How mutch oil - 2003 Cagiva Navigator 1000

Usually you fill it untill oil comes out the fill hole and simply put the plug back in.

It appears to take 482 ml SAE 10W oil per leg. Hope this helps

You must add 5 1/2 quarts of oil to possibly 6 quarts to it this is very much required but I'm positive only 5 quarts do not over fill the motor it can blow the engine or burn the piston rings because either too much or less is added

Chain oil for e chain. 2 cycle for the saw.

I am not sure, but, I believe 4 quarts. Try a classic car website, they should have a better answer for you. I do remember that Roadmaster had an oil starvation problem and they can help with that also.

The dealers generally use 5W30 ,irrespective of you geographical location.Its also the recommend oil in your service book.I have a 330d and it uses same oil.

Gear oil: 0.7 liters, 15w50

Coolant: 1.2 liters, 50% coolant/50% water

Ignition: 12volt, Kokusan 2k-1

you may use Castrol magnatec 20w50 if it not that hot and if the climate is called, use an oil with a lower viscocity, like10w40 or 15w30 from Castrol

If you are installing a new compressor,look on the box or on a sticker on the unit to make sure it does not have oil already installed.But it calls for 8 oz.This seems a little mutch to me.I would put no more than 6oz...Good Luck!!!

Try a dry or powder lubricant in bobin case ,not to mutch ! You must try and remove plastic on right side ,to get to working parts ,do not spray on sensors!