Question about 1994 Suzuki VS 1400 Intruder

1 Answer

I have been advised to adjust my clutch on my intruder, but havent got a clue where to start, please can anyone help. Also how do you know if you have a wet or dry clutch?

Posted by on

  • dhitchings20 Jun 20, 2009

    My clutch is hydrolic not cable

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,111 Answers

The clutch lever on the handle bars has a piece that screws out on the end of the cable. screw it out counterclock wise till there is only a little slack till clutch disengages

Posted on Jun 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Suzuki VS 1400 Intruder clutch adjustment


Hi, Bob your clutch may need adjusting for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing and printing please click on the blue links below. Good luck and have a wonderful day.
Intruder 1400 Clutch Adjustment
2002 Suzuki Intruder 1400 Clutch adjustment
Suzuki Intruder VS1400 Service Manual
OEM parts for Suzuki
Suzuki VS1400 Owner Manual

Jul 21, 2017 | 2000 Suzuki VS 1400 Intruder

1 Answer

The clutch fluid reservoir went dry I refilled and bled the air out now my bike doesn't want to downshift passed third gear once I get to fourth and need to downshift at stops.


Hi, Anonymous I would recommend bleeding it again and doing a proper clutch adjustment for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Suzuki, despair not, for a mere $10 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Intruder 1400 Clutch Adjustment
Suzuki Intruder Clutch Fluid Change Instructional Video
SUZUKI VS1400 1987 2003 INTRUDER REPAIR MANUAL PARTS IMPROVED Download...
OEM parts for Suzuki
Suzuki VS1400 Owner Manual

May 23, 2016 | 1996 Suzuki VS 1400 Intruder

1 Answer

My clutch seems to slip in higher gears on my suzuki intruder but takes off from dead starts just fine. what does it sound like the problem is?


Sounds like you either need to adjust the clutch cable - there should be a little bit of play in it before it disengages the clutch - or you need a new clutch kit (plates, springs, etc). What mileage is on the bike and has the clutch ever been changed?

Jul 13, 2014 | 1992 Suzuki VS 800 Intruder

1 Answer

I have a 2002 suzuki 1400cc and I am wanting to replace the clutch becasue when it gets hot the bike won't pull its self. It has 12k miles on it and the clutch works well enough when cool, but stops...


Please dont be offended but i ride and know a clutch should last for many many more miles. Have you properly adjusted it. If im not mistaken its a mechanical clutch and its easely adjusted at the cable. Good luck

Aug 17, 2011 | 2002 Suzuki VS 1400 Intruder

1 Answer

How to adjust clutch 1998 Suzuki VL 1500 intruder LC


The clutch on this model is hydraulic and is 'self adjusting", if the clutch is slipping the plates are worn out and in need of replacement. This information comes directly from the factory service manual.

Feb 18, 2011 | 2000 Suzuki VL 1500 Intruder LC

1 Answer

Clutch wont work , havent drove bike in over a year


It happened to my Yamaha, I started the bike in gear and drove it several miles, constantly squeezing and then releasing the clutch lever. I could feel it finally catching like it should because you will notice the engine rev up when you squeeze the lever or disengaging the clutch.

Oct 21, 2010 | 1996 Suzuki VS 1400 Intruder

1 Answer

Can't get the clutch on a suzuki 800 intruder to hold pressure


Oil should be 10W40 SF or SG grade. Anything else will cause the clutch to slip. There must be freeplay on the clutch cable (0.4-0.6in). Adjust handle bar clutch lever screw all the way out then adjust at gearbox end and revert to handle bar adjustment for fine adjustments. If this does not solve the problem take the clutch apart and measure driven plate thickness (3.12in minimum for the 1st plate and 2.62in minimum for the others)
Measure clutch spring free length. There are 2 sets (4 springs each). 0.97in minimum and 0.92in minimum respectively.
A slipping clutch is caused by incorrect friction, that is incorrect oil or insufficient pressure. Pressure is supplied by the springs on the discs and driven plates.
If the discs, driven plates or bucket is worn it will cause slippage.
If you pull in the clutch and it disengages but starts to re- engage after a short period you will need to replace the clutch master cylinder seals.

Sep 22, 2010 | 1994 Suzuki VS 800 Intruder

1 Answer

Suzuki 125 intruder clutch adjustment


You'll need to adjust this by the adjuster right on the lever assembly itself.

Apr 11, 2010 | 2003 Suzuki VL 125 Intruder LC

1 Answer

94 vs intruder dead starter switch


try adjusting /cleaning ,clutch switch

Apr 14, 2009 | 1994 Suzuki VS 800 Intruder

1 Answer

I have an MGF 1.8 i havent had it more than a week and the clutch pedal has gone stiff and refuse to release making clutch slip or even not engage at all can anyone please help thankyou


One of the improvement for Lotus Elise was the power (hydraulic) 5 speed manual clutch (something like power brakes) to make car to provide the faster responce. Thats probably wthat you have where
You might need to adjust it, replace the fluid or in a worsest scenatio to rebuild/replace the clutch.
Good Luck

Dec 07, 2008 | Lotus Elise Cars & Trucks

Not finding what you are looking for?
1994 Suzuki VS 1400 Intruder Logo

441 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...