Question about 1993 Harley Davidson FLSTF Fat boy

1 Answer

My left and right turn signals light up while riding and not pressing the switches

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Harley Davidson Master
  • 39,960 Answers

Hi Anonymous, I would definitely start with the switches, get out your test lite and check for continuity and proper function. Good luck

Posted on Apr 16, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: 01 Softail Deuce left turn signal comes on, will not go off

I'm new to this site but actually has fielded a question about a Triumph motorcycle I'm worrking on!

I have an '03 Anniversary Deuce and I ran into (not the exact) but similar problem. My bike has the bars internally wired from the grips all the way through the top triple tree. Somehow over time the turn signal wire got shorted "internally". You might want to just unbolt the turn signal switch from the bars to see if the wire got pinched up high. If not...move the wires around to see if that helps. If it does...ultimately you should re-wire the connections. Just my experience...good luck!

Posted on Feb 10, 2009

polarcycle
  • 1392 Answers

SOURCE: turn signals not working properly

Sounds like you have a short somewhere, or the wiring is backwards. Start looking at all your wiring.

Posted on Jun 09, 2009

  • 4 Answers

SOURCE: left side turn signals ( front & Back) won't work

Check the bulb for the actual indicator light on the dash

Posted on Jul 16, 2009

  • 8 Answers

SOURCE: 2007 harley softail turn signals left side stoped

More than likely a broken wire you will have to trace

Posted on Sep 20, 2009

  • 1 Answer

SOURCE: right signal not flashing signals dont light up for night

2005 sportster custom will only run with choke on

Posted on Mar 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 Park Avenue my turn signals do not work my flashers work


gmlogoflat.gifService Information
2002 Buick Park Avenue ' Park Avenue (VIN C) Service Manual ' Body and Accessories ' Lighting Systems ' Description and Operation ' Document ID: 643323


Turn Signal/Cornering Lamps
The HZDT/SIG fuse in the fuse block - underhood - left supplies battery positive voltage to the turn signal/hazard flasher module and have ground at G202. The turn signal lamps may only be activated with the ignition switch in the ON or ACCY position. The T/SIG fuse in the fuse block - underhood - left supplies battery positive voltage to the turn signal switch. When the turn signal switch is placed in either the left or right position, current flow is from the turn signal switch assembly to the turn signal/hazard flasher module. The turn signal/hazard flasher module then sends an on-off voltage signal to either the left or right turn signals and their instrument cluster (IPC) indicator. When the hazard switch is pressed, all the turn signal lamps will flash including both IPC turn signal indicators. The left turn signals have ground at G106, G400 and at G402. The right turn signals have ground at G105 and G400. The turn signal switch supplies battery positive voltage to the cornering lamps, the left cornering lamp has ground at G105 and the right cornering lamp has ground at G106.
+snpvvsvwho06+5aqhepgaaaabjru5erkjggg==










2002 Buick Park Avenue ' Park Avenue (VIN C) Service Manual ' Body and Accessories ' Lighting Systems ' Description and Operation ' Document ID: 643323

May 10, 2016 | Cars & Trucks

1 Answer

2002 hd 1400 has a #2 code showing up will not clear


If you've got that Engine light coming On for 4 seconds, Off 4 seconds then On 8 seconds then out, its historic. (there WAS a problem that has now cleared)
If its On 4, Off 4 then remains On its a 'current' code.

I never heard of a #2 code.....they are read as a two digit code.

Here's one method some use to clear all codes:

Disarm alarm if so equipped.
Run/Off switch to OFF
Ignition Key: ON,OFF,ON,OFF,ON (and leave ON)
Press LEFT turn signal switch TWICE. Wait for 1 or 2 flashes..
Press RIGHT turn signal switch ONCE => turn signal will flash 1 time
Press RIGHT turn signal switch ONCE => turn signal flashes 2 times
Press RIGHT turn Signal switch ONCE => turn signals flash 3 times
Press LEFT turn signal switch ONCE. TROUBLE CODES WILL NOW BE DISPLAYED
TO CLEAR ANY CODES,,,=> PRESS & HOLD LEFT signal switch for 5 seconds. => turn
signal will now flash twice to confirm memory is clear.
Turn ignition OFF.

Sep 28, 2014 | Harley Davidson FLHX Street Glide...

1 Answer

My harley wont start


Key fob MUST be present near bike!
1. Select 5 digit code ( each digit being a 1 thru 9) and record it on the wallet card in the owners manual.
2. With an assigned FOB present, turn IGN key ON - OFF - ON - OFF - ON
3. Press Left turn signal switch 3 times.
4. Press Right turn signal switch one time and release.
*Turn signals will flash 3 times. Current PIN will appear in the odometer. The first digit will be flashing.
TO ENTER NEW PIN:
5. Enter first digit (a) of the new PIN by pressing left turn signal (a) times.
6. Press right turn signal 1 time and release.
*The new digit (a) will replace the current in the odometer window.
7. Enter second digit (b) of the new PIN by pressing left turn signal switch (b) times.
8. Press right turn signal 1 time and release.
*The new digit will replace the current in odometer window.
9. Enter the third digit (c) of the new PIN by pressing left turn signal (c) times.
10. Press the right turn switch 1 time and release.
*The new digit (c) will replace the current in the odometer window.
11. Enter forth digit (d) of the new PIN by pressing left turn signal switch (d) times.
12. Press the right turn switch 1 time and release.
13. Enter the fifth digit (e) of the new PIN by pressing left turn signal (e) times.
*The new digit (e) will replace the current in the odometer window.
14. Press the right turn switch 1 time and release.
15. Before the module rearms, turn ignition key to OFF.
* The odometer will return to mileage display.
**Turning the ignition to OFF stores the new pin in the module.



Using the Security Alarm PIN Override to Start Your Harley Davidson

1. Turn the IGN key to IGNITION and immediately hold both turn signal switches until 5 dashes appear in the odometer window.
2. Enter the first digit of your PIN (a) by pressing the left turn signal switch (a) times.
3. Press the right turn signal switch 1 time to move to the next digit.
4. Enter the second digit of your PIN (b) by pressing the left turn signal switch (b) times.
5. Press the right turn signal switch 1 time to move to the next digit.
6. Enter the third digit of your PIN (c) by pressing the left turn signal switch (c) times.
7. Press the right turn signal switch 1 time to move to the next digit.
8. Enter the forth digit of your PIN (d) by pressing the left turn signal switch (d) times.
9. Press the right turn signal switch 1 time to move to the next digit.
10. Enter the fifth digit of your PIN (e) by pressing the left turn signal switch (e) times.
11. Press the right turn signal switch 1 time to move to the next digit.
12. Press the right turn signal switch one time and the security system alarm is turned off.

Aug 10, 2014 | 2011 Harley Davidson FLSTC Heritage...

1 Answer

How do you access trouble codes on 2003 harley davidson deuce?


With the newer HD Security Systems using proximity FOBs where the key FOB needs to be close to the bike to start, this is now more important then ever. If the battery in your FOB dies and you have not set your Harley Alram Override PIN Code, you will not be starting your bike. It is just as important for those with oler Harley Davidsons with the push button alarm FOB. It you set your alarm and the battery dies before you return to your bike, again you will not be starting the bike.

If you haven't set the PIN over ride for your HD security alarm system...do it now! Here's how you do it...

(To view how to deactivate the security system with the manual PIN code, see below.
)



Setting or Changing Your Security System Alarm Override PIN

Button less fobs (Smart FOB)


1. Select 5 digit code ( each digit being a 1 thru 9) and record it on the wallet card in the owners manual.

2. With an assigned FOB present, turn IGN key ON - OFF - ON - OFF - ON

3. Press Left turn signal switch 3 times.

4. Press Right turn signal switch one time and release.
*Turn signals will flash 3 times. Current PIN will appear in the odometer. The first digit will be flashing.

5. Enter first digit (a) of the new PIN by pressing left turn signal (a) times.

6. Press right turn signal 1 time and release.
*The new digit (a) will replace the current in the odometer window.

7. Enter second digit (b) of the new PIN by pressing left turn signal switch (b) times.

8. Press right turn signal 1 time and release.
*The new digit will replace the current in odometer window.

9. Enter the third digit (c) of the new PIN by pressing left turn signal (c) times.

10. Press the right turn switch 1 time and release.
*The new digit (c) will replace the current in the odometer window.

11. Enter forth digit (d) of the new PIN by pressing left turn signal switch (d) times.

12. Press the right turn switch 1 time and release.

13. Enter the fifth digit (e) of the new PIN by pressing left turn signal (e) times.
*The new digit (e) will replace the current in the odometer window.

14. Press the right turn switch 1 time and release.

15. Before the module rearms, turn ignition key to OFF.
* The odometer will return to mileage display.
**Turning the ignition to OFF stores the new pin in the module.


Push Button fobs

1. Select 5 digit code ( each digit being a 1 thru 9) and record it on the wallet card in the owners manual.

2. With an assigned FOB present, turn IGN key ON - OFF - ON - OFF - ON

3. Press Left turn signal switch 3 times.

4. Press button on fob twice
Current PIN will appear in the odometer. The first digit will be flashing.

5. Enter first digit of the new PIN by pressing left turn signal until the desired number appears.
Press button on fob twice to enter number.

6. Enter second digit of the new PIN by pressing left turn signal until the desired number appears.
Press button on fob twice to enter number.

7. Enter third digit of the new PIN by pressing left turn signal until the desired number appears.
Press button on fob twice to enter number.

8. Enter forth digit of the new PIN by pressing left turn signal until the desired number appears.
Press button on fob twice to enter number.

9. Enter fifth digit of the new PIN by pressing left turn signal until the desired number appears.
Press button on fob twice to enter number.

Turning the ignition to OFF stores the new security PIN.



Using the Security Alarm PIN Override to Start Your Harley Davidson

1. Turn the IGN key to IGNITION and immediately hold both turn signal switches until 5 dashes appear in the odometer window.

2. Enter the first digit of your PIN (a) by pressing the left turn signal switch (a) times.

3. Press the right turn signal switch 1 time to move to the next digit.

4. Enter the second digit of your PIN (b) by pressing the left turn signal switch (b) times.

5. Press the right turn signal switch 1 time to move to the next digit.

6. Enter the third digit of your PIN (c) by pressing the left turn signal switch (c) times.

7. Press the right turn signal switch 1 time to move to the next digit.

8. Enter the forth digit of your PIN (d) by pressing the left turn signal switch (d) times.

9. Press the right turn signal switch 1 time to move to the next digit.

10. Enter the fifth digit of your PIN (e) by pressing the left turn signal switch (e) times.

11. Press the right turn signal switch 1 time to move to the next digit.

12. Press the right turn signal switch one time and the security system alarm is turned off.


May 20, 2014 | 2003 Harley Davidson FXSTDI Softail Deuce

1 Answer

Turn off alarm without key fob


First off, you need to know the PIN.
Setting the PIN is as follows:

Think of a five-digit PIN, and write it down. Think of this set of numbers as a password for starting your bike and disabling the alarm during those times when you don't have your fob.
Turn the ignition key on, then off, then on, then off, then on again. Then press the left turn-signal switch twice. Press the right turn-signal switch once, and the current PIN should appear in your odometer.
Be sure the first digit of the PIN is flashing. Enter the first digit of your new PIN by pressing the left turn signal to cycle through the numbers.
Press the right turn signal once to switch to the second digit, and select the correct number with the left turn signal. Repeat this process until your new PIN is entered correctly.
Press the right turn signal once, then turn the ignition key off to save the PIN you selected.

Now, how to disable:

Let's assume for simplicity that your code is set at 31313 and you wish to use the manual disarm of the security system using the directional switches as if you lost your fob and cannot disarm the system.

Your security system will disarm the bike and it cannot be started without deactivating the system first.

If you are unsure of what the manual code is refer to the top of this page or check with your dealer and set one if it has not been set by them.

Again this is based on your code being 31313 just to make it easier to understand.

1. Turn the ignition to Accessory.

2. Press both turn signals. (security light should flash rapidly)

3. Press left turn signal button 3 times (the 1st "3" of the PIN). Press right turn signal button 1 time (to "set" the code number).

4. Press left turn signal button 1 time (2nd number of PIN). Press right turn signal button 1 time.

5. Press left turn signal button 3 times. Press right turn signal button 1 time.

6. Press left turn signal button 1 time. Press right turn signal button 1 time.

7. Press left turn signal button 3 times. Press right turn signal button 1 time.

Security light stops flashing and security system is disarmed.

If you've changed the number, use your new number instead of 31313.

Dec 25, 2013 | Harley Davidson Motorcycles

1 Answer

How do i reset a pin number on a harley


With the fob present, turn IGN switch:
IGNITION-OFF-IGNITION-OFF-IGNITION
Press LEFT turn signal switch 3 TIMES
Press RIGHT turn signal switch 1 TIME and release
Turn signals will flash 3 times. Current PIN will appear in odometer. The first digit will be flashing.

If changing PIN, enter first digit (a) of new PIN by pressing LEFT signal switch (a) time(s) i.e., for the number 1, press one time. for the number 5, press 5 times.

Press RIGHT signal switch 1 TIME and release.
the new digit (a) will replace the current in odometer window.

Enter second digit (b) with LEFT signal switch.

Repeat until PIN is set.

Apr 16, 2013 | 2009 Harley Davidson FXD Dyna Super Glide

1 Answer

My immobiliser wont let me start the bike


This may help you ... http://www.youtube.com/watch?v=RTy_JKI9cQ0 ... probably not.

Resetting your security system depends on which system you have. To do any of them, you must have the fob. If you don't have the fob, only Harley can clear. Be prepared to prove ownership when you arrive.

To reset the code with a TSSM equipped bike, you will:
1) Set your kill switch to off
2) Quickly turn the ignition switch on, off, on, off, on
3) Immediately press and let go of the left turn signal switch twice (press, let go, press, let go)
4) Press and let go of your fob button twice (press fairly hard, it's designed to resist being pressed by keys and what not in your pocket)
5) Current PIN number will be displayed on odometer
6) Change the PIN by pressing the left signal until the desired number is reached
7) Press the fob button twice to cycle to the next number and repeat step 7
8) Press and let go the right signal and turn ignition off when 5 digit PIN is satisfactory
NOTE: Steps 2 through 4 must be completed in quick succession of each other.

Now you can have the bike armed, and disarm with the PIN (example PIN will be 25522 in the following steps):
1) Ignition switch to Accessories
2) Immediately press both turn signals at the same time (red key light on you speedometer will flash rapidly if done right)
3) Press and let go the left signal 2 times
4) Press and let go the right signal once
5) Press and let go the left signal 5 times
6) Press and let go the right signal once
7) Repeat for each of the last three numbers of the PIN (left 5 times, right once, left 2 times, right once, left 2 times, right once)
8) Red key on speedo will stop blinking if done right (security has been disarmed)
NOTE: Steps 2 through 7 must be completed in quick succession of each other.



To reset the code with a HFSM equipped bike, you will:
1) Have your key fob near the bike
2) Set your kill switch to off
3) Quickly turn the ignition switch on, off, on, off, on
4) Immediately press and let go of the left turn signal switch twice (press, let go, press, let go)
5) Press and let go the right signal once
6) Current PIN number will be displayed on odometer
7) Change the PIN by pressing the left signal until the desired number is reached
8) Press the right signal to cycle to the next number and repeat step 7
9) Turn ignition off when 5 digit PIN is satisfactory
NOTE: Steps 3 through 5 must be completed in quick succession of each other.

Now you can have the bike armed, and disarm with the PIN (example PIN will be 25522 in the following steps):
1) Ignition switch to on
2) Immediately press both turn signals at the same time (red key light on you speedometer will flash rapidly if done right)
3) Press and let go the left signal 2 times
4) Press and let go the right signal once
5) Press and let go the left signal 5 times
6) Press and let go the right signal once
7) Repeat for each of the last three numbers of the PIN (left 5 times, right once, left 2 times, right once, left 2 times, right once)
8) Red key on speedo will stop blinking if done right (security has been disarmed)
NOTE: Steps 2 through 7 must be completed in quick succession of each other

Feb 24, 2013 | 2010 Harley Davidson FXDF Fat Bob

1 Answer

Recently my signal lights quit working properly. when button pressed, emergency lights front and back would come on. no left/right signal or brake lights would come on. replaced the tsm. problems...


Hi Ruben, always check fuses and bulbs first, you could have a faulty turn signal module or a bad turn signal button/switch, remove it from the switch housing and check for continuity, check your wiring and connections from the turn signal switch to the turn signal module with a testlite. Make sure all wires are not worn or pinched and connector pins are not corroded, broken, or loose. For a free wiring diagram please visit the website below:
Harley Davidson Wiring Diagrams and Schematics

Apr 01, 2012 | 2001 Harley Davidson FXDWG Dyna Wide Glide

1 Answer

My husband just bought a 2009 street glide with the security system installed. When we picked it up the dealer showed us how to start it without the key. We know the code, but cannot remember how he told...


First the information should be in your owners manual but here goes:

1. Turn Run switch to off
2. Turn Ignition Switch to ACC
3. Hold both turn switches until comfirmation (lights flash)
4. Enter first digit code by pressing left turn signal that many times (ex, if first number is 5, press 5 times) then push the RIGHT turn signal 1 time to accept.
5. Press LEFT signal however many times for second number, press Right signal 1 time to accept
6. Press LEFT signal however many times for third number, press Right signal 1 time to accept
7. Press LEFT signal however many times for fourth number, press Right signal 1 time to accept
8. Press LEFT signal however many times for fifth number, press Right signal 1 time to accept

System should now be disarmed and ready to start

Good luck

Jul 20, 2011 | Harley Davidson FLHX Street Glide...

1 Answer

01 Softail Deuce left turn signal comes on, will not go off


I'm new to this site but actually has fielded a question about a Triumph motorcycle I'm worrking on!

I have an '03 Anniversary Deuce and I ran into (not the exact) but similar problem. My bike has the bars internally wired from the grips all the way through the top triple tree. Somehow over time the turn signal wire got shorted "internally". You might want to just unbolt the turn signal switch from the bars to see if the wire got pinched up high. If not...move the wires around to see if that helps. If it does...ultimately you should re-wire the connections. Just my experience...good luck!

Feb 10, 2009 | 2000 Harley Davidson FXSTD Softail Duece

Not finding what you are looking for?
1993 Harley Davidson FLSTF Fat boy Logo

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...