Question about 2005 Honda CB 750
Torquing order specs on cyl head valve cover whats the torque sequence for head and valve cover
Posted by Anonymous on
Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Tighten Cylinder Head Screws First Then Torque Head Nuts
torque specs for valve cover bolts Honda Tech Honda Forum Discussion
Honda CB750f2 Manual
Honda CB750F2 Owner Manual
Posted on Aug 06, 2017
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Torque setting
Ok, lets see- I still have my old official shop manual for that bike...Cylinder head nut torque is 16-20 ft lbs,Cam sprocket bolt torque is 12-17 ft lbs, Valve adjuster cover torque is 7-10 ft lbs, Cyl head cover torque is (6mm)- 7-10 ft lbs (7mm) 9-12ft lbs, Rocker arm adjuster nut torque is 11-13 ft lbs.
Posted on Nov 20, 2008
you dont need torque specs on that just use a 1/2 inch drive with you 14mm or16mm socket hold the wratchet right at the top and tighten it as tight as you could get it like that then use wratchet in normal position and just give it a little snugg it will be perfect i have done it a million time on the same type of bikes...
Posted on Dec 05, 2008
Rock the caps around to make sure the bearing locating clips are lined up. Torque the bearing caps to 12 foot-pounds. At this point you must check the valve clearances again. If any are off, the cam must be removed and the correct shims installed.
Please rate this solution. Thanks!
Posted on Apr 07, 2009
Tips for a great answer:
Dec 10, 2015 | Dodge Cars & Trucks
Nov 29, 2015 | Cars & Trucks
Mar 01, 2015 | 1990 Honda Prelude
Sep 30, 2013 | 1972 Honda CB 100
Sep 19, 2013 | 1996 Saturn SL
Aug 02, 2012 | Clymer Honda Cb650 Fours 19791982
Jun 06, 2012 | 2003 Honda CB 900 Hornet
Apr 04, 2010 | 2002 Honda VT 750 DC Shadow Spirit
Nov 13, 2009 | 2005 Nissan Sentra
Jan 11, 2009 | 1988 Chevrolet K1500
30 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: