Question about Yamaha Motorcycles

1 Answer

I have a 1995 yamaha timberwolf and it will not start why

New rings,timingchain,and valves and it run for awhile then quit and will not restart.why?

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Prodigy:

    An expert who has answered 500 questions.

  • Yamaha Expert
  • 545 Answers

Firstly check that the timing chain is still intact or that the sprockets are timed correctly, if so then you need to check to see if you have a spark at the plug's, if you do then your problem is definetly fuel,If you don't have a spark the start looking and working backwards from the plugs first, then on to your plug cap,s ,ht lead's and back to the cdi unit

Posted on Mar 10, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 Yamaha Timberwolf 250 will not turn over. Took it to someone they said it was stator. Replaced stator and spark plug still wont turn. There's no noise anywhere.


Hi, Anonymous and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Tip over sensor needs a reset.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
1994 Yamaha Timberwolf 4x4 Electric Start Problems
no fire 96 timberwolf
http://www.mikekekich.com/92-98%20Timberwolf%202WD%20Service%20Manual.pdf
OEM parts for Yamaha
Yamaha YFB250K Timberwolf Owner Manual

Jan 13, 2017 | Yamaha Motorcycles

1 Answer

Reset timing on 1995 250 Yamaha 4wheeler


Hi, Dessie sorry you can't find the first and best tool you ever bought for your Yamaha despair not for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Yamaha timberwolf 250 setting timing and valve setting
YouTube How To Set Cam Timing
ATV Connection
http://www.yamaha-motor.com/assets/service/manuals/1999/lit-11626-12-45_339.pdf

Apr 14, 2016 | Yamaha Motorcycles

1 Answer

1995 Timberwolf. When I try to start it, all I get is a click and it will not go into gear. What's wrong?


Hi, Brooke it should be noted that in order to "PROPERLY" diagnosis any electric starter issue it is "IMPERATIVE" that you begin with a fully charged battery 12.5 volts or better and be able to pass a proper load test, and the usual suspects are:
1. Battery terminals have loose or corroded connections.
2. Battery cables faulty due corroded or broken internal wiring at the cable connector especially the "NEGATIVE" cable which needs to be checked at "BOTH" ends.
3. Battery voltage, 12.5 volts or better,to the main circuit breaker to the ignition switch to the security/ignition fuse to the TSM/TSSM module to the engine stop/run switch to the starter button to the starter relay to the green wire that connects to the starter solenoid has dropped more than 1/2 volt.
4. With a voltmeter connected to the battery, the ignition switch in the on position, the kill switch in the run position, the starter button depressed, starter engagement should not bring voltage below 8-9 volts.
If a lower voltage is produced a proper battery load test should be performed with a load tester to validate battery integrity or battery replacement.
5. Faulty starter relay, check continuity.
6. Faulty starter solenoid, check contact plate and shoes for excessive electrical erosion/etching, refurbish as necessary or invert contact plate and use the virgin backside. Check contact shoes for being loose. Replace solenoid if the negative function is still a final outcome.
7. Faulty starter, bench test starter with a 12-volt battery if negative function check, decontaminate and undercut armature commutator segments as necessary, check segments with an ohm-meter probe each one and the segment next to it for shorts. Have the armature tested with a growler and field coils, and brush plate with an ohm-meter for opens, shorts or grounds. Replace brushes if less than .438" It is generally cheaper to overhaul/refurbish a starter motor than buy a new one.
For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day.
1994 Yamaha Timberwolf 4x4 Electric Start Problems
http://www.off-road.com/atv/tech/atv-answerman-your-offroad-atv-questions-answered-52130.html
how to fix starter problems Just clicks yamaha warrior update and starter...
https://www.tradebit.com/filedetail.php/278979958-yamaha-timberwolf-250-1992-1995-service-repair-manual

Mar 05, 2016 | Yamaha Motorcycles

1 Answer

1994 Yamaha 250 timberwolf piston ring replacement


YAMAHA TIMBER WOLF 250 ENGINE OVER HALL ANN ...

? 3:08
www.youtube.com/watch?v=0fypjxwZV40
May 16, 2010 - Uploaded by omar arriaga
HERE IS MY NEW PROJEC PAINTING MY 250 TIMBER WOLFIM REPARING ... back break replacement on Yamaha timberwolf 250cc tutorial ...

Sep 12, 2015 | Yamaha Motorcycles

1 Answer

'92 yamaha timberwolf valve adjustment


Here's the info you're looking for.

1992-1998 Yamaha Timberwolf 2WD and 4WD
Intake: 0.05 - 0.09 mm (0.002 ~ 0.004 in)
Exhaust: 0.11 - 0.15 mm (0.004 ~ 0.006 in)

Jun 20, 2014 | RTO 200cc Full Size Four Wheeler ATV

2 Answers

1997 yamaha 250 timberwolf overheating


look for the thermstat and change out because of sticking.Over heating will cause rings not to have the ridge force needed to keep compression at normal .

Jun 03, 2014 | Yamaha Timberwolf 250 2wd 97 Airbox Air...

1 Answer

250 timberwolf


consult manual this is a little involved need to follow instructions very carefully. Damage to valve can occure when done wrong.

Mar 31, 2014 | Yamaha Timberwolf 250 2wd 97 Airbox Air...

1 Answer

My 1995 ssimpala want crank


You cross up the spark plug wires,

Nov 03, 2012 | 1995 Chevrolet Impala

2 Answers

Yamaha timberwolf 250


My 1994 Yamaha Timberwolf starts but won't idle properly. Sometimes when it quits it backfires. What could the problem be?

Aug 13, 2009 | 1996 Yamaha FZX 250 Zeal

6 Answers

What is valve clearance for a 250 yamaha timberwolf


what an *******. If I had a manual or my library had one I wouldnt be asking the question. If I need help fixing something dont tell me to go jump in a lake just dont answer

Apr 05, 2009 | 2003 Yamaha YZ 250

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...