Question about 2001 Triumph 955i Speed triple

1 Answer

Triumph single side swingarm suspention setup

Hello i wonded if anybody had a picture of triumph 955 single side swingarm suspention setup because iam fitting one into a 1200 bandit
thankyou

Posted by on

  • 1 more comment 
  • bikersjl Jun 19, 2009

    i was hoping to get a picture of the suspention fitted to the bike

  • bikersjl Jun 19, 2009

    i was just after a picture of the suspention fitted to the bike so i could see the angle of the linkages on the bottom of the spring sorry if i dont explane my self very well

  • Luke Smith
    Luke Smith Nov 22, 2016

    Have you tried poking around a website that sells motorcycle parts? My uncle is a big Harley fan and I believe he mentioned something to me once that there are lots of web forums devoted to specific brands of motorcycle. It could be a good place to post this same question and get the picture you're looking for.
    http://www.allthingstriumph.com/

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 948 Answers

You can see the parts microfiche at http://www.bikebandit.com/triumph-motorcycle-speed-triple-2001/o/m17577

Posted on Jun 19, 2009

  • Dick
    Dick Jun 19, 2009

    That IS a picture, an exploded view. Did you not even look?

  • Dick
    Dick Jun 19, 2009

    Go back and read the ratings FAQ and rate this solution appropriately. If you wanted something specific you should have asked for that in the first place. Even if this information isn't what you had in mind it is still helpful, it shows every component and every part number for the bike you asked about.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Are there any specific handlebar riser's on the market for a 2008 Sprint ST 1050 which are worth buying?


Hi, Glenn the answer to this question is way above my pay grade and for this situation, I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Handlebar risers Triumph Sprint ST 955 01 04 Sprint ST 1050 05 Sprint RS...
Bar Riser Install on 2005 Sprint ST 1050
Triumph Sprint ST Service Manual
http://www.triumphestore.com/
Triumph Sprint ST Owner Handbook Manual

Apr 28, 2017 | 2008 Triumph Sprint ST

1 Answer

My triumph 955i 2003 Starts but won't move


Hi, Mellymel you may have a clutch issue for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your problem. For more information about your issue and valuable free downloads that you will need please visit the websites below. Good luck and have a nice day.
955 Clutch adjustment Problem Solving Tech Forums Messageboard Triumph...
Morgo Triumph 750 issues Smoothing clutch adjustment FIX YOUR RIDE 3 10
2002 Triumph Daytona 955i Speed Triple Motorcycle Service Repair Manual...

Feb 23, 2016 | Triumph Motorcycles

1 Answer

Backfiring on triumph st sprint 1999


After-market exhaust system or stock?

A lot of after-market mufflers don't cover up a backfire pop on over-run in the way that the stock system does. Look at The Marble Mod on GIXXER forums for ways to doctor the bike's emissions system to stop the popping.

Another cause of an over-run backfire may be a slight leak where the header pipes emerge from the cylinder head. Check the bolts are tight. Consider new copper washers.

Nov 14, 2013 | 1999 Galfer-2001 Triumph Sprint ST 955...

1 Answer

How do you tighten the chain on a signle sided swingarm?


There is a bolt (17mm I believe) in back of the axle and to the right of the chain. Loosen this bolt and using a hook spanner on the notched ring which is on an eccentric, turn forward to reduce chain slack. If you have the Triumph tool kit there should a spanner with an extension handle included. Otherwise buy or borrow an adjustable spanner that will fit the notched ring. (About six inches in diameter.) The torque on the clamp bolt is about 40.6 lbs. (55 Nm)

Jul 25, 2010 | 2000 Triumph Sprint ST

1 Answer

How to replace headlamp bulbs on Triumph Tiger 955(2006)


Remove the screen 4 plastic bolts,

Remove the indicator mounts, 3 screws, 1 is to inside of the tank on either side of the headstock. you can let them dangle on the wiring if so desired.

Remove the bolts under the screen and the bolts under the indicator mounts , hex bits required.

Remove the fairing from the bike.

3 allan bolts, 1 ether side and one underneath support the headlight assembly. Once these are slackened you will have access to the rear of the lights.

Reassembly is the reverse, allow 45 mins to an hour to complete the job,

Apr 19, 2010 | 2004 Triumph Tiger

2 Answers

Im trying to replace the swingarm


Is it a through bolt? Does it spin on one end while turning the other? Put the nut back on and tap it with a lead hammer, see if it is just a big bolt, then drive it out the rest of the way with a dowel. Hope this helps.

Mar 25, 2010 | 2004 Triumph Tiger

1 Answer

Was swiped into a curb back passenger tire hit curb now i have bent bars on the inner side just want to now what these parts are called


these cars have indepentant rear suspention with mant moving parts possible upper and lower control arms,rear swaybar, torsion bar very hard to say with out pictures. recommend garage and put on lift tire removed and inspection by trained tech. comparing setup to a suspention diagram

Feb 09, 2010 | 1992 Lexus Sc 300

2 Answers

Are the triumph 2001 sprint st 955 and 1050 rear shocks interchangable? Thanks


yes as far as i know they are all interchangable as long as they are the same year

Oct 17, 2009 | 2001 Triumph Sprint ST

Not finding what you are looking for?
2001 Triumph 955i Speed triple Logo

Related Topics:

646 people viewed this question

Ask a Question

Usually answered in minutes!

Top Triumph Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Triumph Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...