Question about 2001 Suzuki Epicuro

Open Question

On my bike there is a ignition cover and i cant get my key in now

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i start my scooter with no key and no kickstart


No key?
You would need to hotwire the ignition. If you got caught with a hotwired bike the cops would start to ask hard questions.

No Kick start?
If it has a manual clutch you can turn the ignition on put it into second gear run push the bike up to running speed jump on it and release the clutch quickly to engage the engine.If its a centrifugal clutch (twist and go!) you cant bump start it.

But reading your question, I would ask whether you scooter is road worthy. Running and jumping on a moving bike with live electrical cables hanging out of it in a fuel rich environment is probably not a good idea!

Apr 15, 2015 | Motorcycles

1 Answer

I have a 2001 FLHTC. When the ignition switch is put in the run position most of the time the red key light on the speedo does not come on and I get nothing from the start switch. If I turn the ignition on...


More than likely a relay has deteriorated. As far as I can remember the systems relay are in the fuse boxes inside the covers on the side of the bike. Check under both covers to find it.

Nov 01, 2013 | Harley Davidson FLHTC Electra Glide...

1 Answer

2010 Malibu key wont go into ignition switch


The tumblers may have collapsed. In which case you would have to replace the switch. They can be replaced if you can get the key in.. If you get a replacement you can try forcing it, if it locks up you will have to drill it out to get it replaced.

Jun 17, 2013 | 1999 Chevrolet Malibu

1 Answer

All my electrics went down on my strada 05 plate, rev counter resets itself and the immobiliser light flashes but the digital screen does not show any signs of life, has it broken?


Insert the key in the ignition switch, switch on as if to start the bike. Pull the wire up and down that comes out of the bottom of the ignition switch. The pegaso's engine vibration tends to dis the solder joint inside the ignition switch. resoldering it doesn't solve the issue. Those units are expensive and I bypassed mine with a toggle switch. Be sure to install it out of the rain. They cannot start the bike without the coded ignition key, but the can open the tank cover and steal your fuel or throw something in it, so beware.

Nov 14, 2010 | 2007 Aprilia Pegaso 650

2 Answers

How to hot wire my ninja ex500


listen everyone knows if you wanna steal a bike just order a new ignition on ebay and take a hammer and knock out the old ignition and replace it with the new ignition and your done... SO with that being said who is gonna steal a ninja 500 they are so abundant the parts cant even be sold for much money so that means he probably doesnt want to steal a bike or pay 175.00 bucks to a shop... and most shops wont make keys sooo mwoodring1 if you dont know dont post...to answer your question just pop the top of the ignition with a hammer or screw driver and turn the plastic rectangle at the bottom to start and hit the selinoid or starter button...

Apr 19, 2010 | 1996 kawasaki KLE 500

1 Answer

My key is stuck in the ignition of my 2002 Kia Spectra. It turns on and off, but I cant remove the key.


u'll hv 2 loosen u ignition cover and check d setting. or its possible the is a botton beside the ignition u need to press before the key comes out

Apr 11, 2010 | 2002 Kia Spectra

1 Answer

I am having trouble figuring out how to remove the key switch


  1. Remove the screws on the underside of the steering column cover and pull the cover down.
  2. Put the key into the ignition and turn the key to the "II" position.
  3. Slide the punch pin into the Silverado's access hole on the underside of the steering column under the ignition.
  4. Push up on the punch pin while you pull the ignition out of the steering column.

Jan 05, 2010 | 1991 Chevrolet C1500

1 Answer

I have lost a key for a honda cbr 1000 2004. is there any way of over-riding the honda ignition security system so the bike can start. i have also been to a honda dealer and they cant do it but they say...


I would be amaized if there was an easy bypass for this. I would really start looking for that key. The key, barell and ECU are matched. If you lose a key with a HIPS equiped bike you are in or a big bill as all 3 units need replacing. There is a chip in the key which is matched to a coil in the ignition which has a code embeded in the ECU. Good luck.

Jul 22, 2009 | 2004 Honda CBR 1000 RR Fireblade

1 Answer

Igniton switch


The numbers you saw are the right numbers. I know I make motorcycle keys.

Nov 20, 2008 | 2001 BMW R 850 C

Not finding what you are looking for?
2001 Suzuki Epicuro Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...