Question about 1987 Honda GL 1200 Aspencade Gold Wing

1 Answer

Gl1200 stored for four years now the clutch is not ingaging.

When I first started it up the bike rear brake was lockes and bike was hard to move repared brake problem. then went to go down the drive and had to let cluch out almost all the way to get the bike to move. and now the cluch is not locking up to make the bike movehardly at all only moved the bike about 40 ft during this operation.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 143 Answers

I am afraid the engine and transmission will have to be separated and the splines on the clutch and transmission input shaft cleaned to remove rust and then re-lubed.

Posted on Jun 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Adjusted the clutch still put in gear and bike takes off


Has the bike just come out of storage? Often they can get sticky. What I do I can't recommend to others, I start the bike in gear and while rolling pull in the clutch and mash the rear brake hard until it frees. The alternative is pulling the clutch plates, if they're not worn or damaged, clean them up with brake cleaner, re install them in reverse order. Not a hard job, just pay attention to how they come out, put them back as they came out.

May 21, 2015 | Motorcycles

1 Answer

Gsx750 clutch cable


See if you can push the bike with it in gear and the clutch lever pulled in. If the clutch is stuck, push start the bike, jump on, get to about 10 mph, pull in the clutch lever and hit the rear brake hard. This will usually break a stuck clutch loose.

Mar 21, 2014 | 1988 Suzuki GSX 750 ES

1 Answer

My mortorcycle will roll as if in neutral in all gears while it is not running must block tires when i get off 1985 honda goldwing gl1200 trike


This is obviously a clutch issue. IIRC, Goldwing has a hydraulic clutch, so I'd start by bleeding it (especially if the oil in it is older than two years). Other than that, you'll need a mechanic to check it out.

Nov 09, 2013 | Honda Motorcycles

1 Answer

1986 Honda GL 1200 Aspencade Gold Wing loud clank then lost forward propulsion


Hi, Hugh you have a drive train issue and the real answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Hard shifting with clunk 86 GL1200i GL1200 Information Questions...
Clunk in first gear GL1200
Honda GL1200D Shop Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda GL1200 1986 Owner Manual

Jul 16, 2012 | 1986 Honda GL 1200 Aspencade Gold Wing

1 Answer

Hey I have a 1985 rm 250 and its been siting for about 3 months with all fuilds removed ....I have cleaned the carb and other areas on the bike ......but when I reset up the cluch it is stuck ingaged and...


hi.
a clutch sticking on after storage is not unusual. i find that if i put the bike in 2nd gear, pull the clutch lever in and rock the bike back and forth quite hard a few times that the clutch will free off. just make sure that the ingintion is turned off, or the lead is removed from the spark plug, to make sure that the bike cannot start. this has never failed me yet, and some of the bikes i have done this with were stored for quite a number of years. hope this helps

Aug 16, 2011 | 2008 Suzuki RM250

1 Answer

With the motor off and 1st gear ingaged when you


This may be off the wall ... clutches do wear and need adjustment ... your bike is almost 30 years old ... has it been serviced recently? Might be worth a trip to the Yamaha Shop.

May 16, 2010 | 1982 Yamaha XJ 650

1 Answer

1989 GOLDWING MOTOR CYCLE WILL NOT SHIFT. HAS BEEN SITTIN IN GARAGE FOR TWO YEARS ON CENTER STAND. IT STARTS UP FINE WHEN BUT IN GEAR IT LUNGES FORWARD AND STALLS


Sounds like the clutch is sticking. You may be able to free it off. Bike on centre stand, rear wheel off the ground, run engine, front brake hard on, pull in clutch and put in gear. Apply rear brake. May work,may not. Be careful to keep rear wheel off the ground.

Dec 02, 2009 | 1989 Honda GL 1500 Gold Wing

1 Answer

Clutch seems to be seized because bike has been sitting for years


Is the clutch lever sized or is the plates sized?
Usually the plates inside sizes, all you have to do is select gear 2 or 3 without starting the bike's engine,operate the clutch lever and push the bike,it should release, the rear wheel should now rotate freely with clutch lever in operation and in gear.
Hope this helps!

Nov 28, 2009 | Yamaha YZ 250 Motorcycles

Not finding what you are looking for?
1987 Honda GL 1200 Aspencade Gold Wing Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...