Question about 2001 Suzuki FXR 150

Open Question

1991sotail custom blinkers wont flash but will light up

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 dyna fxdl and the rear blinker is lighted all the time and dose not flash and when u hit brake light it acts like a brake light and the left front blinker wont flash


Hi Anonymous, check your wiring and connections from the turn signal switch to the turn signal module with a testlite. Make sure all connector pins are corroded, broken, or loose. For a free wiring diagram please visit the website below:
Good luck
Harley Davidson Wiring Diagrams and Schematics

Feb 05, 2014 | 2000 Harley Davidson FXDL Dyna Low Rider

1 Answer

95 LEXUS GS 300 NO 4TH GEAR


Check your fuses if all that stoped @ same time.If blinkers come on and do not flash its your flasher.

Jan 17, 2014 | Lexus GS 300 Cars & Trucks

1 Answer

Blinker issues. Help please.


earthing problem check the earth wire on both light cluster.

Feb 29, 2012 | Cars & Trucks

1 Answer

1998 dodge dakota blinkers


You could have a faulty trafficator can. This can makes a clicking noise for the lights to flash. It appears to be locked on and not clicking.

Feb 06, 2012 | 1998 Dodge Dakota

1 Answer

Turn signals blin continually


There is only a few things that can cause blinkers to blink continually, meaning if your saying they wont shut off, Normally it is the blinker flasher or a fuse. Sometimes it can be in the blinker switch itself. I first would check the flasher, and turn signl fuse. If the blinker stays on and does not flash, still can be bad flasher or fuse or a ground problem, You would then have to check the wires around area where there contact to the tail light blinkers and front blinkers. But first start as said earlier with checking flasher fuse, switch and fuse. Mike

Jan 16, 2012 | 1995 Cadillac DeVille

1 Answer

I have a 1978 yamaha xs750 special. The blinkers worked fine on the left, then I hooked up the right side blinkers and nothing. The front right worked well until I hooked up all blinkers, now front right...


I used to have a 76 XS500. Got lots of compliments with that bike.
The wattage of the bulbs is important on how the blinkers work. The rate they flash, and if they flash is dependant on the current being drawn from the lights. Thats why many times if you have one light out the remaining light may stay on solid or flash faster.
You could try removing one bulb on each side and see if the blinkers work. Then reinsert and remove the other remaining bulbs. If they work normally with one bulb in each side whether front or rear then I would suspect the flasher relay.
Say the fronts work when the rear are out and the rear don't work when the fronts are out then I would suspect either the bulbs or sockets or your solder connection or switch.

You may also look into an electronic flasher. They automaticaly adjust for variable loads to flash so they flash at a normal rate.

Aug 24, 2011 | Yamaha XS 650 SE Motorcycles

2 Answers

Blinker wont work


Replace your "flasher relay, also know as a "blinker relay".Your local auto part store should carry them.

Sep 18, 2009 | 2001 Buick Regal

Not finding what you are looking for?
2001 Suzuki FXR 150 Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...