Question about 1999 Suzuki VZ 800 Marauder
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Adjustable rear shocks
There are 2 holes at the base of the shock absorbers. Turn them clockwise for a softer drive. At factory they are setted at 3. THey go from 1 to 6.
Posted on Mar 07, 2009
the bike should be straight up and down and the oli level should be in the middle of the glass you bike should take around 4 qts
Posted on May 15, 2009
• Place the front fork vertically without spring.
• Compress it fully.
• Pour specified front fork oil up to the top level of the outer
Capacity (each leg): 490 ml (16.6/17.3 US/lmp oz)
99000-99044-L01: SUZUKI FORK OIL L01
or an equivalent fork oil
• Move the inner rod slowly with the special tool ten times and
more until no more bubbles come out from the oil.
09940-52841: Inner rod holder
Refill front fork oil up to the top of the outer tube so that bubbles
are visible while bleeding air.
• Refill specified front fork oil up to the top level of the outer
tube again. Move the outer tube up and down several strokes
until no more bubbles come out from the oil.
• Keep the front fork vertically and wait 5 – 6 minutes.
* Always keep oil level over the cartridge top end, or air may
enter the cartridge during this procedure.
* Take extreme care so as to pump out air completely.
• Hold the front fork vertically and adjust fork oil level with the
When adjusting the fork oil level, compress the outer tube fully
without the fork spring.
Fork oil level: 153 mm (6.02 in)
09943-74111: Front fork oil level gauge
Posted on Dec 20, 2009
On the left side of the bike at the rear should be a chrome(or black) plastic cover made to look like part of the tranny. Should be 3 bolts holding it on. Pull that and your overflow tank will be right there
Posted on Apr 02, 2010
Testimonial: "thank you very much brilliant service"
Could be a combo of all. Replace your spark plugs sync carbs, and run it to see how it responds before you mess with the mixtures. Also check for any vacuum leaks. Hope this helps.
Posted on Jul 29, 2011
Tips for a great answer:
Apr 05, 2016 | Suzuki Motorcycles
Aug 30, 2015 | Suzuki Motorcycles
Jul 18, 2015 | Motorcycles
Jun 19, 2015 | 2003 Suzuki VZ 800 Marauder
Jan 20, 2013 | 2003 Suzuki VZ 800 Marauder
Jul 23, 2012 | 2000 Suzuki VZ 800 Marauder
Apr 11, 2017 | 2003 Suzuki VZ 800 Marauder
Jun 30, 2017 | 1999 Suzuki VZ 800 Marauder
57 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: