Question about 1993 Yamaha YZF 750 R
Posted by Anonymous on
Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
fork oil change help
94 YZF 750R fork oil quantity
Yamaha YZF750R Service Manual
OEM parts for Yamaha
Posted on Nov 21, 2016
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
it sounds like your fork seal has failed,it wont affect your brakes but will make your front suspension feel a wee bit "soggy"and will affect your handling,i would suggest getting the seal replaced as evetually the oil from the faulty seal will contaminate your brake pads that will affect your braking performance,replacing the seal,sooner rather than later ,would be a wise move..hope this helps...cheers
Posted on Jul 31, 2009
YZF600R is a carbureted model. OIL: The oil sight glass is a round window, low on the right side. Very hard to try to see when astride the bike, even if you use a mirror on an extension rod. Have a friend hold the bike level,perhaps, while you check. Oil should be sighted after the bike has been sitting for a time after riding. I suggest using a good 10W-40 regular motorcycle oil (Least expensive around here in Boston is to buy Kawasaki by the gallon at Riverside) I found the pesky 1st-to-2nd shift to be more direct with this oil than with synthetic. I had plenty of opportunity to compare the two types. GAS: No reserve, but as noted, there is a low fuel light, in the row of lights that includes the neutral light and the high beam indicator. You ought to be getting over 50 m.p.g., so you can estimate your 'range' from that. I usually fill up again around the 180 mile period. I think I've seen the low fuel light once in 6 years of ownership. OH: I suggest you treat the gas, on a regular basis, with 'marine' Stabil, not the regular stuff. I have had a 'gummy' Yamaha Virago 250 to care for, that I thought would never clear its fuel problems. Last winter ('08-'09) stored it with the marine Stabil in the tank and run for a while to get it into the carbs also. Within a few minutes of running it this spring-actually a couple weeks ago- it smoothed out and has run fine since. I believe this HAS to be as a result of the treatment of the fuel (run through the carbs before the winter storage) with this special Stabil. It was recommended by Carlo at Riverside- I'll have to remember to thank him for the advice. N.B. I always change the fuel (siphon it out, put that Stabil'ed but 'old' stuff into my car tank, refill the bikes with fresh 93 octane) each Spring.
Posted on Aug 17, 2009
SOURCE: 2001 yzf426 front fork leak
Each fork has an outer dust seal, and an inner seal inside of that. Dirt gets between the seal lip and the fork slider and causes the oil to escape. The fix is to have them (Both sides) replaced. You need a fork seal driver tool (Size specific for the size of the fork) and something to measure out the oil amount. It's not an easy job, if you have never done it. Also... if the oil has never been changed, it's due.
Posted on Aug 20, 2009
Tips for a great answer:
Feb 09, 2015 | Triumph Trident 750 Motorcycles
Oct 02, 2014 | Motorcycles
Sep 29, 2014 | Yamaha Motorcycles
Jul 12, 2014 | 2004 Harley Davidson FXD - FXDI Dyna Super...
Feb 04, 2014 | 1997 Yamaha YZF Thunder ace 1000 R
Apr 03, 2013 | 2005 Yamaha yZ 85
Sep 19, 2012 | 2005 Honda VT 750 DC Shadow Spirit
Jul 04, 2012 | 2006 Yamaha YZF-R6
Apr 26, 2012 | 2002 Honda VT 750 DC Shadow Spirit
70 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: