Question about 2004 Suzuki Intruder LC 1500
What is the capacity of fork oil for a 1998 suzuki intruder 1500 LC
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
from the service manual pour oil in until 88ml from the top, but make sure form is fully compressed before doing so
Posted on Jun 20, 2009
Intruder carbs are notorious for this issue. What you have going on is that the needle seat has become worn out. The problem is, that this carb was designed with pressed in needle seats that cannot be removed. You will need to search online for an intruder carb rebuilder that can press in the seats for you, as well as change the seals, replace the needle, check the diapragm and jets, and replace/clean the floats. OR, you can try to find new carbs online from a wrecked or used Intruder 1500 VL.
Posted on Jun 11, 2010
Hello Dale, this is an easy job on your bike. Use a flat head screw driver and remove the brake pad cover...it will pop off.
Remove the hairpin type clips off of the ends of the brake pad pins.... Use pliers & pull the brake pad pins out from the front of the rear brake caliper....Clean the rear brake caliper's piston with brake cleaner. Use a rag and wipe it clean...Reinsert the old brake pads into the caliper. Place a pry bar between the brake pads, then push the inner piston into the caliper body, this will allow room to install new pads.... Remove the old brake pads...Coat the brake pad pins and the new brake pads metal back plates with high-temperature grease.
Slip the new brake pads into the rear brake caliper, then push the brake pad pins halfway into the caliper. Slip the spring clips into place between the brake pads and the brake pad pins. Push the brake pad pins completely through the rear brake caliper. Push the hairpin clips back into the brake pad pin tips. Snap the brake pad cover onto the top of the rear brake caliper....
Pump the rear brake pedal until the pedal feels firm, indicating that the brake pads have closed around the brake rotor...No bleeding will be needed because the system was never opened - That's all there is to it...i hope this information is helpful & good luck with your bike.
Posted on Nov 23, 2011
Tips for a great answer:
Jul 05, 2016 | 2004 Suzuki Intruder LC 1500
Apr 03, 2016 | Goes Motorcycles
May 30, 2014 | 2003 Suzuki VL 1500 Intruder LC
Aug 26, 2010 | 1994 Suzuki VS 800 Intruder
Jun 07, 2010 | 2001 Suzuki VL 1500 Intruder LC
Apr 11, 2010 | 2002 Suzuki VL 1500 Intruder LC
Jun 28, 2009 | 2001 Suzuki VL 1500 Intruder LC
May 05, 2009 | 2003 Suzuki VL 125 Intruder LC
Apr 04, 2009 | 2002 Suzuki VL 1500 Intruder LC
71 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: