Question about 2000 Suzuki VS 1400 Intruder

Open Question

Bleed clutch but not engaging - 2000 Suzuki VS 1400 Intruder

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
mb50sa
  • 79 Answers

SOURCE: We rebult clutch and now

I had a similar problem and found that when I put the clutch back in, it wasnt quite seated correctly, i,e one of the bolts that go onto the springs was catching on the basket. This gave the same symptoms as you have. Also, is the cluch slave cylinder operating correctly? Might be worth removing it and checking the clutch is pushing the slave cylinder plunger forward.

Posted on Sep 16, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 ford focus 2.0liter. clutch pedaL GOES TO FLOOR. brake master full of fluid.I clutch master or clutch slave cylinder bad?


a plastic master cyl !

master cyl is bypassing internally

slave cylinder is inside the gearbox bell housing
if its leaking .....gearbox out




26351104-h2ljceqgvzc5xcxajl4olrsz-4-0.jpg

26351104-h2ljceqgvzc5xcxajl4olrsz-4-1.jpeg

26351104-h2ljceqgvzc5xcxajl4olrsz-4-3.jpg

Nov 11, 2016 | 2004 Ford Focus

2 Answers

My clutch will not engage.


First make sure that the problem is the clutch not engaging instead of not releasing The slave cylinder only releases the clutch Put the car in any gear and try to move it if it won't roll easily the clutch is engaged If this is the case you probably need to bleed the air out of the line between the clutch master and slave cylinders

Apr 18, 2016 | GMC Sierra 1500 Cars & Trucks

2 Answers

Clutch advice for 05 hilux seems to have no adjustments?


Have you tried bleeding the system. It is done in the similar way as bleeding brakes to remove air. If that doesn't fix it, it may well be in need of a new clutch.

Oct 26, 2015 | Cars & Trucks

1 Answer

Installed new clutch assy now wont engage


do you mean disengage? check for a bent clutch fork, good luck.

Jul 07, 2013 | 1991 Chevrolet S-10

2 Answers

2006 chevrolet cobalt clutch issues


Just because the master is new does not mean it isn't faulty. If you are certain you have bleed all the air from the system, I suspect you got a bad master.

Nov 21, 2012 | 2006 Chevrolet Cobalt

1 Answer

How to bleed clutch kawasaki zx7 1998


Sounds more like worn dogs on your 2nd gear...bleeding clutch is the same as the brakes...make sure there is fluid in the master and bleed from the slave cyl nipple down by the front sprocket casing

May 29, 2012 | kawasaki ZX-7R Motorcycles

1 Answer

If you pump the clutch lever it will engage the clutch. when you pull in the lever without doing this it will not engage. How do i fix this problem?


Take cover off the clutch reservoir and check the fluid level. Fill it if necessary. Look for leaks between the clutch lever/reservoir, down the hose to the clutch slave cylinder. If no leaks visible, slowly squeeze clutch lever and release, watching for air or fluid pumping in the reservoir. Repeat until clutch has a solid pull. If the pull doesn't improve and stay good, you'll need to bleed the hose and slave cylinder. Locate the bleed valve at the clutch, squeeze the lever till it's a good solid pull, hold it in, and open the bleed valve. Watch for air bubbles. After doing this several times, you should get nothing but fluid. Refill the reservoir and close it. Good riding

Apr 18, 2011 | Suzuki VS 800 Intruder Motorcycles

1 Answer

I need help changing out the master cylinder in my '94 toyota 4x4 pickup truck. It is a 5speed, i have already changed out the slave cylinder and installed the master cylinder but i still can not get the...


did you bleed the system?? you must bleed the system from the clutch slave. if this has been done, I need more info!! How does the clutch pedal feel, is the clutch slave engaging at all??

Sep 27, 2010 | 1994 Toyota Pickup

1 Answer

Clutch fails to dis-engage clutch. 1986 F250 3/4ton 7.5 2wd


Make sure the slave cylinder body is attached firmly, then bleed the air out of the hydraulics--similar to bleeding brake lines. Watch the clutch mechanics while someone operates the clutch, (engine off) you should see definite movement. If you get movement and no clutch action, you may have to reappraise your clutch installation. Hope this helps!

Dec 19, 2009 | 1986 Ford F 250

1 Answer

Clutch goes to floor will not engage


Bleeding won't fix it,If it can be put in gear and car doesn't move your clutch is no good.

May 28, 2009 | 1994 Dodge Stealth

Not finding what you are looking for?
2000 Suzuki VS 1400 Intruder Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...