Question about Harley Davidson FLHT Electra Glide Standard Motorcycles
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Not too hard - Undo the two bolts on the caliper and then seperate the caliper and pull the old ones out. Insert the new ones and put the bolts back in to hold the caliper back together and then install them back on the bike with the two retaining bolts. Use a bit of lock tight (Blue) on the threads. Warning do not let anyone apply pressure on the brakes while you have them off the bike or you will have a mess and/or a problem.
Posted on Jun 21, 2009
camplate check valve sticking,good time for an upgrade SEcamplate,hydraulic camchain tensioners,high volume oil pump,comes as complete kit for about $420. add another $150 for adjustable pushrods and never worry about it again,or replace the existing component youd save maybe $180 bucks but youll be back
thats why they changed the camplate and tensioners in 07, I just did the complete conversion on an 02 heritage it costed with labor about 1100 in your case your looking at 7 to 800 dollars just to get you going for another 30 or 40,000 miles or less and then do it again Im for a 1 time fix myself
Posted on Apr 26, 2010
To adjust the clutch, first find the clutch cable adjuster. It should be somewhere along the downtube of the frame in front of the engine. Slide the rubber bellows cover either up or down to expose the adjuster. Loosen the lock nut and turn the adjuster inwards shortening the cable as much as possible.
Remove the Derby cover from the primary cover. In the middle of the clutch assembly is an adjuster bolt and a lock nut. Loosen the lock nut and turn the adjust inwards until you feel a resistance. Don't not force the adjuster, go inwards until you feel the resistance of the throwout bearing on the other side. Try it a couple of times until you get the feel of it. Go inwards until you feel the resistance and then come back out 1/2 to 1 full turn. Lock the lock nut down and replace the derby cover.
Then go back to the cable aduster and and adjust the cable adjuster out until you have about an 1/8" freeplay at the lever. Lock that lock nut down and reposition the bellows cover.
Posted on Jul 21, 2010
The oil pan is on the bottom of the transmission. Look under the transmission and you'll see two drain plugs. The one closest to the front left corner is the engine oil drain. The one closest to the center is the transmission drain.
Posted on Jul 25, 2010
Testimonial: "Thank you so much for your expert help. I am a new Harley owner and just needed a quick help to my problem. Thanks again. David Rieger"
Tips for a great answer:
May 25, 2014 | 2004 Harley Davidson FLHTC - FLHTCI...
Mar 25, 2014 | 2005 Harley Davidson FLHTCUI Electra Glide...
Aug 01, 2013 | 2005 Harley Davidson FLHTCUI Electra Glide...
Mar 29, 2013 | 2002 Harley Davidson FLHTCUI Electra Glide...
Feb 26, 2013 | 2001 Harley Davidson FLHTCUI Electra Glide...
Jun 13, 2012 | 2004 Harley Davidson FLHTCUI Electra Glide...
May 08, 2012 | 2001 Harley Davidson FLHTCUI Electra Glide...
Jun 26, 2010 | 2004 Harley Davidson FLHTCUI Electra Glide...
Jun 28, 2009 | 2002 Harley Davidson FLHTCUI Electra Glide...
40 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: