW SECONDS ,THE SCREEN SHOWS STUFF WHICH INCLUDES PRESS F1 TO CONTINUE THEN AND ONLY THEN THE COMPUTER...


It seems a bad CMOS BIOS battery, normally this is a "coin" type alkaline battery located inside CPU, to replace it, you must have access to the motherboard.

Feb 15, 2011 | Computers & Internet

1 Answer

Oven will not stay heated. F1 light on.


Hello there:
on most ge models this code it can be either a (f 0) or the (f 1 ) is telling you that the the thermistor controle circuit is going bad or has failed all together. or there is a short in the erc circuit meaning the electronic controle board. ok
So i would recommend have a repairman check out the thermistor first since this is the most common thing to fail then if this passes have them test the controle board or the ecr circuit
and if the oven is still under warranty you might be able to use the warranty to get it fixed ok
Hope this is very helpful for you
Best regards MIchael

May 14, 2010 | GE JTP20 Electric Single Oven

1 Answer

Wont boot. lights 3 & 4 stay on.


Lights 3 and 4 ON indicate a problem with the RAM modules. Have you changed the configuration lately?

You will need to try the modules one at a time to try to pinpoint the faulty module. How much RAM do you have in and in what amounts?

Note: When you change RAM amounts you will get a messgae about the memory change and have to hit F1 or F2. F1 will continue to boot. F2 will take you into the BIOS.

You can use the Comment button to reply.

Thanks for using Fixya.

Nov 22, 2009 | Dell XPS 210 PC Desktop

2 Answers

My stove has started to beep random--why


WE used the broil button last night and our stove started beeping nonstop.It also say F1 three hrs of beeping we unpluged it for the night.When we turned it back on today same thing happened with the beeping and F1.hOW CAN WE FIX THIS?

Oct 28, 2009 | Frigidaire FEF336BC Electric Kitchen Range

1 Answer

Stove stays on and 30 min. later it starts beeping and F1 code


An F1 error code indicates a faulty keypad and /or ERC electronic control.

Jan 02, 2009 | Frigidaire FEF366 Electric Kitchen Range

1 Answer

Monitor displays breifly then goes to blank screen


F1 = Fuse 1
You should be able to locate a surface mount fuse at your local electronics store.

Apr 12, 2008 | NEC MultiSync LCD1830 18.1" LCD Monitor

1 Answer

Oven will not light - get F1 code


Your touch pad or control board is bad.
To determine what is bad, disconnect the ribbon strip to the board.
If you receive a code replace the board.
If no code appears, replace the touch pad.

Jan 23, 2008 | Magic Chef CGR3742 Gas Kitchen Range

Not finding what you are looking for?
2006 Suzuki Boulevard C90 Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...