Question about 2006 kawasaki KX 250 F

1 Answer

Kawasaki KX250F 2006 model coolent leak

Just baught a KX250F and rode it for the first time today, I noticed a coolant leak from a litle hole behind the water pump, on the bottom. The coolant keeps on dripping out there, and sometimes stop all together. I opened the water pump/ oil filter cover to try and locate where the leak is coming from, but the litle hole is situated behind the water pump itself on the bottom. I cant see how the coolant is supposed to be there as it doesnt look like if the hole is connected to the coolant pump itself. Any ideas what might be wrong?

The hole is not a crack or something, it looks like its supposed to be there. Even if the bike is not running, it keeps on dripping out the hole. Please help...

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,567 Answers

There are two seals on the impeller pump. Replace the seals an the leak is stopped. Put in a new cover gasket as well.

Kawasaki KX250F 2006 model coolent leak - 4efb49e.gif
Go to the site below where you can see a parts diagram for your specific bike. You will select the actual brand, year, model, etc., once you go to the site. Part numbers and prices are also shown. You can order parts from this site. In the event no price is shown on a particular part, the part is not in stock. www.babbittsonline.com/pages/parts/viewbybrandand/parts.aspx Click on the "ENGINE COVERS" tab.

A “very helpful” rating for this answer? Thanks!

Posted on Jun 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I bought 2006 kx250f without starting it when I put coolant in it leaks out my oil filter


probably not cooing out the oil filter, possibly coming out the water pump telltale hole, to let you know it needs a new water pump seal

Sep 26, 2011 | 2006 kawasaki KX 250 F

1 Answer

2006 kx250f replaced head gasket will not start,good spark,fuel and compresion,could the timing be off


Hi,,,if you have drained the carb bowl to be sure there is fuel in the carb,,put a little fuel in the sparkplug hole,,and give it a few kicks,,,,if it dosnt want to start,,then yes i would look at the timing to make sure its lined up.

good luck

Mar 25, 2011 | 2006 kawasaki KX 250 F

1 Answer

I have a 2006 KX250F that idles ruff, or surges up-down-up-down. It runs good on top. ???


This is likely to be an air leak at the carb or manifold. The leak would thin the fuel/air mixture and account for the problem. Tighten every screw and bolt in the carb / manifold area. With a little luck this may fix the problem.

Aug 02, 2010 | 2006 kawasaki KX 250 F

1 Answer

My 04 kx250f. when i ride it back fires and cut out i change the plug and get the same problem


check the mixture and check carb manifold boots , they could be leaking air. this would also change the air fuel mixture

Mar 07, 2010 | 2006 kawasaki KX 250 F

1 Answer

Water leak back of the engine


is it coolent or from your a/c

Sep 23, 2009 | 2002 Audi A4

1 Answer

2006 KX250F blowing oil out breather should I be concerned?


hi
ther is a chance that being over filled will blow out of the crank breather so drain off to the correct level if then the bike still does this then you have to high crank presure meaning the bore and piston/rings are badly worn
thanks jay

Jun 23, 2009 | 2006 kawasaki KX 250 F

1 Answer

I changed the oil and filter in my 2007 kawasaki


you probably have a leak! It is possible, (depending on what type of oil you put in)
that the oil dissolved the gasket, or removed sludge from an existing hole, causing it to open. but if you dont have any oil spots..well....thats a whole nother story.
terribly sorry!!
i hope this helps in some way!

Jun 09, 2009 | 2007 kawasaki 250 TR

1 Answer

Coolent leak Avanti model 489


this requires skill in refrigeration depending on size of leak how old is the unit and how large the leak avanti is a great company if less than five years o0ld they will replace unit get in touch with if older than them

Dec 31, 2007 | Refrigerators

Not finding what you are looking for?
2006 kawasaki KX 250 F Logo

1,443 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...