Question about 2004 Harley Davidson VRSCB V-Rod

1 Answer

I just bought a billet headlamp shell and I was wondering the instuctions say to use my original headlamp but it doesn't fit what do I do????

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,565 Answers

To state the obvious, you need to find a headlamp that will fit your new billet shell. Sounds simple but it may not be especially if you live in a country other than the United States.
Headlamps and other vehicle lamp must conform to your country's regulations. In the U.S., our lights have to meet the Department of Transportation (DOT) specifications. In other countries, it's their "TUV" or something like that.
Here in the U.S. motorcycle sealed beam type headlamps come in two sizes, 7" and 5 3/4". Some units use the H-4 replaceable "bulb".
This is the best information I can give you without more information. Good luck.

Posted on Sep 24, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Fitting instructions ford territory hevy duty towbar 2700kg

I would ask the retailer for the instructions.

Nov 03, 2014 | Cars & Trucks

3 Answers

I have a replacement rear bumper/fender (the plastic shell) for my '93 190e 2.0, but its different to the original - the right dimensions, but its one piece that fits right around from one wheel arch to...

YOu can contact Mercedes for a copy of the service manual for your particular vehicle, It cost some money but it will tell you how to basically fix and replace anything . Other than that i cant be any more help , maybe another expert can have a better idea

Jul 14, 2008 | Mercedes-Benz 190-Class Cars & Trucks

1 Answer

How to vacum my spa with pool maintenance kit

if you have the intex kit , it comes with instuctions but hers it ina nut shell , find adaptor plate that fits inside skimmer (flat thing with hose port in middle) assemble sustion head and handle with hose attached and drop into pool (keep handle out) fill hose full so it sort of sinks (no air gaps) snake carefully end of hose over to skimmer (pump running normal) fit plate into skimmer quickly snake hose thru skimmer hole and fit to plate adaptor on hose port , wait a few minutes if flow continues out pump dishcharge then your good to go if not dissasemble and start over , but let filter pick up prime again 1st , do not lift head out of water even to get big stuff off pickup do it in the pool under water

Jul 23, 2014 | Intex Above Ground Swimming Pool Skimmer...

1 Answer

Chrome shell connection problem

It's not the RF Board. These cases seem to have an issue. I had same problem switch to different custom shell controller now works fine think its related to the fit of sync button

Jun 06, 2012 | Microsoft Xbox 360 Replacement Controller...

1 Answer

CS440 treads in cylinder head for spark plug appear to be stripped. Treads chasing tool doesn't help. Is there a way to re-tap the head and insert a sleeve to repair this wonderful saw? Any...

A good machine shop will fit a 14mm heli coil into the torn threads, this will make it as good as new, in most cases stronger than the original thread.

Sep 19, 2011 | Echo CS400 18" Chain Saw

2 Answers

How to replace both headlight bulbs (lowbeam) on jetta 2006?

i would imagine that the bulbs would fit directly into the original harness for the original headlamp bulbs. wear rubber gloves while handling them and open the hood look for the back of the origional headlamps and once found turn them either clockwise or counterclockwise which ever allows movement and once turned as far as they can go pull towards the rear of the car. you should see the old bulb and be able to wiggle it out or pull away the plastic clamps holding the bulb in once removed insert the new bulbs in the place of the old ones and replace them the same way they were taken out.

Jun 01, 2009 | 2006 Volkswagen Jetta

3 Answers

What is the cost of pulsar 150 cc headlight dome?

It costs around 800.... but with fitting charges costs u around 900....

better go for a non branded which will be similar to the original costs around 400 or so... because u may not be knowing when it may gets scratches or breaks... Just think.....


Apr 16, 2009 | 2005 Bajaj Pulsar 150

2 Answers

Broken Hengis

if you havn't had it for a year,, you might be able to take it back where u got it and get a new one,

Dec 09, 2007 | Nintendo DS Lite Console

Not finding what you are looking for?
2004 Harley Davidson VRSCB V-Rod Logo

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5055 Answers


Level 3 Expert

4354 Answers


Level 3 Expert

81285 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides