Question about 2001 Suzuki VZ 800 Marauder
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Normally no. If the fork seals are leaking when you ratchet the front down on the trailer your seals were bad prior to that. If you are talking about the straps being wrapped around the forks the only thing that they would contact would be the dust covers. The fork seals are actually down inside the fork about 1/4 inch. Have a good day
Posted on Aug 12, 2009
• Place the front fork vertically without spring.
• Compress it fully.
• Pour specified front fork oil up to the top level of the outer
Capacity (each leg): 490 ml (16.6/17.3 US/lmp oz)
99000-99044-L01: SUZUKI FORK OIL L01
or an equivalent fork oil
• Move the inner rod slowly with the special tool ten times and
more until no more bubbles come out from the oil.
09940-52841: Inner rod holder
Refill front fork oil up to the top of the outer tube so that bubbles
are visible while bleeding air.
• Refill specified front fork oil up to the top level of the outer
tube again. Move the outer tube up and down several strokes
until no more bubbles come out from the oil.
• Keep the front fork vertically and wait 5 – 6 minutes.
* Always keep oil level over the cartridge top end, or air may
enter the cartridge during this procedure.
* Take extreme care so as to pump out air completely.
• Hold the front fork vertically and adjust fork oil level with the
When adjusting the fork oil level, compress the outer tube fully
without the fork spring.
Fork oil level: 153 mm (6.02 in)
09943-74111: Front fork oil level gauge
Posted on Dec 20, 2009
SOURCE: spring can't be replace
if springs are inside the legs remove large nut and springs slide out,if external,remove large nuts,undo pinch bolts at bottom yoke,pull tubes out of yokes
Posted on Jul 03, 2010
The recommended weight is Suzuki SAE 10W fork oil. The amount for the forks is 386ml or 13.5 ounces per side.
Posted on Feb 19, 2011
Testimonial: "thanks so much . 5 stars for you."
This should be the location of the fuse box
Remove the left side cover, look near the middle and you will see a black rectangular box mounted sideways. It has a Phillips head screw in the middle. On the end of the box that faces the front of the bike it should say FUSE (it may have dust over the words). Remove the screw and pop the plastic box off, the fuses are under there - 4 or 5 of them.
Posted on Oct 28, 2011
Tips for a great answer:
Jun 19, 2015 | 2003 Suzuki VZ 800 Marauder
May 28, 2014 | 2001 Suzuki VZ 800 Marauder
May 03, 2010 | 1997 Suzuki VZ 800 Marauder
Apr 07, 2010 | 2001 Suzuki VZ 800 Marauder
Dec 18, 2009 | 1998 Suzuki VZ 800 Marauder
Aug 12, 2009 | 1997 Suzuki VZ 800 Marauder
Jul 25, 2009 | 1998 Suzuki VZ 800 Marauder
May 15, 2009 | 2001 Suzuki VZ 800 Marauder
Mar 15, 2009 | 2003 Suzuki VZ 800 Marauder
69 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: