Question about 2008 Yamaha YZF-R6
BIKE IS NOT STARTING
Posted by Anonymous on
Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
R6 fault Code 46
2008 2009 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
Posted on Sep 06, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
could be a safety shutdown by computer, only your dealer can erase the code....and then you'll find out whats wrong...and why the computer doesn't want you starting and damaging the bike.......Good Luck to you friend....Tim
Posted on May 12, 2009
The dealer or an automotive paint/autobody shop can tell you where the vehicle ID plate. This is different from the VIN plate. Locations differ by make and year. Fastened to a frame member usually.
Posted on Feb 07, 2010
This is from the service manual.
Fault code No.: 60
Symptom: Throttle servo motor: open or short circuit detected. Defective throttle servo motor. Malfunction in ECU (servo motor driving system).
Probable cause of malfunction:
•Open or short circuit in wire harness.
•Defective throttle servo motor (potentiometer circuit).
•Stuck throttle servo motor (mechanism).
•Stuck throttle servo motor (motor).
•Malfunction in ECU.
Posted on Feb 25, 2010
THE OPERATION OF THE CLUTH ON HIS MODEL IS OF CABLE TYPE, IF THE CLUTCH IS OPPERATING CORRECTLY THE 1ST THING TO CHECK WOULD BE THE CABLE, REMOVE THE CABLE YOU SHOULD BE ABLE TO PULL THE INNER WIRE SMOOTHLY TO AND FRO, IF YOU NEED TO USE ALOT OF EFORT TO DO THIS THEN YOU WILL NEED TO REPLACE THE CABLE,MAKING SURE YOU HAVE ADEQUIT FREE PLAY AT THE LEVER WHEN RE FITTED. OBSERVE THE ROUTE THE CABLE TAKES BEFORE REMOVAL AND REPLACE IN THE SAME WAY, YOU MAY ALSO TRY TO GET SOME LITE OIL DOWN THE CABLE, THOUGH I SUSPECT THIS WILL BE ALMOST INPOSSIBLE IF IT IS THIS TIGHT TO OPPERATE
Posted on Aug 15, 2010
Tips for a great answer:
Sep 25, 2016 | Yamaha Motorcycles
May 26, 2014 | 2008 Yamaha YZF-R6
Oct 10, 2013 | 2007 Yamaha C3
Sep 22, 2012 | 2008 Yamaha YZF-R6
Jul 27, 2012 | 2007 Yamaha YZF-R6
May 28, 2012 | 2003 Yamaha YZF-R6
Feb 19, 2011 | 2007 Yamaha YZF-R6
Mar 12, 2010 | 2000 Yamaha YZF-R6
Apr 25, 2009 | 2007 Yamaha YZF-R6
19 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: