Question about 2008 Megelli 125 m

Open Question

Adiust timing are the letters L&R on gear wheel guides for timing?

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Starting problems 2000 plymouth voyager


bad key if only 1 key fails.
bad cylinder, (LOCK SMITH TIME)
did you wiggle the steering wheel, at same time and gear shift in park.
read the operators guide.

Oct 16, 2013 | 2000 Plymouth Voyager

1 Answer

I am timing a 2005 Cadillac STS 4.6 northstar went by gm info and re timed 3 times with bad results. I had all my marks lined up but I think I am messing up with the flats on the cams where do they need to...


the crank has to be on tdc for the piston position
on the right hand bank ( left side looking at the front of the engine , the top most cam is the inlet cam and the letters RI will be at the 9 oclock position on the top side of the shaft boss on the cam gear the lower cam gear will have the letters re in the same position
on the other bank the top cam gear will have li at the 3 oclock position and the lower cam gear will have re in the same position
use the position as 90 degrees to the head and taken through the cam shaft center

May 14, 2017 | Cadillac STS Cars & Trucks

1 Answer

How to undo predictive text v3


Hi,

Welcome to Fixya. If you want to undo the preddictive text just follow the guide below.

1. From any text entry screen (ie. when you are writing a text message), press the top center button, the one above the directional wheel.

2. Press on Entry SetUp

3. Select the Primary Set Up or Secondary Setup by choosing your preferred input mode among the ones below. Us the wheel by pressing on the right arrow to change mode:

ITAP: it's a built-in software which predicts the word you are typing. THIS IS PREDICTIVE TEXT

TAP: enter individual letters and numbers by pressing the keys multiple times. Ie. for the letter F press the number 3 button three times.

Tap Extended: enter individual letters, numbers and symbols by pressing the keys multiple times

To change from one mode to the next you can select it by pressing the top center button from a text entry screen, and Press on Entry Mode. Shortcut: you can press the # key on your phone when you are writing a message and you will see abc1 for your primary mode, 123 for numeric; @ for symbols; and abc2 for your secondary mode.
If you have questions please let me know. Thanks for using Fixya.

Apr 04, 2011 | Motorola Mobility RAZR V3

1 Answer

I would like to get my canon inkjet mp 600 to print a letter on my letterhead . So I would like to know how I can change the settings to allow me to manually feed the single letter head while i print the...


To put it in more understandable terms:
Using a CROSS as an example......
Printer are configured in a configuration like this: IN & OUT or
up & down / down & up (,that is A - B). Left to right or right to left (is Y - Z). The computer, with the printer driver does mathematical calculations,knowing exactly where to put the printer head. The head is mounted on a rubber belt, geared to a motor which goes left to right and vice versa. Y Z /Z Y.
The paper is driven in-out (A B/B A ) by rubber wheels (also motor/ gear driven). Using the AB BA / YZ ZY guide formula and the use of motor driven gears & rubber wheels the image is drawn. The printer head itself is a very complicated piece of hardware that uses electricity and heat to release a set amount of ink at a specific time and place.
In order to do it manually, you need to remove the motor or gear(s) as well as know how much to push & pull the paper . It is virtually impossible to do manually .
look here... http://science.discovery.com/videos/deconstructed-how-inkjet-printers-work.html
---------------------------------------------------------------------------------------
Here are 2 pages with your manual and software
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp600#BrochuresAndManuals
----------------------------------------------------------------------------------
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp600#DriversAndSoftware
Your best bet is to use a software with fonts you can produce yourself, and let the computer & the printer do the rest.

Sep 15, 2010 | Computers & Internet

2 Answers

My typewriter (Brother GX-6750) does not print correct letters


look for bent or broken spokes on daisy wheel .turning unit off for 20 seconds and back on should reset the daisy wheel home position. probably the daisy wheel.

Oct 26, 2009 | Brother ML-100 Typewriter

2 Answers

I have a really old SD 660 and I no longer have manual. It is printing great but it is not typing correct letter for example when you type a it prints the letter p and so on?


Remove the printwheel check for bent spokes, look for debris in that area, try it without the correction tape, check that the correction tape is dry not tacky, also check to see if the pitch selection isn't in PS proportional space. If allis good the homing pawl spring is probably broken, you need a tech.

DickyO

Jun 26, 2009 | Smith Corona Office Equipment & Supplies

2 Answers

Wheel is not setting up to type correctly


The keeys were getting caught in the plastic guide. Tood guide off and now no more problem!! Thanks anyway!!

Jun 03, 2009 | Swintec Office Equipment & Supplies

3 Answers

Schwinn S40 DSX part name


Forget new guide wheels. A new rear derailer is the real fix. You will need to order a new one by the number of gears on the rear gear cluster. How the derailer is mounted, Which way it moves when by the spring direction etc... By the way, get a higher quality one than the one you have got. If you go megawheel on the lower guide wheel; which I recommend, you might need a couple more segments in your chain. Yes, you need a new chain. If you wore out a part on you derailer, your chain is getting old. I recently bought a new rear derailure for my wife's bike for 29 bucks at a much better quality than the old one. It does not have problems of getting between gears, clicking etc... like the old one did new.

May 30, 2009 | Quad 47 cc / 49 cc Pocket Mini Bike...

1 Answer

Types wrong Characters


Does it always type the same wrong letter ie a always prints u or w ? if so the print wheel drive gear is out of position. if not and it get random letters some thing may be interfering with the wheel rotation.

Jul 04, 2007 | Smith Corona Wordsmith 200 Typewriter

Not finding what you are looking for?
2008 Megelli 125 m Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Megelli Experts

paul cavanagh

Level 1 Expert

47 Answers

ray gallant

Level 3 Expert

44414 Answers

Shaun Thompson
Shaun Thompson

Level 2 Expert

398 Answers

Are you a Megelli Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...